AENOR Logo

Normas IEC

25074 Resultados disponibles

Filtrar:

(13599)
(11475)
IEC

IEC 60050-212:2010/AMD2:2015

En Vigor
2015-08-14
Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases
 
IEC

IEC 60384-16-1:2005

En Vigor
2005-11-09
Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment levels E and EZ
 
IEC

IEC 61834-10:2001/COR1:2001

En Vigor
2001-07-10
Corrigendum 1 - Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 10: DTV format
 
IEC

IEC 60235-2D:1976

En Vigor
1976-01-01
Supplement D - Measurement of the electrical properties of microwave tubes - Part 2: General measurements
 
IEC

IEC 60512-6-4:2002

En Vigor
2002-02-22
Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
 
IEC

IEC TS 62607-2-6:2024

En Vigor
2024-08-07
Nanomanufacturing - Key control characteristics - Part 2-6: Carbon nanotube-related products - Thermal diffusivity of vertically-aligned carbon nanotubes: flash method
 
IEC

IEC 61580-3:1997

En Vigor
1997-06-24
Methods of measurement for Waveguides - Part 3: Variation of group delay
 
IEC

IEC TR 62476:2010

En Vigor
2010-02-18
Guidance for evaluation of product with respect to substance-use restrictions in electrical and electronic products
 
IEC

IEC TS 62257-6:2015

En Vigor
2015-12-11
Recommendations for renewable energy and hybrid systems for rural electrification - Part 6: Acceptance, operation, maintenance and replacement
 
IEC

IEC 60915:2006/COR1:2007

En Vigor
2007-05-23
Corrigendum 1 - Fixed capacitors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
 
IEC

IEC 61196-6-4:2020

En Vigor
2020-05-27
Coaxial communication cables - Part 6-4: Detail specification for 75-7 type CATV drop cables
 
IEC

IEC 60335-2-74:2021

En Vigor
2021-09-03
Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters
 
IEC

IEC 61755-1:2022

En Vigor
2022-09-14
Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 1: Optical interfaces for dispersion unshifted fibres - General and guidance
 
IEC

IEC 60404-4:1995/AMD2:2008

En Vigor
2008-09-24
Amendment 2 - Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials
 
IEC

IEC 60079-1:2014/COR1:2018

En Vigor
2018-06-26
Corrigendum 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
 
IEC

IEC 62841-4-7:2022/COR1:2023

En Vigor
2023-05-05
Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators
 
IEC

IEC 60364-7-753:2014

En Vigor
2014-05-07
Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Heating cables and embedded heating systems
 
IEC

IEC 61347-2-7:2011/AMD2:2021

En Vigor
2021-12-13
Amendment 2 - Lamp controlgear - Part 2-7: Particular requirements for electric source for safety services (ESSS) supplied electronic controlgear for emergency lighting (self-contained)
 
IEC

IECQ OD 19443:2019

En Vigor
2019-07-11
IEC Quality Assessment System for Electronic Components (IECQ System) - Operational document - Application of ISO 19443 for issuing IECQ products and services ITNS approved process certification
 
IEC

IEC 62087-1:2015

En Vigor
2015-06-05
Audio, video, and related equipment - Determination of power consumption - Part 1: General
 
IEC

IEC 60061-2R:1996

En Vigor
1996-10-01
sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
 
IEC

IEC 60364-7-708:2017

En Vigor
2017-04-10
Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
 
IEC

IEC 60332-3-23:2018

En Vigor
2018-07-13
Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
 
IEC

IEC 60857:1986/AMD1:1991

En Vigor
1991-07-18
Amendment 1 - Pre-recorded optical reflective videodisk system 'Laser vision' 60Hz/525 lines - M/NTSC
 
IEC

IEC 60747-14-5:2010

En Vigor
2010-02-11
Semiconductor devices - Part 14-5: Semiconductor sensors - PN-junction semiconductor temperature sensor
 
IEC

IEC 61628-2:1998

En Vigor
1998-11-06
Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test
 
IEC

IEC TS 63499:2024

En Vigor
2024-02-28
Encoding guidelines for interoperable master format - Application #6
 
IEC

IEC 60191-2Z:2000

En Vigor
2000-09-29
Twenty-fourth supplement - Mechanical standardization of semiconductor devices - Part 2: Dimensions
 
IEC

IEC TS 60076-20:2017/COR1:2018

En Vigor
2018-01-12
Corrigendum 1 - Power transformers - Part 20: Energy efficiency
 
