Estamos mejorando nuestra Tienda, Portal de clientes y Aenormas para ofrecerte una mejor experiencia.
Si detectas cualquier incidencia o necesitas ayuda durante el proceso de compra, puedes contactarnos a través del chat o escribirnos a normas@aenor.com.
Nuestro equipo estará encantado de ayudarte.
Normas IEC
Filtrar:
IEC
IEC 60169-13:1976
En Vigor
1976-01-01
Radio-frequency connectors - Part 13: R.F. coaxial connectors with inner
diameter of outer conductor 5.6 mm (0.22 in) - Characteristic impedance
75 ohms (Type 1.6/5.6) - Characteristic impedance 50 ohms (Type 1.8/5.6)
with similar mating dimensions
IEC
IEC 62873-3-2:2020
En Vigor
2020-11-20
Residual current operated circuit-breakers for household and similar use
- Part 3-2: Particular requirements for devices with flat quick-connect terminations
IEC
IEC 62282-6-200:2016
En Vigor
2016-09-22
Fuel cell technologies - Part 6-200: Micro fuel cell power systems -
Performance test methods
IEC
IEC 60601-2-76:2018+AMD1:2023 CSV
En Vigor
2023-08-31
Medical electrical equipment - Part 2-76: Particular requirements for
the basic safety and essential performance of low energy ionized gas
haemostasis equipment
IEC
IEC 61280-2-2:2012/COR1:2015
En Vigor
2015-02-17
Corrigendum 1 - Fibre optic communication subsystem test procedures -
Part 2-2: Digital systems - Optical eye pattern, waveform and extinction
ratio measurement
IEC
IEC
IEC 60702-2:2002/AMD1:2015
En Vigor
2015-01-15
Amendment 1 - Mineral insulated cables and their terminations with a
rated voltage not exceeding 750 V - Part 2: Terminations
IEC
IEC 61237-3:1995/COR1:1995
En Vigor
1995-04-01
Corrigendum 1 - Broadcast video tape recorders - Methods of measurement
- Part 3: Electrical measurements for analogue component video signals
IEC
IEC 63174:2021
En Vigor
2021-11-29
Electrically operated toothbrushes - Methods for measuring the performance
IEC
IEC 60254-2:2008
En Vigor
2008-02-22
Lead-acid traction batteries - Part 2: Dimensions of cells and terminals
and marking of polarity on cells
IEC
IEC 60933-5:1992
En Vigor
1992-11-30
Audio, video and audiovisual systems - Interconnections and matching
values - Part 5: Y/C connector for video systems - Electrical matching
values and description of the connector
IEC
IEC 61097-7:2025
En Vigor
2025-06-11
Global maritime distress and safety system (GMDSS) - Part 7: Shipborne
VHF radiotelephone transmitter and receiver - Operational and
performance requirements, test methods and required test results
IEC
IEC 61000-4-17:1999/AMD2:2008
En Vigor
2008-11-27
Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-17: Testing
and measurement techniques - Ripple on d.c. input power port immunity test
IEC
IEC 60034-14:2018 RLV
En Vigor
2018-08-17
Rotating electrical machines - Part 14: Mechanical vibration of certain
machines with shaft heights 56 mm and higher - Measurement, evaluation
and limits of vibration severity
IEC
IEC 61215-1-3:2021
En Vigor
2021-02-23
Terrestrial photovoltaic (PV) modules - Design qualification and type
approval - Part 1-3: Special requirements for testing of thin-film
amorphous silicon based photovoltaic (PV) modules
IEC
IEC 61029-2-8:1995/AMD1:1999
En Vigor
1999-02-19
Amendment 1 - Safety of transportable motor-operated electric tools -
Part 2-8: Particular requirements for single spindle vertical moulders
IEC
IEC 61937-5:2006/AMD1:2019
En Vigor
2019-01-24
Amendment 1 - Digital audio - Interface for non-linear PCM encoded audio
bitstreams applying IEC 60958 - Part 5: Non-linear PCM bitstreams
according to the DTS (Digital Theater Systems) format(s)
IEC
IEC TR 61508-3-3:2025
En Vigor
2025-07-16
Functional safety of electrical/electronic/programmable electronic
safety-related systems - Part 3-3: Object-oriented software in
safety-related systems
IEC
IEC 62271-214:2024 EXV-CMV
En Vigor
2024-04-15
High-voltage switchgear and controlgear - Part 214: Internal arc
classification for AC metal-enclosed pole-mounted switchgear and
controlgear for rated voltages above 1 kV and up to and including 52 kV
