AENOR Logo

Normas DIN

144175 Resultados disponibles

Filtrar:

(109277)
(34898)
DIN

DIN 16568-3:2002-11

En Vigor
2002-11-01
EDIFACT - Standardized message type - Part 3: Syntax and service report message (CONTRL) for implementation based on versions 1, 2 and 3 of the EDIFACT syntax
 
DIN

DIN 25435-2:2021-05

En Vigor
2021-05-01
In-service inspections for primary coolant circuit components of light water reactors - Part 2: Magnetic particle and penetrant testing
 
DIN

DIN 124:2011-03

En Vigor
2011-03-01
Steel round head rivets - Nominal diameters from 10 mm to 36 mm
 
DIN

DIN 21181-1:2010-03

En Vigor
2010-03-01
Shaft sinking - Debris kibbles - Part 1: Debris kibbles with suspension hanger
 
DIN

DIN 7489:2021-02

En Vigor
2021-02-01
Wood bits - Plug cutter
 
DIN

DIN 20379-1:2011-05

En Vigor
2011-05-01
Rock drilling - Part 1: Tapered bits for percussive flush drilling
 
DIN

DIN 18871-1:2018-11

En Vigor
2018-11-01
Equipment for commercial kitchens - Thermal equipment - Part 1: Warming cupboards; requirements and testing
 
DIN

DIN 13199:2021-06

En Vigor
2021-06-01
Medical instruments - Ethmoid rongeur forceps type Weil-Blakesley and Watson-Williams
 
DIN

DIN 18234-3:2018-05

En Vigor
2018-05-01
Fire safety of large roofs for buildings - Fire exposure from below - Part 3: Roof penetrations and roof edges - Requirements and testing / Note: To be replaced by DIN 18234-3 (2022-12).
 
DIN

DIN 19683-13:2007-07

En Vigor
2007-07-01
Soil quality - Physical laboratory tests - Part 13: Determination of soil volume percentage, total pore volume and pore number of mineral soils
 
DIN

DIN 18040-3:2014-12

En Vigor
2014-12-01
Construction of accessible buildings - Design principles - Part 3: Public circulation areas and open spaces / Note: To be replaced by DIN 18040-3 (2023-01), DIN EN 17210 (2019-06, t).
 
DIN

DIN 83418:2018-02

En Vigor
2018-02-01
Guide pulley for rope hatches
 
DIN

DIN 58932-3:2024-02

En Vigor
2024-02-01
Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrocytes; Text in German and English
 
DIN

DIN 54015:2017-12

En Vigor
2017-12-01
Testing of colour fastness of textiles - Determination of colour fastness of dyeings and prints to washing in presence of peroxide
 
DIN

DIN 25425-4 Beiblatt 2:2023-12

En Vigor
2023-12-01
Radionuclide Laboratories - Part 4: Rules for the protection of persons; Supplement 2: Guidance notes on shielding of gamma- and beta-radiation
 
DIN

DIN 51796:2010-08

En Vigor
2010-08-01
Testing of liquid mineral hydrocarbons - Determination of mercaptan sulfur content - Potentiometric method
 
DIN

DIN 43772 Beiblatt 2:2024-08

En Vigor
2024-08-01
Control technology - Protective tubes and extension tubes for liquid-in-glass thermometers, indicating mechanical thermometers, thermocouples and resistance thermometers; Supplement 2: Calculation of protective tubes
 
DIN

DIN 14464:2012-09

En Vigor
2012-09-01
Assembly with direct connection for sprinkler systems and extinguishing systems with open nozzles - Requirements and testing / Note: Applies in conjunction with DIN 1988-600 (2010-12).
 
DIN

DIN 34801:2021-08

En Vigor
2021-08-01
Bolts and screws with external hexalobular driving feature with large flange
 
DIN

DIN 25435-6:2021-05

En Vigor
2021-05-01
In-service inspections for primary coolant circuit components of light water reactors - Part 6: Eddy current testing of steam generator heating tubes
 
DIN

DIN 19584-2:2012-10

En Vigor
2012-10-01
Manhole tops, class D 400 - Part 2: Particulars / Note: Applies in conjunction with DIN 1229 (1996-06), DIN EN 124 (1994-08).
 
DIN

DIN 55985-1:2020-11

En Vigor
2020-11-01
Pigments - Comparison of the colour of pigments in mass-tone systems - Part 1: Coloured pigments
 
DIN

DIN 86004-1:2016-08

En Vigor
2016-08-01
Ships and marine technology - Low-corrosion design, measures and operation of pipework - Part 1: CuNiFe piping systems
 
DIN

DIN 33872-6:2010-12

En Vigor
2010-12-01
Information technology - Office machines - Method of specifying colour reproduction with YES/NO criteria - Part 6: Test charts for output properties - Testing of the equivalent spacing and of the regular chromatic spacing, only on CD-ROM
 
DIN

DIN 2430-3:2009-02

En Vigor
2009-02-01
Piping for pigging systems - Part 3: Testing prior to commissioning
 
DIN

DIN 45673-7:2010-08

En Vigor
2010-08-01
Mechanical vibration - Resilient elements used in railway tracks - Part 7: Laboratory test procedures for resilient elements of floating slab track systems
 
DIN

DIN 14800-18 Beiblatt 5:2019-03

En Vigor
2019-03-01
Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 18: Additional equipment loading sets for fire fighting vehicles; Supplement 5: Equipment loading set E, portable pump PFPN 10-1000 / Note: Applies in conjunction with DIN 14800-18 (2011-11).
 
