AENOR Logo

Normas DIN

144175 Resultados disponibles

Filtrar:

(109277)
(34898)
DIN

DIN EN 61188-5-6:2003-10
En Vigor
2003-10-01
Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations; Chip carriers with J-leads on four sides (IEC 61188-5-6:2003); German version EN 61188-5-6:2003
 
DIN

DIN EN 300019-2-0:2023-02
En Vigor
2023-02-01
Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2: Specification of environmental tests - Sub-part 0: Introduction (Endorsement of the English version EN 300 019-2-0 V2.2.1 (2022-08) as a German standard) / Note: DIN ETS standards collection*Endorsement notice
 
DIN

DIN ISO 16084:2021-06
En Vigor
2021-06-01
Balancing of rotating tools and tool systems (ISO 16084:2017)
 
DIN

DIN EN 13385:2002-06
En Vigor
2002-06-01
Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at the time of filling; German version EN 13385:2002 / Note: To be replaced by DIN EN 13385 (2025-01).
 
DIN

DIN EN 16602-70-55:2015-12
En Vigor
2015-12-01
Space product assurance - Microbiological examination of flight hardware and cleanrooms; English version EN 16602-70-55:2015
 
DIN

DIN EN 61753-052-6:2017-07
En Vigor
2017-07-01
Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre non-connectorized fixed attenuator - Category O in outside plant environment (IEC 61753-052-6:2016); German version EN 61753-052-6:2016
 
DIN

DIN EN 16798-9:2017-11
En Vigor
2017-11-01
Energy performance of buildings - Ventilation for buildings - Part 9: Calculation methods for energy requirements of cooling systems (Modules M4-1, M4-4, M4-9) - General; German version EN 16798-9:2017
 
DIN

DIN EN 15004-8:2018-03
En Vigor
2018-03-01
Fixed firefighting systems - Gas extinguishing systems - Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2015, modified); German version EN 15004-8:2017
 
DIN

DIN EN 17186:2019-10
En Vigor
2019-10-01
Identification of vehicles and infrastructures compatibility - Graphical expression for consumer information on EV power supply; German version EN 17186:2019
 
DIN

DIN EN 1977:2013-04
En Vigor
2013-04-01
Copper and copper alloys - Copper drawing stock (wire rod); German version EN 1977:2013
 
DIN

DIN ISO 18400-100:2020-11
En Vigor
2020-11-01
Soil quality - Sampling - Part 100: Guidance on the selection of sampling standards (ISO 18400-100:2017)
 
DIN

DIN EN 13739-1:2012-05
En Vigor
2012-05-01
Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 1: Requirements; German version EN 13739-1:2011
 
DIN

DIN EN 16910-1:2018-06
En Vigor
2018-06-01
Railway applications - Rolling stock - Requirements for non-destructive testing on running gear in railway maintenance - Part 1: Wheelsets; German version EN 16910-1:2018
 
DIN

DIN EN 62488-2:2019-06
En Vigor
2019-06-01
Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC (IEC 62488-2:2017); English version EN 62488-2:2017
 
DIN

DIN EN 4839-001:2019-01
En Vigor
2019-01-01
Aerospace series - Arc fault circuit breakers, three-poles, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz constant frequency - Part 001: Technical specification; German and English version EN 4839-001:2018
 
DIN

DIN EN 13224:2012-01
En Vigor
2012-01-01
Precast concrete products - Ribbed floor elements; German version EN 13224:2011 / Note: DIN EN 13224 (2007-08) remains valid alongside this standard until 2013-07-30.*To be replaced by DIN EN 13224-1 (2020-09), DIN EN 13224-2 (2020-09), DIN EN 17808 (2022-06, t).
 
DIN

DIN EN 1621-3:2019-03
En Vigor
2019-03-01
Motorcyclists' protective clothing against mechanical impact - Part 3: Motorcyclists' chest protectors - Requirements and test methods; German version EN 1621-3:2018
 
DIN

DIN ISO 8217:2018-10
En Vigor
2018-10-01
Petroleum products - Fuels (class F) - Specifications of marine fuels (ISO 8217:2017)
 
DIN

DIN EN 60666:2011-03
En Vigor
2011-03-01
Detection and determination of specified additives in mineral insulating oils (IEC 60666:2010); German version EN 60666:2010
 
DIN

DIN EN ISO 1737:2009-03
En Vigor
2009-03-01
Evaporated milk and sweetened condensed milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1737:2008); German version EN ISO 1737:2008
 
DIN

DIN ISO 693:1985-10
En Vigor
1985-10-01
Dimensions of seam welding wheel blanks; identical with ISO 693, edition 1982
 
