AENOR Logo

Normas ISO

58085 Resultados disponibles

Filtrar:

(30509)
(27576)
ISO

ISO 23821:2022
En Vigor
2022-08-15
Cosmetics — Analytical methods — Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion
ISO

ISO 20589:2025
En Vigor
2025-08-29
Glass in building — Determination of the emissivity
ISO

ISO 22915-15:2020
En Vigor
2020-04-14
Industrial trucks — Verification of stability — Part 15: Counterbalanced trucks with articulated steering
ISO

ISO 15765-5:2023
En Vigor
2023-11-10
Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 5: Specification for an in-vehicle network connected to the diagnostic link connector
ISO

ISO 21045:2018
En Vigor
2018-08-13
Tobacco and tobacco products — Determination of ammonia — Method using ion chromatographic analysis
ISO

ISO/TR 15069:2018
En Vigor
2018-09-19
Series 1 freight containers — Handling and securing — Rationale for ISO 3874:2017, Annexes A to E
ISO

ISO 23551-12:2023
En Vigor
2023-10-06
Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 12: Multifunctional controls with integral overpressure protection safety function (OPSF) for use with butane gas cartridges used in portable gas appliances
ISO

ISO 20902-1:2018
En Vigor
2018-03-15
Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries — Part 1: General requirements
ISO

ISO 14287:2021
En Vigor
2021-07-29
Plain bearings — Pad materials for tilting pad bearings
ISO

ISO 20468-7:2021
En Vigor
2021-06-22
Guidelines for performance evaluation of treatment technologies for water reuse systems — Part 7: Advanced oxidation processes technology
ISO

ISO/TS 23511:2023
En Vigor
2023-05-18
Biotechnology — General requirements and considerations for cell line authentication
ISO

ISO 19984-3:2017
En Vigor
2017-08-14
Rubber and rubber products — Determination of biobased content — Part 3: Biobased mass content
ISO

ISO 2827:1988
En Vigor
1988-08-18
Photography — Electronic flash equipment — Determination of light output and performance
ISO

ISO 7319:2021
En Vigor
2021-06-01
Aerospace — Fluid systems — Interface of 24° cone metric couplings
ISO

ISO/TR 24097-3:2019
En Vigor
2019-02-04
Intelligent transport systems — Using web services (machine-machine delivery) for ITS service delivery — Part 3: Quality of service
ISO

ISO 23402-1:2020
En Vigor
2020-09-23
Dentistry — Portable dental equipment for use in non‐permanent healthcare environment — Part 1: General requirements
ISO

ISO 17710:2023
En Vigor
2023-06-20
Plastics — Polyols for use in the production of polyurethanes — Determination of degree of unsaturation by microtitration
ISO

ISO 3093:2009
En Vigor
2009-11-30
Wheat, rye and their flours, durum wheat and durum wheat semolina — Determination of the falling number according to Hagberg-Perten
ISO

ISO 2080:2022
En Vigor
2022-03-08
Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary
ISO

ISO 12129-2:2019
En Vigor
2019-04-24
Plain bearings — Tolerances — Part 2: Tolerances on form and position and surface roughness for shafts and thrust collars
ISO

ISO 4861:2023
En Vigor
2023-05-26
Ships and marine technology — Piling barge winches
ISO

ISO 15500-2:2016
En Vigor
2016-04-21
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance and general test methods
ISO

ISO/IEC 24753:2011
En Vigor
2011-08-26
Information technology — Radio frequency identification (RFID) for item management — Application protocol: encoding and processing rules for sensors and batteries
ISO

ISO 3220:1975
En Vigor
1975-07-01
Copper and copper alloys — Determination of arsenic — Photometric method
ISO

ISO/IEC TR 23613:2020
En Vigor
2020-05-11
Information technology — Cloud computing — Cloud service metering elements and billing modes
ISO

ISO/TR 20811:2017
En Vigor
2017-07-27
Optics and photonics — Lasers and laser-related equipment — Laser-induced molecular contamination testing
ISO

ISO 14490-6:2014
En Vigor
2014-10-17
Optics and photonics — Test methods for telescopic systems — Part 6: Test methods for veiling glare index
ISO

ISO 13799:2020
En Vigor
2020-08-28
Ships and marine technology — Ship's mooring and towing fittings — Recessed bitts (casting type)
ISO

ISO/ASTM 52935:2023
En Vigor
2023-11-02
Additive manufacturing of metals — Qualification principles — Qualification of coordination personnel
ISO

ISO 3452-2:2021
En Vigor
2021-05-21
Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials
ISO

