AENOR Logo

Normas DIN

144175 Resultados disponibles

Filtrar:

(109277)
(34898)
DIN

DIN EN ISO 16048:2003-06
En Vigor
2003-06-01
Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003
 
DIN

DIN EN 61196-3-2:1998-06
En Vigor
1998-06-01
Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring; detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997); German version EN 61196-3-2:1997
 
DIN

DIN EN IEC 61223-3-6:2022-05
En Vigor
2022-05-01
Evaluation and routine testing in medical imaging departments - Part 3-6: Acceptance and constancy tests - Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation (IEC 61223-3-6:2020); German version EN IEC 61223-3-6:2020
 
DIN

DIN EN 13706-3:2003-02
En Vigor
2003-02-01
Reinforced plastic composites - Specifications for pultruded profiles - Part 3: Specific requirements; German version EN 13706-3:2002
 
DIN

DIN EN 62922:2022-06
En Vigor
2022-06-01
Organic light emitting diode (OLED) panels for general lighting - Performance requirements (IEC 62922:2016 + A1:2021); German version EN 62922:2017 + A1:2021 / Note: DIN EN 62922 (2017-08) remains valid alongside this standard until 2024-09-30.
 
DIN

DIN EN 4416:2007-08
En Vigor
2007-08-01
Aerospace series - Non-metallic materials - Textiles - Wide woven fabrics - Technical specification; German and English version EN 4416:2006
 
DIN

DIN EN 124-3:2015-09
En Vigor
2015-09-01
Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys; German version EN 124-3:2015 / Note: Applies in conjunction with DIN EN 124-1 (2015-09).
 
DIN

DIN EN 16603-60-30:2015-12
En Vigor
2015-12-01
Space engineering - Satellite AOCS requirements; English version EN 16603-60-30:2015
 
DIN

DIN ISO 13542:2007-03
En Vigor
2007-03-01
Paper and board - Specification for internal diameters of cores for reels (ISO 13542:2006)
 
DIN

DIN EN 15027:2010-03
En Vigor
2010-03-01
Transportable wall saw and wire saw equipment for job site - Safety; German version EN 15027:2007+A1:2009 / Note: To be replaced by DIN EN 15027 (2024-02).
 
DIN

DIN EN 1504-9:2008-11
En Vigor
2008-11-01
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems; German version EN 1504-9:2008
 
DIN

DIN 72553:1994-04
En Vigor
1994-04-01
Battery jumper cable for road vehicles with combustion engines; dimensions, requirements, test
 
DIN

DIN EN 17542-1:2022-08
En Vigor
2022-08-01
Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard; German version EN 17542-1:2022
 
DIN

DIN EN 60843-3:1994-01
En Vigor
1994-01-01
Helical-scan video tape cassette system using 8 mm magnetic tape-8 mm Video; part 3: high-band specifications for Hi 8 (IEC 60843-3:1993); German version EN 60843-3:1993
 
DIN

DIN 1478:2005-09
En Vigor
2005-09-01
Turnbuckles made from steel tubes or round steel bars
 
DIN

DIN EN 3476:2007-04
En Vigor
2007-04-01
 
DIN

DIN EN 2713-012:2022-10
En Vigor
2022-10-01
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver-plated copper screened (spiral) and jacketed, UV laser printable - Product standard; German and English version EN 2713-012:2022
 
DIN

DIN EN 60617-13:1994-01
En Vigor
1994-01-01
Graphical symbols for diagrams; part 13: analogue elements (IEC 60617-13:1993); German version EN 60617-13:1993
 
DIN

DIN EN 1338 Berichtigung 1:2006-11
En Vigor
2006-11-01
Concrete paving blocks - Requirements and test methods; German version EN 1338:2003, Corrigenda to DIN EN 1338:2003-08; German version EN 1338:2003/AC:2006 / Note: To be replaced by DIN EN 1338 (2010-08).
 
DIN

DIN EN 2349-413:2008-02
En Vigor
2008-02-01
Aerospace series - Requirements and test procedures for relays and contactors - Part 413: Vibration, sinusoidal and random; German and English version EN 2349-413:2007 / Note: Applies in conjunction with DIN EN 2349-100.
 