DIN

DIN EN 61754-32:2017-07
En Vigor
2017-07-01
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32: Type DiaLink connector family (IEC 61754-32:2016); German version EN 61754-32:2016
 
DIN

DIN EN ISO 11608-5:2023-05
En Vigor
2023-05-01
Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2022); German version EN ISO 11608-5:2023
 
DIN

DIN EN 4612-011:2020-03
En Vigor
2020-03-01
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 011: Nickel plated copper - Operating temperatures, between -65 °C and 150 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard; German and English version EN 4612-011:2019
 
DIN

DIN EN 61755-2-4:2015-09
En Vigor
2015-09-01
Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-4: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connection applications (IEC 61755-2-4:2015); German version EN 61755-2-4:2015
 
DIN

DIN EN 13331-2:2002-11
En Vigor
2002-11-01
Trench lining systems - Part 2: Assessment by calculation or test; German version EN 13331-2:2002
 
DIN

DIN EN 60704-2-6:2013-04
En Vigor
2013-04-01
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers (IEC 60704-2-6:2012); German version EN 60704-2-6:2012 / Note: DIN EN 60704-2-6 (2004-09) remains valid alongside this standard until 2015-05-01.*Applies in conjunction with DIN EN 60704-1 (2010-12).
 
DIN

DIN EN 4612-013:2012-03
En Vigor
2012-03-01
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 013: SX, TC and UC - Nickel plated copper - Operating temperatures between -65 °C and 150 °C - Single extruded wall for equipment only, with jacket and screen (spiral) - UV laser printable - Product standard; German and English version EN 4612-013:2011
 
DIN

DIN EN 9300-210:2024-07
En Vigor
2024-07-01
Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 210: Product management data in an "as designed" view; English version prEN 9300-210:2024 / Note: Date of issue 2024-05-31
 
DIN

DIN EN 14813-2:2011-01
En Vigor
2011-01-01
Railway applications - Air conditioning for driving cabs - Part 2: Type tests; German version EN 14813-2:2006+A1:2010
 
DIN

DIN EN ISO 15983:2003-04
En Vigor
2003-04-01
Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002); German version EN ISO 15983:2002
 
DIN

DIN EN ISO 5269-2:2005-03
En Vigor
2005-03-01
Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Köthen method (ISO 5269-2:2004); German version EN ISO 5269-2:2004
 
DIN

DIN EN 300093-4:2002-12
En Vigor
2002-12-01
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) protocol; Calling Line Identification Restriction (CLIR) supplementary service - Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user (Endorsement of the English version EN 300093-4 V 1.3.1 (2002-04) as German Standard) / Note: DIN ETS standards collection*Endorsement notice
 
DIN

DIN EN 9276:2024-06
En Vigor
2024-06-01
Aerospace series - Programme management - Recommendations for the implementation of the integrated logistic support; English version prEN 9276:2024 / Note: Date of issue 2024-05-03
 
DIN

DIN EN 12911:2013-07
En Vigor
2013-07-01
Products used for treatment of water intended for human consumption - Manganese greensand; German version EN 12911:2013
 
DIN

DIN EN ISO 9100-1:2005-04
En Vigor
2005-04-01
Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005); German version EN ISO 9100-1:2005
 
DIN

DIN EN 2879:2017-03
En Vigor
2017-03-01
Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C; German and English version EN 2879:2017
 
DIN

DIN EN 300433:2016-09
En Vigor
2016-09-01
Citizens' Band (CB) radio equipment - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU (Endorsement of the English version EN 300 433 V2.1.1 (2016-05) as German standard) / Note: DIN ETS standards collection*Endorsement notice
 
DIN

DIN EN 13057:2002-09
En Vigor
2002-09-01
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption; German version EN 13057:2002
 
DIN

DIN EN 13894-2:2003-01
En Vigor
2003-01-01
Products and systems for the protection and repair of concrete structures - Test methods; Determination of fatigue under dynamic loading - Part 2: After hardening; German version EN 13894-2:2002
 
DIN

DIN EN 1148:1998-12
En Vigor
1998-12-01
Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data; German version EN 1148:1998 / Note: To be amended by DIN EN 1148/A1 (2005-02).
 
DIN

DIN EN 3155-017:2020-04
En Vigor
2020-04-01
Aerospace series - Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard; German and English version EN 3155-017:2020 / Note: Applies in conjunction with DIN EN 3155-001 (2016-11).*To be replaced by DIN EN 3155-017 (2024-02).
 
