AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AS3484B
En Vigor
2007-02-07
GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS 5553
 
SAE

SAE AMS6371C
En Vigor
1951-10-01
STEEL TUBING, MECHANICAL 0.95Cr - 0.2Mo (0.28-0.33C) (SAE 4130)
 
SAE

SAE EIA601A
En Vigor
2015-07-01
General Procedure for Capability Approval of Electronic Components
 
SAE

SAE AS1366A
En Vigor
2014-10-29
ELBOW, 90°, FLARED TUBE BULKHEAD UNIVERSAL, FOR SEAL RING
 
SAE

SAE AS1501D
En Vigor
2020-06-10
Hose, Air Duct, Flexible, Nonmetallic, Aircraft
 
SAE

SAE AS85049/153
En Vigor
2022-08-04
CONNECTOR ACCESSORIES, ELECTRICAL, RFI/EMI, STRAIN RELIEF, 90 DEGREE, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
 
SAE

SAE AMS6322B
En Vigor
1945-08-01
STEEL .55 Ni .5 Cr .25 Mo (.38-.43C)
 
SAE

SAE AS9534B
En Vigor
2015-11-02
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A
 
SAE

SAE AMS6454C
En Vigor
2001-10-01
Steel, Sheet, Strip, and Plate 1.8Ni - 0.80Cr - 0.25Mo (0.38 - 0.43C) (SAE 4340) Consumable Electrode Melted
 
SAE

SAE AS8712
En Vigor
2013-01-09
Valve; Air Relief, Low Pressure
 
SAE

SAE ARP492C
En Vigor
2021-03-09
Aircraft Engine Fuel Pump Cavitation Endurance Test
 
SAE

SAE AMS5804E
En Vigor
1993-01-01
STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 15Cr - 25.5Ni - 1.3Mo - 2.2Ti - 0.006B - 0.30V
 
SAE

SAE AMS6413C
En Vigor
1954-05-01
STEEL TUBING, MECHANICAL 0.8Cr - 1.8Ni - 0.25Mo (0.35-0.40C) (SAE 4337)
 
SAE

SAE AMS5683B
En Vigor
1951-06-01
ALLOY WIRE, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 8Fe Cold Drawn
 
SAE

SAE AS104-8
En Vigor
1994-02-01
AS104 Pulley Ballbearing 3.0 DIA
 
SAE

SAE AMS5558C
En Vigor
1979-01-15
STEEL TUBING, WELDED, CORROSION AND HEAT RESISTANT 18Cr - 10.5Ni - 0.70 (Cb + Ta) (SAE 30347) Thin Wall
 
SAE

SAE J529_198503
En Vigor
1985-03-01
FUEL INJECTION TUBING
 
SAE

SAE AS3589A
En Vigor
2008-09-03
PIN AND PLUG, EXPANSION SET OF PARTS, AL ALLOY 2024-T4 AND 2024-T351, LONG; STD AND .010 OVERSIZE DIAMETERS (UNS A92024)
 
SAE

SAE AMS5661G
En Vigor
2018-08-17
Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe Consumable Electrode or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated
 
SAE

SAE AS7102/1A
En Vigor
2008-07-30
National Aerospace and Defense Contractors Accreditation Program, Requirements for Brazing