IEC

IEC 60810:2017/AMD2:2022

En Vigor
2022-04-28
Amendment 2 - Lamps, light sources and LED packages for road vehicles - Performance requirements
 
IEC

IEC 62873-1:2017+AMD1:2020 CSV

En Vigor
2020-11-11
Residual current operated circuit-breakers for household and similar use - Part 1: Outline of blocks and modules for residual current device standards
 
IEC

IEC 62321-7-1:2015

En Vigor
2015-09-16
Determination of certain substances in electrotechnical products - Part 7-1: Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method
 
IEC

IEC 61029-2-3:1993/AMD1:2001

En Vigor
2001-11-27
Amendment 1 - Safety of transportable motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers
 
IEC

IEC TS 60695-2-20:2024

En Vigor
2024-11-15
Fire hazard testing - Part 2-20: Glowing/hot-wire based test methods - Hot-wire ignition test (HWI) method - Apparatus, verification, test method and guidance
 
IEC

IEC 60050-715:1996/AMD2:2019

En Vigor
2019-10-17
Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 715: Telecommunication networks, teletraffic and operation
 
IEC

IEC 60050-466:1990/AMD2:2021

En Vigor
2021-03-29
Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 466: Overhead lines
 
IEC

IEC 60183:2015

En Vigor
2015-01-14
Guidance for the selection of high-voltage A.C. cable systems
 
IEC

IEC 62868-2-1:2020

En Vigor
2020-08-12
Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-1: Particular requirements - Semi-integrated OLED modules
 
IEC

IEC 60601-1-6:2010/AMD2:2020

En Vigor
2020-07-22
Amendment 2 - Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability
 
IEC

IEC 61982-4:2015

En Vigor
2015-10-28
Secondary batteries (except lithium) for the propulsion of electric road vehicles - Part 4: Safety requirements of nickel-metal hydride cells and modules
 
IEC

IEC 60745-2-12:2003

En Vigor
2003-02-12
Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators
 
IEC

IEC 60151-5:1964

En Vigor
1964-01-01
Measurements of the electrical properties of electronic tubes and valves - Part 5: Methods of measuring hiss and hum
 
IEC

IEC 60534-9:2007/COR1:2008

En Vigor
2008-06-11
Corrigendum 1 - Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs
 
IEC

IEC 60745-2-20:2003

En Vigor
2003-02-07
Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws
 
IEC

IEC 60050-102:2007/AMD1:2017

En Vigor
2017-08-31
Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 102: Mathematics - General concepts and linear algebra
 
IEC

IEC 61427-1:2013

En Vigor
2013-04-23
Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 1: Photovoltaic off-grid application
 
IEC

IEC 60335-2-70:2002

En Vigor
2002-03-20
Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines
 
IEC

IEC 60404-1-1:2004

En Vigor
2004-04-20
Magnetic materials - Part 1-1: Classification - Surface insulations of electrical steel sheet, strip and laminations
 
IEC

IEC 60335-2-47:2021/AMD1:2025

En Vigor
2025-02-10
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
 
IEC

IEC 60050-715:1996/AMD3:2021

En Vigor
2021-09-03
Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 715: Telecommunication networks, teletraffic and operation
 
IEC

IEC TR 63020:2016

En Vigor
2016-05-12
Digital sheet music - Market, use cases, and related technologies
 
IEC

IEC 60191-4:2013/AMD1:2018

En Vigor
2018-03-27
Amendment 1 - Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages
 
IEC

IEC 60851-1:2021+AMD1:2025 CSV

En Vigor
2025-01-06
Winding wires - Test methods - Part 1: General
 
IEC

IEC 62739-1:2013

En Vigor
2013-06-18
Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 1: Erosion test method for metal materials without surface processing
 
IEC

IEC 60584-3:2021

En Vigor
2021-02-16
Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system
 
IEC

IEC 61587-3:2013

En Vigor
2013-02-06
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks
 
IEC

IEC 63044-5-2:2017+AMD1:2022 CSV

En Vigor
2022-06-16
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments
 
IEC

IEC 60332-3-22:2018

En Vigor
2018-07-13
Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
 
IEC

IEC 60050-715:1996/AMD1:2016

En Vigor
2016-12-16
Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 715: Telecommunication networks, teletraffic and operation
 
IEC

IEC 61189-3-719:2016

En Vigor
2016-01-05
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change during temperature cycling