AENOR Logo

Normas IEC

25074 Resultados disponibles

Filtrar:

(13599)
(11475)
IEC

IEC 60371-3-7:1995/AMD1:2006

En Vigor
2006-09-27
Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
 
IEC

IEC 60364-5-55:2011/AMD1:2012

En Vigor
2012-10-12
Amendment 1 - Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment
 
IEC

IEC 60875-1:2024 RLV

En Vigor
2024-04-12
Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
 
IEC

IEC/ASTM 62885-7:2020/AMD1:2022

En Vigor
2022-06-23
Amendment 1 - Surface cleaning appliances - Part 7: Dry cleaning robots for household or similar use - Methods for measuring the performance
 
IEC

IEC 60141-4:1980/AMD1:1990

En Vigor
1990-10-15
Amendment 1 - Tests on oil-filled and gas-pressure cables and their accessories. Part 4: Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV
 
IEC

IEC 61196-1-127:2024

En Vigor
2024-03-06
Coaxial communication cables - Part 1-127: Electrical test methods - Link loss of radiating cable
 
IEC

IEC 61967-6:2002/COR1:2010

En Vigor
2010-08-30
Corrigendum 1 - Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 6: Measurement of conducted emissions - Magnetic probe method
 
IEC

IEC 60050-531:1974/AMD2:2020

En Vigor
2020-04-23
Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 531: Electronic tubes
 
IEC

IEC 61784-5-2:2018/AMD1:2024

En Vigor
2024-03-21
Amendment 1 - Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2
 
IEC

IEC 60050-872:2022

En Vigor
2022-09-07
International Electrotechnical Vocabulary (IEV) – Part 872: Accessibility
 
IEC

IEC 60094-2:1994/COR1:1995

En Vigor
1995-03-01
Corrigendum 1 - Magnetic tape sound recording and reproducing systems - Part 2: Calibration tapes
 
IEC

IEC 61097-12:1996/AMD2:2023

En Vigor
2023-11-20
Amendment 2 - Global maritime distress and safety system (GMDSS) - Part 12: Survival craft portable two-way VHF radiotelephone apparatus - Operational and performance requirements, methods of testing and required test results
 
IEC

IEC 61534-21:2014

En Vigor
2014-06-19
Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
 
IEC

IEC 60061-4:1990/AMD10:2006

En Vigor
2006-05-30
Amendment 10 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
 
IEC

IEC 62554:2011/AMD2:2025

En Vigor
2025-02-11
Amendment 2 - Sample preparation for measurement of mercury level in fluorescent lamps and low-pressure mercury UV radiation sources
 
IEC

IEC 62319-1:2005/COR1:2009

En Vigor
2009-03-24
Corrigendum 1 - Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification
 
IEC

IEC 62333-2:2006/AMD1:2015

En Vigor
2015-08-05
Amendment 1 - Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods
 
IEC

IEC 60512-21-1:2010

En Vigor
2010-06-10
Connectors for electronic equipment - Tests and measurements - Part 21-1: RF resistance tests - Test 21a: RF shunt resistance
 
IEC

IEC 60811-607:2012

En Vigor
2012-03-13
Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene
 
IEC

IEC 60512-16-11:2008

En Vigor
2008-05-14
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections
 
IEC

IEC 60695-2-12:2021 RLV

En Vigor
2021-10-08
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials
 
IEC

IEC 61196-1-101:2025

En Vigor
2025-05-19
Coaxial communication cables - Part 1-101: Electrical test methods - Test for conductor DC resistance of cable
 
IEC

IEC 62047-16:2015

En Vigor
2015-03-05
Semiconductor devices - Micro-electromechanical devices - Part 16: Test methods for determining residual stresses of MEMS films - Wafer curvature and cantilever beam deflection methods
 
IEC

IEC TR 63130:2018

En Vigor
2018-05-24
Dimming and hot restrike of metal halide lamps
 
IEC

IEC 61967-6:2002/AMD1:2008

En Vigor
2008-03-12
Amendment 1 - Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 6: Measurement of conducted emissions - Magnetic probe method
 
IEC

IEC 60999-2:2003

En Vigor
2003-05-09
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
 
IEC

IEC TS 61081:1991

En Vigor
1991-07-19
Pneumatic instruments driven by associated process gas - Safe installation and operating procedures - Guidelines
 
IEC

IEC 61987-32:2024

En Vigor
2024-06-07
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 32: Lists of properties (LOP) for I/O modules for electronic data exchange
 
IEC

IEC 60061-4C:1994

En Vigor
1994-11-01
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information
 
IEC

IEC 62319-1-1:2005

En Vigor
2005-02-15
Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application
 