IEC
IEC 61753-022-2:2012
En Vigor
2012-11-15
Fibre optic interconnecting devices and passive components - Performance
standard - Part 022-2: Fibre optic connectors terminated on multimode
fibre for category C - Controlled environment
IEC
IEC 63128:2019
En Vigor
2019-05-20
Lighting control interface for dimming - Analogue voltage dimming
interface for electronic current sourcing controlgear
IEC
IEC 62011-1:2002
En Vigor
2002-05-23
Insulating materials - Industrial, rigid, moulded, laminated tubes and
rods of rectangular and hexagonal cross-section based on thermosetting
resins for electrical purposes - Part 1: Definitions, designations and
general requirements
IEC
IEC 60061-3:1969/AMD28:2002
En Vigor
2002-05-13
Amendment 28 - Lamp caps and holders together with gauges for the
control of interchangeability and safety. Part 3: Gauges
IEC
IEC 62841-3-3:2024
En Vigor
2024-06-21
Electric motor-operated hand-held tools, transportable tools and lawn
and garden machinery - Safety - Part 3-3: Particular requirements for
transportable planers and thicknessers
IEC
IEC 62343-3-1:2016
En Vigor
2016-04-21
Dynamic modules - Part 3-1: Performance specification templates -
Dynamic channel equalizers
IEC
IEC 61029-2-4:1993
En Vigor
1993-03-31
Safety of transportable motor-operated electric tools - Part 2:
Particular requirements for bench grinders
IEC
IEC 62530-2:2023
En Vigor
2023-10-11
SystemVerilog - Part 2: Universal Verification Methodology Language
Reference Manual
IEC
IEC 60151-23:1970
En Vigor
1970-01-01
Measurements of the electrical properties of electronic tubes and
valves. Part 23: Methods of measurement of vacuum pulse modulator tubes
and valves
IEC
IEC 63182-4:2021
En Vigor
2021-11-29
Magnetic powder cores - Guidelines on dimensions and the limits of
surface irregularities - Part 4: Block-cores
IEC
IEC 60269-2:2013+AMD1:2016 CSV
En Vigor
2016-08-05
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use
by authorized persons (fuses mainly for industrial application) -
Examples of standardized systems of fuses A to K
IEC
IEC 61300-2-4:2019 RLV
En Vigor
2019-01-16
Fibre optic interconnecting devices and passive components - Basic test
and measurement procedures - Part 2-4: Tests - Fibre or cable retention
IEC
IEC 60512-20-1:2010
En Vigor
2010-06-10
Connectors for electronic equipment - Tests and measurements - Part
20-1: Fire hazard tests - Test 20a: Flammability, needle-flame
IEC
IEC 60601-2-35:2020/AMD1:2023
En Vigor
2023-12-21
Amendment 1 - Medical electrical equipment - Part 2-35: Particular
requirements for the basic safety and essential performance of heating
devices using blankets, pads or mattresses and intended for heating in
medical use
IEC
IEC 60317-21:2013
En Vigor
2013-10-10
Specifications for particular types of winding wires - Part 21:
Solderable polyurethane enamelled round copper wire overcoated with
polyamide, class 155
IEC
IEC 60512-1-4:1997/COR1:2000
En Vigor
2000-11-15
Corrigendum 1 - Electromechanical components for electronic equipment -
Basic testing procedures and measuring methods - Part 1: General -
Section 4: Test 1d: Contact protection effectiveness (scoop-proof)
IEC
IEC 61988-4-1:2015
En Vigor
2015-03-25
Plasma display panels - Part 4-1: Environmental testing methods -
Climatic and mechanical
IEC
IEC 61143-1:1992/AMD1:1997
En Vigor
1997-10-09
Amendment 1 - Electrical measuring instruments - X-t recorders - Part 1:
Definitions and requirements
IEC
IEC 60335-2-51:2023 CMV
En Vigor
2023-12-14
Household and similar electrical appliances - Safety - Part 2-51:
Particular requirements for stationary circulation pumps for heating and
service water installations
IEC
IEC TS 61094-7:2006
En Vigor
2006-05-22
Measurement microphones - Part 7: Values for the difference between
free-field and pressure sensitivity levels of laboratory standard microphones
IEC
IEC TR 63447-1:2023
En Vigor
2023-12-06
Form factor of smart mobile devices - Part 1: Impact on multimedia services
