Normas ISO
Filtrar:
ISO
ISO 8676:2022
En Vigor
2022-06-28
Fasteners — Hexagon head screws, with fine pitch thread — Product grades
A and B
ISO
ISO 18554:2016
En Vigor
2016-03-18
Surface chemical analysis — Electron spectroscopies — Procedures for
identifying, estimating and correcting for unintended degradation by
X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
ISO
ISO 15923-1:2013
En Vigor
2013-11-28
Water quality — Determination of selected parameters by discrete
analysis systems — Part 1: Ammonium, nitrate, nitrite, chloride,
orthophosphate, sulfate and silicate with photometric detection
ISO
ISO 8130-13:2019
En Vigor
2019-04-01
Coating powders — Part 13: Particle size analysis by laser diffraction
ISO
ISO/IEC 7816-3:2006
En Vigor
2006-10-30
Identification cards — Integrated circuit cards — Part 3: Cards with
contacts — Electrical interface and transmission protocols
ISO
ISO 15384:2018
En Vigor
2018-07-05
Protective clothing for firefighters — Laboratory test methods and
performance requirements for wildland firefighting clothing
ISO
ISO 18292:2011
En Vigor
2011-03-16
Energy performance of fenestration systems for residential buildings —
Calculation procedure
ISO
ISO/TR 24697:2011
En Vigor
2011-08-15
Textiles and textile products — Guidelines on the determination of the
precision of a standard test method by interlaboratory trials
ISO
ISO 6469-4:2015
En Vigor
2015-09-01
Electrically propelled road vehicles — Safety specifications — Part 4:
Post crash electrical safety
ISO
ISO
ISO 14490-9:2019
En Vigor
2019-09-18
Optics and photonics — Test methods for telescopic systems — Part 9:
Test methods for field curvature
ISO
ISO 7764:2006
En Vigor
2006-04-27
Iron ores — Preparation of predried test samples for chemical analysis
ISO
ISO 20468-2:2019
En Vigor
2019-07-11
Guidelines for performance evaluation of treatment technologies for
water reuse systems — Part 2: Methodology to evaluate performance of
treatment systems on the basis of greenhouse gas emissions
ISO
ISO 18443:2016
En Vigor
2016-11-03
Space data and information transfer systems — Space link extension —
Application program interface for return channel frames service
ISO
ISO 606:2015
En Vigor
2015-08-13
Short-pitch transmission precision roller and bush chains, attachments
and associated chain sprockets
ISO
ISO 8502-4:2017
En Vigor
2017-01-10
Preparation of steel substrates before application of paints and related
products — Tests for the assessment of surface cleanliness — Part 4:
Guidance on the estimation of the probability of condensation prior to
paint application
ISO
ISO 22489:2016
En Vigor
2016-10-20
Microbeam analysis — Electron probe microanalysis — Quantitative point
analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
ISO
ISO/TS 22933:2022
En Vigor
2022-04-01
Surface chemical analysis — Secondary ion mass spectrometry — Method for
the measurement of mass resolution in SIMS
ISO
ISO 13232-7:2005
En Vigor
2005-12-08
Motorcycles — Test and analysis procedures for research evaluation of
rider crash protective devices fitted to motorcycles — Part 7:
Standardized procedures for performing computer simulations of
motorcycle impact tests
ISO
ISO
ISO 4586-6:2018
En Vigor
2018-07-02
High-pressure decorative laminates (HPL, HPDL) — Sheets based on
thermosetting resins (usually called laminates) — Part 6: Classification
and specifications for exterior-grade compact laminates of thickness 2
mm and greater
ISO
ISO 20728:2018
En Vigor
2018-09-05
Corrosion of metal and alloys — Determination of resistance of magnesium
alloys to stress corrosion cracking
ISO
ISO 2559:2011
En Vigor
2011-11-23
Textile glass — Mats (made from chopped or continuous strands) —
Designation and basis for specifications
ISO
ISO 13272:2011
En Vigor
2011-10-06
Plastics piping systems for non-pressure underground drainage and
sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene
(PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE)
— Specifications for manholes and inspection chambers in traffic areas
and underground installations
ISO
ISO 2859-5:2005
En Vigor
2005-06-27
Sampling procedures for inspection by attributes — Part 5: System of
sequential sampling plans indexed by acceptance quality limit (AQL) for
lot-by-lot inspection
ISO
ISO 14624-7:2006
En Vigor
2006-04-19
Space systems — Safety and compatibility of materials — Part 7:
Determination of permeability and penetration of materials to aerospace fluids
ISO
ISO 18560-1:2014
En Vigor
2014-11-14
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test
method for air-purification performance of semiconducting photocatalytic
materials by test chamber method under indoor lighting environment —
Part 1: Removal of formaldehyde
ISO
ISO 13299:2016
En Vigor
2016-03-16
Sensory analysis — Methodology — General guidance for establishing a
sensory profile
ISO
ISO 14520-8:2019
En Vigor
2019-07-02
Gaseous fire-extinguishing systems — Physical properties and system
design — Part 8: HFC 125 extinguishant
ISO
ISO 15784-3:2008
En Vigor
2008-10-06
Intelligent transport systems (ITS) — Data exchange involving roadside
modules communication — Part 3: Application profile-data exchange (AP-DATEX)
ISO
ISO 6444:2005
En Vigor
2005-10-20
Door leaves — Determination of the behaviour under humidity variations
in successive uniform climates
ISO
ISO
ISO 1085:2016
En Vigor
2016-12-08
Assembly tools for screws and nuts — Double-ended wrenches — Size pairing
ISO
ISO/IEC 17592:2004
En Vigor
2004-07-08
Information technology — 120 mm (4,7 Gbytes per side) and 80 mm (1,46
Gbytes per side) DVD rewritable disk (DVD-RAM)
ISO
ISO/IEC 17760-102:2016
En Vigor
2016-03-07
Information technology — AT Attachment — Part 102: ATA/ATAPI Command set
- 2 (ACS-2)
ISO
ISO/IEC Guide 2:2004
En Vigor
2004-11-03
Standardization and related activities — General vocabulary
ISO
ISO 18329:2004
En Vigor
2004-10-20
Milk and milk products — Determination of furosine content — Ion-pair
reverse-phase high-performance liquid chromatography method
ISO
ISO/TR 22681:2019
En Vigor
2019-09-06
Hydraulic fluid power — Impact and use of ISO 11171:2016 µm(b) and µm(c)
particle size designations on particle count and filter test data
ISO
ISO/IEC 29361:2008
En Vigor
2008-06-30
Information technology — Web Services Interoperability — WS-I Basic
Profile Version 1.1
ISO
ISO 9187-1:2010
En Vigor
2010-09-30
Injection equipment for medical use — Part 1: Ampoules for injectables