DIN

DIN EN 61143-1:1995-01
En Vigor
1995-01-01
Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements (IEC 61143-1:1992); German version EN 61143-1:1994
 
DIN

DIN SPEC 45674:2018-03
En Vigor
2018-03-01
Human exposure to mechanical vibration - Knowledge for performing and evaluation of measurements
 
DIN

DIN EN 14264:2003-12
En Vigor
2003-12-01
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Impregnating pitch - Characteristics and test methods; German version EN 14264:2003
 
DIN

DIN EN 9721:2022-09
En Vigor
2022-09-01
Aerospace series - General recommendation for the BIT Architecture in an integrated system; German and English version EN 9721:2021
 
DIN

DIN EN 61183:1994-12
En Vigor
1994-12-01
Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters (IEC 61183:1994); German version EN 61183:1994
 
DIN

DIN EN 13892-2:2003-02
En Vigor
2003-02-01
Methods of test for screed materials - Part 2: Determination of flexural and compressive strength; German version EN 13892-2:2002
 
DIN

DIN EN 3773-004:2014-12
En Vigor
2014-12-01
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard; German and English version EN 3773-004:2014
 
DIN

DIN EN 15467:2015-03
En Vigor
2015-03-01
Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements; German version EN 15467:2014 / Note: To be replaced by DIN EN 15467 (2022-11).*To be amended by DIN EN 15467/A1 (2019-04).
 
DIN

DIN EN 15647:2009-04
En Vigor
2009-04-01
Surface active agents - Determination of the dispersing effect of surfactants on powder; German version EN 15647:2009
 
DIN

DIN 45645-1:1996-07
En Vigor
1996-07-01
Determination of rating levels from measurement data - Part 1: Noise immission in the neighbourhood
 
DIN

DIN EN 190100:1995-02
En Vigor
1995-02-01
Sectional specification: Digital monolithic integrated circuits; German version EN 190100:1993
 
DIN

DIN EN 14879-4:2008-01
En Vigor
2008-01-01
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components; German version EN 14879-4:2007
 
DIN

DIN EN 15863:2015-06
En Vigor
2015-06-01
Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions; German version EN 15863:2015
 
DIN

DIN EN 60191-6-16:2007-11
En Vigor
2007-11-01
Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA (IEC 60191-6-16:2007); German version EN 60191-6-16:2007 / Note: To be replaced by DIN EN 60191-6-16 (2013-08).
 
DIN

DIN EN 16603-50-14:2014-12
En Vigor
2014-12-01
Space engineering - Spacecraft discrete interfaces; English version EN 16603-50-14:2014
 
DIN

DIN ETS 300572:1995-08
En Vigor
1995-08-01
European digital cellular telecommunications system (phase 2) - Unstructured Supplementary Service Data (USSD), stage 3; English version ETS 300572:1995
 
DIN

DIN EN 3060:2008-02
En Vigor
2008-02-01
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated - Dimensions and loads; German and English version EN 3060:2007
 
DIN

DIN EN 12516-3:2003-01
En Vigor
2003-01-01
Valves - Shell design strength - Part 3: Experimental method; German version EN 12516-3:2002
 
DIN

DIN EN 303345-2:2022-05
En Vigor
2022-05-01
Broadcast Sound Receivers - Part 2: AM broadcast sound service - Harmonised Standard for access to radio spectrum (Endorsement of the English version EN 303 345-2 V1.2.1 (2021-12) as a German standard) / Note: DIN ETS standards collection*Endorsement notice
 
DIN

DIN EN 14020-3:2003-03
En Vigor
2003-03-01
Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements; German version EN 14020-3:2002
 
DIN

DIN EN 4194:2002-08
En Vigor
2002-08-01
Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, reduced, bulkhead; German version EN 4194:2001
 
DIN

DIN EN 1253-2:2015-03
En Vigor
2015-03-01
Gullies for buildings - Part 2: Roof drains and floor gullies without trap; German version EN 1253-2:2015
 