IEC

IEC 60642-3:1992

En Vigor
1992-03-15
Piezoelectric ceramic resonators - Part 3: Standard outlines
 
IEC

IEC 60512-11-5:2002

En Vigor
2002-02-21
Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth
 
IEC

IEC 60512-9-2:2011

En Vigor
2011-11-28
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature
 
IEC

IEC 60169-13:1976/AMD1:1996

En Vigor
1996-03-07
Amendment 1 - Radio-frequency connectors - Part 13: R.F. coaxial connectors with inner diameter of outer conductor 5.6 mm (0.22 in) - Characteristic impedance 75 ohms (Type 1.6/5.6) - Characteristic impedance 50 ohms (Type 1.8/5.6) with similar mating dimensions
 
IEC

IEC 61300-3-25:2016

En Vigor
2016-08-30
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of non-angled ferrules and non-angled ferrules with fibre installed
 
IEC

IEC 62040-1:2017/COR1:2019

En Vigor
2019-10-10
Corrigendum 1 - Uninterruptible power systems (UPS) - Part 1: Safety requirements
 
IEC

IEC 63245-2:2022

En Vigor
2022-12-14
Spatial wireless power transfer based on multiple magnetic resonances - Part 2: Reference model
 
IEC

IEC 60512-16-21:2012

En Vigor
2012-05-07
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses
 
IEC

IEC 62328-1:2005

En Vigor
2005-07-25
Multimedia home server systems - Interchangeable volume/file structure adaptation for broadcasting receivers - Part 1: General description and architecture
 
IEC

IEC 61628-2:1998+AMD1:2007 CSV

En Vigor
2007-07-30
Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test
 
IEC

IEC 62153-4-13:2009

En Vigor
2009-08-06
Metallic communication cable test methods - Part 4-13: Electromagnetic compatibility (EMC) - Coupling attenuation of links and channels (laboratory conditions) - Absorbing clamp method
 
IEC

IEC 60811-401:2012+AMD1:2017 CSV

En Vigor
2017-07-21
Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
 
IEC

IEC TR 62396-7:2017

En Vigor
2017-07-12
Process management for avionics - Atmospheric radiation effects - Part 7: Management of single event effects (SEE) analysis process in avionics design
 
IEC

IEC 63180:2020/AMD1:2025

En Vigor
2025-05-23
Amendment 1 - Methods of measurement and declaration of the detection range of detectors - Passive infrared detectors for major and minor motion detection
 
IEC

IEC 61156-7-2:2003

En Vigor
2003-05-23
Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Capability Approval - Sectional specification for digital and analog communication cables
 
IEC

IEC 62026-2:2008/AMD1:2019

En Vigor
2019-07-10
Amendment 1 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)
 
IEC

IEC 60122-2-1:1991/AMD1:1993

En Vigor
1993-09-06
Amendment 1 - Quartz crystal units for frequency control and selection - Part 2: Guide to the use of quartz crystal units for frequency control and selection - Section One: Quartz crystal units for microprocessor clock supply
 
IEC

IEC 60268-17:1990

En Vigor
1990-10-30
Sound system equipment. Part 17: Standard volume indicators
 
IEC

IEC 62497-1:2010/AMD1:2013

En Vigor
2013-03-28
Amendment 1 - Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment
 
ISO

IEC 60948:1988

En Vigor
1988-06-15
Numeric keyboard for home electronic systems (HES)
 
IEC

IEC 61196-1-1:2007

En Vigor
2007-04-11
Coaxial communication cables - Part 1-1: Capability approval for coaxial cables
 
IEC

IEC 63044-5-2:2017

En Vigor
2017-01-27
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments
 
IEC

IEC TR 63231:2019

En Vigor
2019-08-22
Consideration of energy efficiency in wireless power transfer technology
 
IEC

IEC 60191-6-5:2001

En Vigor
2001-08-27
Mechanical standardization of semiconductor devices - Part 6-5: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitch ball grid array (FBGA)
 
IEC

IEC 60169-6:1971

En Vigor
1971-01-01
Radio-frequency connectors. Part 6: R.F. coaxial connectors for cables 96 IEC 75-17 and larger
 
IEC

IEC 61747-2:2015

En Vigor
2015-04-09
Liquid crystal display devices - Part 2: Liquid crystal display modules - Sectional specification
 
IEC

IEC 62805-2:2017

En Vigor
2017-08-17
Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance
 
IEC

IEC 61196-1-100:2022 RLV

En Vigor
2022-01-24
Coaxial communication cables - Part 1-100: Electrical test methods - General requirements
 
IEC

IEC TS 62045-1:2006

En Vigor
2006-12-13
Multimedia security - Guideline for privacy protection of equipment and systems in and out of use - Part 1: General
 
IEC

IEC 60384-24-1:2006

En Vigor
2006-06-26
Fixed capacitors for use in electronic equipment - Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