AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS4003D
En Vigor
1967-11-01
ALUMINUM SHEET AND PLATE (1100-H14)
 
SAE

SAE AMS4973E
En Vigor
2003-05-07
Titanium Alloy Forgings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized
 
SAE

SAE AIR1266
En Vigor
1993-06-01
FAULT ISOLATION IN ENVIRONMENTAL CONTROL SYSTEMS OF COMMERCIAL TRANSPORTS
 
SAE

SAE AMS4764D
En Vigor
1992-04-01
COPPER ALLOY BRAZING FILLER METAL 52.5Cu - 38Mn - 9.5Ni 1615 to 1700 °F (879 to 927 °C) Solidus-Liquidus Range
 
SAE

SAE AMS2640C
En Vigor
1950-06-01
MAGNETIC PARTICLE INSPECTION
 
SAE

SAE AMS5372C
En Vigor
2000-11-01
Steel Castings, Sand, Corrosion Resistant 16Cr - 1.9Ni (Type 431 Mod) Normalized and Tempered
 
SAE

SAE AMS2980/2B
En Vigor
2021-09-24
Carbon Fiber Fabric and Epoxy Resin Wet Lay-up Repair Material Part 2 - Qualification Program
 
SAE

SAE AMS3804E
En Vigor
2016-06-20
Cloth, Airplane, Cotton, Mercerized 65 Pounds (290 N) Breaking Strength
 
SAE

SAE AS1911C
En Vigor
2015-01-22
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, STRAIGHT TO 90°
 
SAE

SAE AS2128-4
En Vigor
1948-02-17
AS2128 Plunger - Pilot's Seat Raising Gear
 
SAE

SAE ARP1785B
En Vigor
2013-01-02
Standard Codes for Outer Sleeving on Hose Assemblies
 
SAE

SAE AIR5301A
En Vigor
2017-11-29
Installed Outdoor Engine Testing
 
SAE

SAE AMS5703C
En Vigor
2000-09-01
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution, Stabilization, and Precipitation Heat Treated
 
SAE

SAE AMS4250C
En Vigor
2019-01-02
Aluminum Alloy, Plate 8.1Zn - 2.3Mg - 1.0Cu - Zr (7449-T7651) Solution Heat Treated, Stress Relieved, and Overaged
 
SAE

SAE AMS7488A
En Vigor
1960-01-01
RINGS, FLASH WELDED Aluminum and Aluminum Alloys
 
SAE

SAE AMS3619B
En Vigor
1991-10-01
RESIN, POLYIMIDE, LAMINATING High Temperature Resistant, 315°C (600°F)
 
SAE

SAE AIR3260
En Vigor
2018-08-23
Identification of Standard Utility Parts - Bolts and Nuts
 
SAE

SAE AMS5653K
En Vigor
2024-10-21
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forging and Rings 17Cr - 12Ni - 2.5Mo (0.030 Max C) (316L), Solution Heat Treated
 
SAE

SAE AMS4908A
En Vigor
1957-07-01
TITANIUM ALLOY SHEET 8Mn Annealed - 110,000 psi Yield
 
SAE

SAE AMS6421E
En Vigor
2006-06-21
Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B (0.35 - 0.40C) (Modified 98B37)