Normas DIN
Filtrar:
DIN
DIN EN 17289-2:2021-02
En Vigor
2021-02-01
Characterization of bulk materials - Determination of a size-weighted
fine fraction and crystalline silica content - Part 2: Calculation
method; German version EN 17289-2:2020
DIN
DIN EN 2997-015:2011-09
En Vigor
2011-09-01
Aerospace series - Connectors, electrical, circular, coupled by threaded
ring, fire-resistant or non fire-resistant, operating temperatures -65
°C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 015:
Jam-nut mounted receptacle with integrated accessory - Product standard;
German and English Version EN 2997-015:2011
DIN
DIN EN 1793-2:2023-08
En Vigor
2023-08-01
Road traffic noise reducing devices - Test method for determining the
acoustic performance - Part 2: Intrinsic characteristics of airborne
sound insulation under diffuse sound field conditions; German and
English version prEN 1793-2:2023 / Note: Date of issue
2023-07-21*Intended as replacement for DIN EN 1793-2 (2019-05).
DIN
DIN EN 6024:2024-09
En Vigor
2024-09-01
Aerospace series - Screw, 100° countersunk reduced head, offset
cruciform recess, close tolerance shank, short thread, in titanium
alloy, anodized, MoS<(Index)2> lubricated - Classification: 1 100
MPa (at ambient temperature)/315 °C - Inch series; German and English
version EN 6024:2024
DIN
DIN EN 12697-41:2023-03
En Vigor
2023-03-01
Bituminous mixtures - Test methods - Part 41: Resistance to de-icing
fluids; German version EN 12697-41:2023
DIN
DIN IEC 60746-5:1996-07
En Vigor
1996-07-01
Expression of performance of electrochemical analyzers - Part 5:
Oxidation-reduction potential or redox potential (IEC 60746-5:1992)
DIN
DIN EN 1316-1:2013-01
En Vigor
2013-01-01
Hardwood round timber - Qualitative classification - Part 1: Oak and
beech; German version EN 1316-1:2012
DIN
DIN 876-1:1984-08
En Vigor
1984-08-01
Surface plates; natural hard rock surface plates; requirements and
testing / Note: To be replaced by DIN 876-1 (2009-11).
DIN
DIN EN 15434-1:2023-06
En Vigor
2023-06-01
Bonding sealants - Part 1: Bonded glazing sealants for direct light
exposure; German version EN 15434-1:2023
DIN
DIN EN 61300-2-19 Berichtigung 1:2020-08
En Vigor
2020-08-01
Fibre optic interconnecting devices and passive components - Basic test
and measurement procedures - Part 2-19: Tests Damp heat (steady state)
(IEC 61300-2-19:2012/COR1:2020); German version EN 61300-2-19:2013/AC:2020-04
DIN
DIN EN 62137-3:2012-08
En Vigor
2012-08-01
Electronics assembly technology - Part 3: Selection guidance of
environmental and endurance test methods for solder joints (IEC
62137-3:2011); German version EN 62137-3:2012
DIN
DIN EN 16603-33-11:2019-09
En Vigor
2019-09-01
Space engineering - Explosive subsystems and devices; English version EN 16603-33-11:2019
DIN
DIN EN 62388 Berichtigung 1:2014-05
En Vigor
2014-05-01
Maritime navigation and radiocommunication equipment and systems -
Shipborne radar - Performance requirements, methods of testing and
required test results (IEC 62388:2013); English Version EN 62388:2013,
Corrigendum to DIN EN 62388:2014-04; (IEC-Cor.:2014 to IEC 62388:2013)
DIN
DIN EN 12946:2023-08
En Vigor
2023-08-01
Liming materials - Determination of the calcium content and magnesium
content - Complexometric method; German version EN 12946:2023
DIN
DIN EN 300175-1:2022-09
En Vigor
2022-09-01
Digital Enhanced Cordless Telecommunications (DECT) - Common Interface
(CI) - Part 1: Overview (Endorsement of the English version EN 300 175-1
V2.9.1 (2022-03) as a German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 16907-1:2019-04
En Vigor
2019-04-01
Earthworks - Part 1: Principles and general rules; German version EN 16907-1:2018
DIN
DIN EN IEC 61191-1:2019-06
En Vigor
2019-06-01
Printed board assemblies - Part 1: Generic specification - Requirements
for soldered electrical and electronic assemblies using surface mount
and related assembly technologies (IEC 61191-1:2018); German version EN
IEC 61191-1:2018 / Note: DIN EN 61191-1 (2014-02) remains valid
alongside this standard until 2021-10-19.