ISO 22942-1:2022
En Vigor
2022-03-24
Molecular biomarker analysis — Isothermal polymerase chain reaction (isoPCR) methods — Part 1: General requirements
ISO

ISO/FDIS 19085-22
En Vigor
2025-07-30
Woodworking machines — Safety — Part 22: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO

ISO/TS 20746:2016
En Vigor
2016-12-08
Dentistry — Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
ISO

ISO/TR 56004:2019
En Vigor
2019-02-04
Innovation Management Assessment — Guidance
ISO

ISO/TS 10303-1520:2018
En Vigor
2018-12-18
Industrial automation systems and integration — Product data representation and exchange — Part 1520: Application module: Product data quality definition
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO

ISO 23412:2020
En Vigor
2020-05-28
Indirect, temperature-controlled refrigerated delivery services — Land transport of parcels with intermediate transfer
ISO

ISO 9938:2022
En Vigor
2022-01-17
Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 °C/28 000 kPa — Procurement specification
ISO

ISO 15063:2011
En Vigor
2011-09-15
Plastics — Polyols for use in the production of polyurethanes — Determination of hydroxyl number by NIR spectroscopy
ISO

ISO 17491-1:2012
En Vigor
2012-03-19
Protective clothing — Test methods for clothing providing protection against chemicals — Part 1: Determination of resistance to outward leakage of gases (internal pressure test)
ISO

ISO 13563-2:2001
En Vigor
2001-03-15
Single side loading fork-lift trucks — Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above
ISO

ISO 16630:2017
En Vigor
2017-10-02
Metallic materials — Sheet and strip — Hole expanding test
ISO

ISO 7612:2018
En Vigor
2018-10-15
Diesel engines — Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems — Mounting dimensions
ISO

ISO 22085-2:2021
En Vigor
2021-07-27
Intelligent transport systems (ITS) — Nomadic device service platform for micro mobility — Part 2: Functional requirements and dataset definitions
ISO

ISO 4821:2022
En Vigor
2022-05-18
Plain bearings — Dynamic adhesion test method for DLC coated parts under lubricated condition
ISO

ISO/DIS 18983
En Vigor
2025-11-18
Guidelines for hybrid meeting service
ISO

ISO 11418-7:2016
En Vigor
2016-06-13
Containers and accessories for pharmaceutical preparations — Part 7: Screw-neck vials made of glass tubing for liquid dosage forms
ISO

ISO 3741:2010
En Vigor
2010-09-21
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms
ISO

ISO 19056-2:2019
En Vigor
2019-12-02
Microscopes — Definition and measurement of illumination properties — Part 2: Illumination properties related to the colour in bright field microscopy
ISO

ISO 14229-6:2013
En Vigor
2013-03-20
Road vehicles — Unified diagnostic services (UDS) — Part 6: Unified diagnostic services on K-Line implementation (UDSonK-Line)
ISO

ISO/TS 10839:2022
En Vigor
2022-07-22
Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation
ISO

ISO 8502-15:2020
En Vigor
2020-09-10
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 15: Extraction of soluble contaminants for analysis by acid extraction
ISO

ISO/TR 22514-9:2023
En Vigor
2023-11-28
Statistical methods in process management — Capability and performance — Part 9: Process capability statistics for characteristics defined by geometrical specifications
ISO

ISO 10326-2:2022
En Vigor
2022-03-29
Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 2: Application to railway vehicles
ISO

ISO 19649:2017
En Vigor
2017-03-17
Mobile robots — Vocabulary
ISO

ISO 15270-5:2025
En Vigor
2025-11-06
Plastics — Guidelines for the recovery and recycling of plastics waste — Part 5: Organic/biological recycling
ISO

ISO/IEC TS 19795-9:2019
En Vigor
2019-12-18
Information technology — Biometric performance testing and reporting — Part 9: Testing on mobile devices
ISO

ISO 2164:1975
En Vigor
1975-09-01
Pulses — Determination of glycosidic hydrocyanic acid
ISO

ISO/TS 10303-1788:2018
En Vigor
2018-12-18
Industrial automation systems and integration — Product data representation and exchange — Part 1788: Application module: Explicit constraints
Si desea adquirir esta norma, envíenos su solicitud a normas@aenor.com
ISO

ISO 9846:2025
En Vigor
2025-08-08
Solar energy — Calibration of a pyranometer using a pyrheliometer
ISO

ISO 22956:2021
En Vigor
2021-06-08
Healthcare organization management — Requirements for patient-centred staffing