DIN

DIN 65308:2011-03

En Vigor
2011-03-01
Aerospace - Inserts for composite materials, with MJ thread, open type, screw-locking, corrosion-resisting steel; Text in German and English
 
DIN

DIN 16842:2023-10

En Vigor
2023-10-01
Polyethylene (PE) pipes - PE-HD for pressureless applications - General quality requirements, dimensions and testing; Text in German and English
 
DIN

DIN 10800:2016-07

En Vigor
2016-07-01
Analysis of tea - Determination of loss in mass of unground tea at 103 °C
 
DIN

DIN 51830-2:2025-02

En Vigor
2025-02-01
Testing of lubricants - Determination of oxidation resistance of greases - Part 2: Determination of temperature dependent oxidation induction time for calculation of the Arrhenius activation energy of thermo-oxidative degradation
 
DIN

DIN 6366:2007-01

En Vigor
2007-01-01
Clutch drive rings for shell end mill arbors
 
DIN

DIN 51910:2020-12

En Vigor
2020-12-01
Testing of carbonaceous materials - Determination of compressive strength - Solid materials
 
DIN

DIN 6912:2021-03

En Vigor
2021-03-01
Hexagon socket head cap screws with reduced loadability - Low head, with centre
 
DIN

DIN 6316:2009-04

En Vigor
2009-04-01
Goose neck clamp / Note: To be replaced by DIN 6316 (2012-05).
 
DIN

DIN 3842:2017-10

En Vigor
2017-10-01
Valves for heating installations - Radiator fittings PN 10 - Dimensions, materials, design
 
DIN

DIN 6063-2:2011-04

En Vigor
2011-04-01
Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
 
DIN

DIN 649:2010-12

En Vigor
2010-12-01
T-slots for T-head bolts
 
DIN

DIN 2695:2021-06

En Vigor
2021-06-01
Diaphragm-weld packings and weld ring seals for flange connections
 
DIN

DIN 11868-2:2016-03

En Vigor
2016-03-01
Sampling equipments on milk collecting tankers - Part 2: Type verification
 
DIN

DIN 86056:2021-02

En Vigor
2021-02-01
Conduit pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys
 
DIN

DIN 56950-5:2024-04

En Vigor
2024-04-01
Entertainment technology - Machinery installations - Part 5: Safety requirements for electric chainhoist systems / Note: DIN 56950-5 (2018-07) remains valid alongside this standard until 2024-09-30.*Applies in conjunction with DIN EN 17206 (2022-02).
 
DIN

DIN 4000-191:2021-06

En Vigor
2021-06-01
Tabular layouts of properties - Part 191: Clamping elements
 
DIN

DIN 72552-2:2014-07

En Vigor
2014-07-01
Terminal markings for vehicles - Part 2: Codes
 
DIN

DIN 19698-6:2019-01

En Vigor
2019-01-01
Characterization of solids - Sampling of solid and semi-solid materials - Part 6: In situ sampling, with CD-ROM / Note: CD-ROM
 
DIN

DIN 375:2007-12

En Vigor
2007-12-01
Counterbores with Morse taper shank and detachable pilot
 
DIN

DIN 85005-10:2012-10

En Vigor
2012-10-01
Ships and marine technology - Graphical symbols for technical documentation - Part 10: Sensors and operating indicators; Text in German and English
 
DIN

DIN 33946:2010-09

En Vigor
2010-09-01
Bells for bicycles and mopeds - Requirements and testing
 
DIN

DIN 86026-2:2010-04

En Vigor
2010-04-01
Pipe clamps for shipboard use - Part 2: Inserts for pipe clamps
 
DIN

DIN 10293:2024-05

En Vigor
2024-05-01
Hydrometer for density measurement of buttermilk serum
 
DIN

DIN 4000-137:2011-09

En Vigor
2011-09-01
Tabular layouts of properties - Part 137: Tools with geometrically undefined cutting edges for machining of gears
 
DIN

DIN 83227:2002-08

En Vigor
2002-08-01
Stairs on seagoing ships - Steps
 
DIN

DIN 50916-1:2023-07

En Vigor
2023-07-01
Testing of copper alloys - Stress corrosion cracking test in ammonia - Part 1: Testing of tubes, rods and profiles
 
DIN

DIN 96298-1:2016-10

En Vigor
2016-10-01
Medical instruments - Terms, measuring methods and tests - Part 1: Terms and definitions
 
DIN

DIN 21625:2010-07

En Vigor
2010-07-01
Fans with electric motor drive intended for use in potentially explosive atmospheres in coal mines
 
DIN

DIN 18122-2:2020-11

En Vigor
2020-11-01
Soil, investigation and testing - Consistency limits - Part 2: Determination of shrinkage limit
 
DIN

DIN 21916-1:2007-02

En Vigor
2007-02-01
Mine plans - Operational safety - Part 1: Ventilation system and meteorology
 
DIN

DIN 18879-1:2007-12

En Vigor
2007-12-01
Equipment for commercial kitchens - Systems for treatment of potable water for commercial kitchens - Part 1: Decarbonisation-systems installed before equipment for commercial kitchens
 
DIN

DIN 28189:2014-11

En Vigor
2014-11-01
Modular heat exchangers
 
DIN

DIN 250:2002-04

En Vigor
2002-04-01
Radii