DIN

DIN EN 12944-1:2000-03
En Vigor
2000-03-01
Fertilizers and liming materials - Vocabulary - Part 1: General terms (including corrigendum AC:2000); German version EN 12944-1:1999 + AC:2000
 
DIN

DIN EN 61254:1994-12
En Vigor
1994-12-01
Electric shavers for household use - Methods for measuring the performance (IEC 61254:1993); German version EN 61254:1994
 
DIN

DIN ETS 300570:1995-08
En Vigor
1995-08-01
European digital cellular telecommunications system (phase 2) - Advice of Charge (AoC) supplementary services, stage 3; English version ETS 300570:1995
 
DIN

DIN EN 4464:2007-10
En Vigor
2007-10-01
 
DIN

DIN EN 60835-1-3:1995-04
En Vigor
1995-04-01
Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations; section 3: Transmission characteristics (IEC 60835-1-3:1992); German version EN 60835-1-3:1995
 
DIN

DIN EN 29314-2:1993-12
En Vigor
1993-12-01
Information processing systems; fibre distributed date interface (FDDI); part 2: token ring media access control (MAC) (ISO 9314-2:1989); English version EN 29314-2:1993
 
DIN

DIN ISO 8406:2010-05
En Vigor
2010-05-01
Tools for moulding - Mould bases - Round locating elements and spacers (ISO 8406:2008)
 
DIN

DIN EN 17542-3:2022-08
En Vigor
2022-08-01
Earthworks - Geotechnical laboratory tests - Part 3: Methylene blue value V<(Index)BS> on soils and rocks; German version EN 17542-3:2022
 
DIN

DIN EN 10341:2006-08
En Vigor
2006-08-01
Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state; German version EN 10341:2006
 
DIN

DIN EN IEC 61188-6-1:2022-08
En Vigor
2022-08-01
Circuit boards and circuit board assemblies - Design and use - Part 6-1: Land pattern design - Generic requirements for land pattern on circuit boards (IEC 61188-6-1:2021); German version EN IEC 61188-6-1:2021 / Note: DIN EN 61188-5-1 (2003-06) remains valid alongside this standard until 2024-03-30.
 
DIN

DIN EN 2941:2009-07
En Vigor
2009-07-01
Aerospace series - Nickel alloy rivets - Technical specification; German and English version EN 2941:2008
 
DIN

DIN EN 3789:2004-09
En Vigor
2004-09-01
Aerospace series - Pipe coupling 8°30 - Protective plugs with external threads; German and English version EN 3789:2001 + AC:2003
 
DIN

DIN EN 60870-2-1:1997-07
En Vigor
1997-07-01
Telecontrol equipment and systems - Part 2: Operating conditions; section 1: Power supply and electromagnetic compatibility (IEC 60870-2-1:1995); German version EN 60870-2-1:1996
 
DIN

DIN EN 15055:2006-08
En Vigor
2006-08-01
Non fatty foods - Determination of chlormequat and mepiquat - LC-MS/MS method; German version EN 15055:2006
 
DIN

DIN EN 61274-1-1:2012-10
En Vigor
2012-10-01
Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1-1: Blank detail specification (IEC 61274-1-1:2011); German version EN 61274-1-1:2012 / Note: DIN EN 61274-1-1 (2007-05) remains valid alongside this standard until 2012-12-22.
 
DIN

DIN EN 61834-11:2008-09
En Vigor
2008-09-01
Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 11: HDV format for 1080i and 720p systems (IEC 61834-11:2008); German version EN 61834-11:2008
 
DIN

DIN EN 300394-4-6:2001-08
En Vigor
2001-08-01
Terrestrial Trunked Radio (TETRA) - Conformance testing specification - Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 4-6: Abstract Test Suite (ATS) for Direct Mode Repeater (DM-REP) type 1 (Endorsement of the English version EN 300394-4-6 V 1.1.1 (2001-01) as German standard) / Note: DIN ETS standards collection*Endorsement notice
 
DIN

DIN ISO 10072:2005-09
En Vigor
2005-09-01
Tools for moulding - Sprue bushes - Dimensions (ISO 10072:2004)