Normas SAE
Filtrar:
SAE
SAE
SAE
SAE AMS2471C
En Vigor
1974-12-01
ANODIC TREATMENT OF ALUMINUM ALLOYS Sulfuric Acid Process, Undyed Coating
SAE
SAE
SAE AMS2482E
En Vigor
2017-07-17
Hard Anodic Coating on Aluminum Alloys Polytetrafluoroethylene
(PTFE)-Impregnated or Codeposited
SAE
SAE AMS3731/10B
En Vigor
1993-01-01
POTTING COMPOUND, EPOXY Bisphenol A-Type Unfilled, Room Temperature
Cure, Semiflexible
SAE
SAE
SAE
SAE
SAE
SAE AMS4845J
En Vigor
2015-12-04
Tin Bronze Castings, Sand and Centrifugal 87.5Cu - 10Sn - 2Zn As Cast
SAE
SAE AMS4163A
En Vigor
1977-01-01
ALUMINUM ALLOY EXTRUSIONS 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti
(2219-T3511) Solution Heat Treated and Stress-Relieved by Stretching
SAE
SAE AMS2471B
En Vigor
1965-02-01
ANODIC TREATMENT OF ALUMINUM BASE ALLOYS Sulfuric Acid Process, Undyed Coating
SAE
SAE
SAE AMS4162G
En Vigor
2025-04-14
Aluminum Alloy, Extrusions, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti
(2219-T8511), Solution Treated, Stress Relief Stretched, Straightened,
and Precipitation Heat Treated
SAE
SAE AMS4220D
En Vigor
1995-05-01
ALUMINUM ALLOY CASTINGS, SAND 4Cu - 2Ni - 1.5Mg - 0.2Cr (A142-T75)
Solution Treated and Overaged
SAE
SAE AMS3777/4A
En Vigor
1993-01-01
TAPE, NYLON, NONMELTING, REINFORCING 1–1/2 (38) Wide, 1500 (6670 N)
Breaking Strength
SAE
SAE AMS5316C
En Vigor
2011-08-10
DUCTILE (NODULAR) IRON CASTINGS, SAND 80,000 psi (550 MPa) Tensile
Strength As Cast
SAE
SAE AMS3066
En Vigor
2011-08-08
COMPOUND, CORROSION-INHIBITING Water-Displacing, Soft Film, Aerosol Canned
SAE