DIN

DIN EN 12868:2017-04
En Vigor
2017-04-01
Child use and care articles - Method for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers; German version EN 12868:2017
 
DIN

DIN EN 302094-6:2002-12
En Vigor
2002-12-01
Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No. one (DSS1) and Signalling System No. 7 (SS7) protocols; Call Forwarding on Not Reachable (CFNRc) supplementary service for Cordless Terminal Mobility (CTM) phase 1 - Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network (Endorsement of the English version EN 302094-6 V 1.1.1 (2002-02) as German Standard) / Note: DIN ETS standards collection*Endorsement notice
 
DIN

DIN EN 301469-7:2002-05
En Vigor
2002-05-01
Digital Enhanced Cordless Telecommunications (DECT) - DECT Packet Radio Service (DPRS) Test Case Library (TCL) - Part 7: Test Suite Structure (TSS) and Test Purposes (TP) for Network (NWK) layer (Endorsement of the English version EN 301469-7 V 1.1.1 (2000-10) as German standard) / Note: DIN ETS standards collection*Endorsement notice
 
DIN

DIN EN 3696:2003-03
En Vigor
2003-03-01
Aerospace series - Washers in heat resisting steel; German and English version EN 3696:2001
 
DIN

DIN EN 14420-8:2016-06
En Vigor
2016-06-01
Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system); German version EN 14420-8:2013+A1:2016
 
DIN

DIN EN 301062-2:2001-09
En Vigor
2001-09-01
Integrated Services Digital Network (ISDN) - Signalling System No. 7; Support of Virtual Private Network (VPN) applications with Private network Q reference point Signalling System number 1 (PSS1) information flows - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the English version EN 301062-2 V 1.1.1 (2000-08) as German Standard) / Note: DIN ETS standards collection*Endorsement notice
 
DIN

DIN EN 14143:2013-10
En Vigor
2013-10-01
Respiratory equipment - Self-contained re-breathing diving apparatus; German version EN 14143:2013
 
DIN

DIN EN 62754:2018-11
En Vigor
2018-11-01
Computation of waveform Parameter uncertainties (IEC 62754:2017); German version EN 62754:2017
 
DIN

DIN EN 950:1999-11
En Vigor
1999-11-01
Door leaves - Determination of the resistance to hard body impact; German version EN 950:1999
 
DIN

DIN EN 60359:2002-09
En Vigor
2002-09-01
Electrical and electronic measurement equipment - Expression of the performance (IEC 60359:2001); German version EN 60359:2002 / Note: DIN IEC 60359 (1993-09) remains valid alongside this standard until 2005-03-01.
 
DIN

DIN EN ISO 9606-3:1999-06
En Vigor
1999-06-01
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999); German version EN ISO 9606-3:1999 / Note: To be replaced by DIN EN ISO 9606 (2024-10).
 
DIN

DIN EN 1993-1-5/NA:2018-11
En Vigor
2018-11-01
National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 1-5: Plated structural elements / Note: Applies in conjunction with DIN EN 1993-1-5 (2017-07).
 
DIN

DIN EN ISO 11833-2:2006-06
En Vigor
2006-06-01
Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2 : Sheets of thickness less than 1mm (ISO 11833-2:1998); German version EN ISO 11833-2:2006
 
DIN

DIN EN 60645-1:2018-08
En Vigor
2018-08-01
Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry (IEC 60645-1:2017); German version EN 60645-1:2017 / Note: DIN EN 60645-1 (2015-11) remains valid alongside this standard until 2020-10-06.
 
DIN

DIN EN 4426:2020-05
En Vigor
2020-05-01
Aerospace series - Non-metallic materials - Textiles - Test method - Determination of conductivity and pH of aqueous extracts; German and English version EN 4426:2020
 
DIN

DIN EN 301469-6:2002-05
En Vigor
2002-05-01
Digital Enhanced Cordless Telecommunications (DECT) - DECT Packet Radio Service (DPRS) Test Case Library (TCL) - Part 6: Abstract Test Suite (ATS); Data Link Control (DLC) layer; Fixed radio Termination (FT) (Endorsement of the English version EN 301469-6 V 1.1.1 (2000-10) as German standard) / Note: DIN ETS standards collection*Endorsement notice
 
DIN

DIN EN 131700:1998-10
En Vigor
1998-10-01
Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric; German version EN 131700:1997
 
DIN

DIN EN 15978:2024-05
En Vigor
2024-05-01
Sustainability of construction works - Assessment of environmental performance of buildings - Methology; German and English version prEN 15978:2024 / Note: Date of issue 2024-04-19*Intended as replacement for DIN EN 15978 (2012-10).