AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS3898/8A
En Vigor
2022-04-13
Interleaf Carrier Material, Composite Tape/Broadgoods Kraft, Differentially Coated Paper, Unperforated 0.0038 inch ± 0.0004 (0.097 mm ± 0.010)
 
SAE

SAE AMS4982D
En Vigor
2007-06-13
Titanium Alloy Wire 44.5 Cb
 
SAE

SAE AMS4123D
En Vigor
1968-05-01
ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T651) Stress-Relief Stretched
 
SAE

SAE AMS4725F
En Vigor
2018-01-02
Copper-Beryllium Alloy Wire 98Cu - 1.9Be Solution Heat Treated
 
SAE

SAE AMS4028D
En Vigor
1974-12-01
ALUMINUM ALLOY SHEET AND PLATE 4.5Cu - 0.85Si - 0.8Mn - 0.50Mg (2014-0)
 
SAE

SAE AMS5356
En Vigor
2011-08-10
STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT 15Cr - 4.6Ni - 0.22(Cb + Ta) - 2.8Cu Solution and Precipitation Heat Treated 130,000 psi (696 MPa) Tensile Strength
 
SAE

SAE AMS2635B
En Vigor
1967-04-01
RADIOGRAPHIC INSPECTION
 
SAE

SAE AGS883-5
En Vigor
1945-11-09
AGS883 4 B.A. Studs
 
SAE

SAE AMS2525F
En Vigor
2026-01-04
Graphite Coating, Thin Lubricating Film, Impingement Applied
 
SAE

SAE AMS4730F
En Vigor
2007-05-15
Nickel-Copper Alloy Wire, Corrosion-Resistant 67Ni - 31Cu Annealed (400)
 
SAE

SAE AMS4154F
En Vigor
1962-06-01
ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.3Cr (7075-T6)
 
SAE

SAE AMS4071H
En Vigor
1979-01-01
ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND 2.5Mg - 0.25Cr (5052-0) UNS A95052
 
SAE

SAE AIR818E
En Vigor
2020-02-20
Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For
 
SAE

SAE AMS4250B
En Vigor
2018-03-23
Aluminum Alloy, Plate 8.1Zn - 2.3Mg - 1.0Cu - Zr (7449-T7651) Solution Heat Treated, Stress Relieved, and Overaged
 
SAE

SAE AMS4439E
En Vigor
2001-05-01
Magnesium Alloy Castings 4.2Zn - 1.2Ce - 0.7Zr (ZE41A-T5) Precipitation Heat Treated
 
SAE

SAE AIR1494B
En Vigor
2010-04-13
Verification of Landing Gear Design Strength
 
SAE

SAE AMS4966K
En Vigor
1994-06-01
TITANIUM ALLOY, FORGINGS 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
 
SAE

SAE AMS5744C
En Vigor
2011-08-15
STEEL BARS AND FORGINGS, CORROSION AND MODERATE HEAT RESISTANT 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170,000 psi (1170 MPa) Tensile Strength
 
SAE

SAE AMS4046B
En Vigor
1967-11-01
ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (Alclad One Side 7075-T6)
 
SAE

SAE AMS4915F
En Vigor
1984-04-01
TITANIUM ALLOY SHEET, STRIP, AND PLATE 8Al - 1V - 1Mo Single Annealed