DIN
DIN
DIN IEC 60261:1991-05
En Vigor
1991-05-01
Sealing test for pressurized waveguide; tubing and assemblies; identical
with IEC 60261:1989; german version HD 138 S2:1990
DIN
DIN EN 13523-20:2020-08
En Vigor
2020-08-01
Coil coated metals - Test methods - Part 20: Foam adhesion; German
version EN 13523-20:2020
DIN
DIN 65452:1988-08
En Vigor
1988-08-01
Aerospace; spotlights with 100 mm, 134 mm and 200 mm effective diameter;
technical specification
DIN
DIN EN 4632-004 Berichtigung 1:2014-03
En Vigor
2014-03-01
Aerospace series - Weldability and brazeability of materials in
aerospace constructions - Part 004: Welding and brazing of homogeneous
assemblies of high alloyed steels; German version EN 4632-004:2012,
Corrigendum to DIN EN 4632-004:2013-11
DIN
DIN EN 50377-18-1:2019-11
En Vigor
2019-11-01
Connector sets and interconnect components to be used in optical fibre
communication systems - Product specifications - Part 18-1: type
4+4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector
equipped with 12 fibre PPS ferrules terminated on EN 60793-2-10 category
A1a.3a or A1a.3b 50/125 micron multimode fibre; German version EN 50377-18-1:2019
DIN
DIN 19559-2:1983-07
En Vigor
1983-07-01
Measurement of flow of waste water in open channels and gravity
conduits; venturi flumes
DIN
DIN EN 60188:2019-10
En Vigor
2019-10-01
High-pressure mercury vapour lamps - Performance specifications (IEC
60188:2001); German version EN 60188:2001 + A11:2019 / Note: DIN EN
60188 (2002-03) remains valid alongside this standard until 2021-12-26.
DIN
DIN EN 15254-7:2018-06
En Vigor
2018-06-01
Extended application of results from fire resistance tests -
Non-loadbearing ceilings - Part 7: Metal sandwich panel construction;
German version EN 15254-7:2018 / Note: To be replaced by DIN EN 15254-7 (2025-01).
DIN
DIN EN 62047-13:2012-10
En Vigor
2012-10-01
Semiconductor devices - Micro-electromechanical devices - Part 13: Bend-
and shear- type test methods of measuring adhesive strength for MEMS
structures (IEC 62047-13:2012); German version EN 62047-13:2012
DIN
DIN EN 15004-5:2020-12
En Vigor
2020-12-01
Fixed firefighting systems - Gas extinguishing systems - Part 5:
Physical properties and system design of gas extinguishing systems for
HFC 227ea extinguishant (ISO 14520-9:2019, modified); German version EN 15004-5:2020
DIN
DIN EN 15842:2019-12
En Vigor
2019-12-01
Foodstuffs - Detection of food allergens - General considerations and
validation of methods; German version EN 15842:2019
DIN
DIN EN 14112:2021-02
En Vigor
2021-02-01
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) -
Determination of oxidation stability (accelerated oxidation test);
German version EN 14112:2020
DIN
DIN EN 4838-005:2019-10
En Vigor
2019-10-01
Aerospace series - Arc fault circuit breakers, single-pole, temperature
compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz Constant
Frequency - Part 005: With polarized signal contact - Product standard;
German and English version EN 4838-005:2019
DIN
DIN EN 16252:2013-03
En Vigor
2013-03-01
Machines for compacting waste materials or recyclable fractions -
Horizontal baling presses - Safety requirements; German version EN 16252:2012
DIN
DIN EN 3774-006:2024-04
En Vigor
2024-04-01
Aerospace series - Circuit breakers, three-poles, temperature
compensated, rated currents 1 A to 25 A - Part 006: 6,3 blade terminal -
Product standard; German and English version EN 3774-006:2023
DIN
DIN EN 12561-1:2011-10
En Vigor
2011-10-01
Railway applications - Tank wagons - Part 1: Identification plates for
tank wagons for the carriage of dangerous goods; German version EN 12561-1:2011
DIN
DIN EN 419211-1:2014-12
En Vigor
2014-12-01
Protection profiles for secure signature creation device - Part 1:
Overview; German version EN 419211-1:2014
DIN
DIN EN 1604:2013-05
En Vigor
2013-05-01
Thermal insulating products for building applications - Determination of
dimensional stability under specified temperature and humidity
conditions; German version EN 1604:2013
DIN
DIN EN 13523-13:2014-08
En Vigor
2014-08-01
Coil coated metals - Test methods - Part 13: Resistance to accelerated
ageing by the use of heat; German version EN 13523-13:2014
DIN
DIN 15018-3:1984-11
En Vigor
1984-11-01
Cranes; principles relating to steel structures; design of cranes on vehicles
DIN
DIN EN 6096:2019-08
En Vigor
2019-08-01
Aerospace series - Bearing, spherical plain with self-lubricating liner,
extra wide inner ring in corrosion resisting steel - Dimensions and
loads - Inch series; German and English version EN 6096:2019
DIN
DIN EN 61189-11:2014-02
En Vigor
2014-02-01
Test methods for electrical materials, printed boards and other
interconnection structures and assemblies - Part 11: Measurement of
melting temperature or melting temperature ranges of solder alloys (IEC
61189-11:2013); German version EN 61189-11:2013
DIN
DIN EN IEC 63246-3:2023-08
En Vigor
2023-08-01
Configurable car infotainment services (CCIS) - Part 3: Framework (IEC
63246-3:2022); German version EN IEC 63246-3:2022
DIN
DIN EN 17106-3-1:2022-04
En Vigor
2022-04-01
Road operation machinery - Safety - Part 3-1: Winter service machines -
Requirements for snow clearing machines with rotating tools and snow
ploughs; German version EN 17106-3-1:2021
DIN
DIN EN IEC 60268-4:2019-08
En Vigor
2019-08-01
Sound system equipment - Part 4: Microphones (IEC 60268-4:2018); German
version EN IEC 60268-4:2018 / Note: DIN EN 60268-4 (2016-07) remains
valid alongside this standard until 2021-10-17.
DIN
DIN EN 1254-7:2021-10
En Vigor
2021-10-01
Copper and copper alloys - Plumbing fittings - Part 7: Press fittings
for use with metallic tubes; German version EN 1254-7:2021
DIN
DIN EN 2240-075:2011-10
En Vigor
2011-10-01
Aerospace series - Lamps, incandescent - Part 075: Lamp, code 5448 -
Product standard; German and English version EN 2240-075:2011 / Note:
Applies in conjunction with DIN EN 2756 (2010-09).
DIN
DIN 41571-3:1984-06
En Vigor
1984-06-01
Miniature fuses; cartridge fuse links 250 V; interchangeable, time-lag (T)
DIN
DIN EN 13205-6:2014-09
En Vigor
2014-09-01
Workplace exposure - Assessment of sampler performance for measurement
of airborne particle concentrations - Part 6: Transport and handling
tests; German version EN 13205-6:2014
DIN
DIN EN 413-1:2011-07
En Vigor
2011-07-01
Masonry cement - Part 1: Composition, specifications and conformity
criteria; German version EN 413-1:2011 / Note: To be replaced by DIN EN
413-1 (2018-07).
DIN
DIN EN IEC 61158-3-28:2024-06
En Vigor
2024-06-01
Industrial communication networks - Fieldbus specifications - Part 3-28:
Data-link layer service definition - Type 28 elements (IEC
61158-3-28:2023); English version EN IEC 61158-3-28:2023
DIN
DIN EN 15101-1:2019-07
En Vigor
2019-07-01
Thermal insulation products for buildings - In-situ formed loose fill
cellulose (LFCI) products - Part 1: Specification for the products
before installation; German version EN 15101-1:2013+A1:2019
DIN
DIN EN 3299:2019-12
En Vigor
2019-12-01
Aerospace series - Shaft-nuts and threaded rings, self-locking, right-
or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286),
silver plated - Technical specification; German and English version EN 3299:2019
DIN
DIN EN 17289-1:2021-02
En Vigor
2021-02-01
Characterization of bulk materials - Determination of a size-weighted
fine fraction and crystalline silica content - Part 1: General
information and choice of test methods; German version EN 17289-1:2020
DIN
DIN EN 888:2023-05
En Vigor
2023-05-01
Chemicals used for treatment of water intended for human consumption -
Iron (III) chloride; German version EN 888:2023 / Note: This standard is
part of the DVGW body of rules.
DIN
DIN EN 12101-8:2011-08
En Vigor
2011-08-01
Smoke and heat control systems - Part 8: Smoke control dampers; German
version EN 12101-8:2011
DIN
DIN 22129-2:1988-02
En Vigor
1988-02-01
Steelcord conveyor belts for underground coalmining; marking
DIN
DIN EN 1048:2014-11
En Vigor
2014-11-01
Heat exchangers - Air cooled liquid coolers ('dry coolers') - Test
procedures for establishing the performance; German version EN 1048:2014
DIN
DIN IEC 60122-2:1993-09
En Vigor
1993-09-01
Quartz crystal units for frequency control and selection; part 2: guide
to the use of quartz crystal units for frequency control and selection;
identical with IEC 60122-2:1983
DIN
DIN EN 1012-3:2014-04
En Vigor
2014-04-01
Compressors and vacuum pumps - Safety requirements - Part 3: Process
compressors; German version EN 1012-3:2013
DIN
DIN EN 10219-3:2020-11
En Vigor
2020-11-01
Cold formed welded steel structural hollow sections - Part 3: Technical
delivery conditions for high strength and weather resistant steels;
German version EN 10219-3:2020
DIN
DIN 7473:1983-12
En Vigor
1983-12-01
Plain bearings; thick-walled multilayer plain bearings with cylindrical
bore, undivided
