AENOR Logo

Normas DIN

144175 Resultados disponibles

Filtrar:

(109283)
(34892)
DIN

DIN 81846-1:2021-08

En Vigor
2021-08-01
Stud link anchor chain cables, Grade K4 - Assembly, applied forces and breaking forces - Part 1: Type A with chain outboard shots; Text in German and English
 
DIN

DIN 79006-3:2020-02

En Vigor
2020-02-01
Athletics - Running disciplines - Part 3: Requirements and test methods for obstacles
 
DIN

DIN 32645:2008-11

En Vigor
2008-11-01
Chemical analysis - Decision limit, detection limit and determination limit under repeatability conditions - Terms, methods, evaluation
 
DIN

DIN 41571-2:1984-06

En Vigor
1984-06-01
Miniatur fuses; cartridge fuse links 250 V, interchangeable, medium time-lag (M)
 
DIN

DIN 81907:1997-12

En Vigor
1997-12-01
Pedestal fair leads
 
DIN

DIN 18873-16:2016-02

En Vigor
2016-02-01
Methods for measuring the energy consumption of commercial kitchen appliances - Part 16: Kitchen Machinery
 
DIN

DIN 52045-1:2015-08

En Vigor
2015-08-01
Bitumen and bituminous binders - Evaporation test - Part 1: Testing of petroleum cut-back bitumen
 
DIN

DIN 8514:2006-05

En Vigor
2006-05-01
Brazeability, solderability
 
DIN

DIN 61651:2004-05

En Vigor
2004-05-01
Machinery cleaning cloths
 
DIN

DIN 18709-1:2020-03

En Vigor
2020-03-01
Concepts, abbreviations and symbols in geodesy - Part 1: General
 
DIN

DIN 6868-152:2022-01

En Vigor
2022-01-01
Image quality assurance in diagnostic X-ray departments - Part 152: Acceptance test of X-ray installations for screen/film mammography
 
DIN

DIN 20583:1995-11

En Vigor
1995-11-01
Mine cars - Shackle coupling
 
DIN

DIN 55540-1 Beiblatt 3:1988-02

En Vigor
1988-02-01
Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for washing and cleaning products and similar products
 
DIN

DIN 59746:2004-07

En Vigor
2004-07-01
Strip and sheet of straightened strip sections of wrought nickel and wrought nickel alloys, cold rolled - Dimensions and tolerances on dimensions and form
 
DIN

DIN 83404-2:2022-11

En Vigor
2022-11-01
Ships and marine technology - Small ships hatchways - Part 2: Non-watertight / Note: DIN 83404-11 (2001-08) remains valid alongside this standard until 2023-04-30.
 
DIN

DIN 38415-4:1999-12

En Vigor
1999-12-01
German standard methods for the examination of water, waste water and sludge - Sub-animal testing (group T) - Part 4: Determination of the genotoxic potential using the Salmonella microsome test (Ames Test) (T 4)
 
DIN

DIN 47411:1981-04

En Vigor
1981-04-01
Telecommunication cord with stranded wires; PVC-insulation and textil braided outer covering, single conductor, dampproof
 
DIN

DIN 6475:2000-09

En Vigor
2000-09-01
Double face sledge hammers
 
DIN

DIN 49440-3:1989-12

En Vigor
1989-12-01
Two-pole socket-outlets with earthing contact rated for 10 A 250 V d.c., 16 A 250 V a.c., portable splash-proof socket-outlets
 
DIN

DIN 685-3:2001-02

En Vigor
2001-02-01
Round steel link chains, tested - Part 3: Test
 
DIN

DIN 8584-4:2003-09

En Vigor
2003-09-01
Manufacturing processes forming under combination of tensile and compressive conditions - Part 4: Spinning; Classification, subdivision, terms and definitions
 
DIN

DIN 27204-6:2015-06

En Vigor
2015-06-01
State of railway vehicles - Running gear - Part 6: Pneumatic suspension system / Note: DIN 27204-6 (2004-03) remains valid alongside this standard until 2015-11-30.
 
DIN

DIN 49860-2:2000-01

En Vigor
2000-01-01
Metal halide lamps with spectral energy distribution similar to natural light - Part 2: Sports lighting
 
DIN

DIN 51002:2020-07

En Vigor
2020-07-01
Inductively coupled plasma mass spectrometry (ICP-MS) - Principles and definitions
 
DIN

DIN 51456:2013-10

En Vigor
2013-10-01
Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)
 
DIN

DIN 22419-3:2004-12

En Vigor
2004-12-01
Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 3: Gland flanges for entries; safety requirements and testing / Note: DIN 22419-3 (1995-11) remains valid alongside this standard until 2005-05-31.
 
DIN

DIN 18213:2022-02

En Vigor
2022-02-01
Optics and optical instruments - Field procedures for testing geodetic and surveying Instruments - GNSS Instruments
 
DIN

DIN 68861-4:2013-02

En Vigor
2013-02-01
Furniture surfaces - Part 4: Behaviour at scratches
 
DIN

DIN 53536:1992-10

En Vigor
1992-10-01
Testing of rubber; determination of gas permeability
 
DIN

DIN 19242 Beiblatt 1:1987-01

En Vigor
1987-01-01
Measurement and control; performance tests on process computer systeme; time measurement; list of the published standards
 
DIN

DIN 2425-4:2022-11

En Vigor
2022-11-01
Plans for Public Utilities, Water Resources and Long-distance Lines - Part 4: Drain and sewer systems outside buildings
 
DIN

DIN 40737-3:2015-09

En Vigor
2015-09-01
Lead acid batteries - Part 3: Stationary vented batteries with positive tubular plates
 
DIN

DIN 5032-11:2020-07

En Vigor
2020-07-01
Photometry - Part 11: Near-field goniophotometers, terms, characteristics and their designation
 
DIN

DIN 20018-4:2003-04

En Vigor
2003-04-01
Textile-reinforced hoses - Part 4: Testing
 
DIN

DIN 986:2013-08

En Vigor
2013-08-01
Prevailing torque type hexagon domed cap nuts with nonmetallic insert
 
DIN

DIN 5487:1988-07

En Vigor
1988-07-01
Fourier-, laplace- and Z-transformation; symbols and concepts
 
DIN

DIN 45677:2001-01

En Vigor
2001-01-01
Mechanical impedance of the human hand-arm system at the driving point
 
DIN

DIN 18013:2020-03

En Vigor
2020-03-01
Recesses for meter boards (electric meters)
 
DIN

DIN 9020-3 Beiblatt 1:1983-10

En Vigor
1983-10-01
Aerospace; mass breakdown for aircraft heavier than air; group mass statement; condensed version
 
DIN

DIN 53350:2022-12

En Vigor
2022-12-01
Plastics films and sheeting - Determination of stiffness in bending - Two-point method (Ohlsen approach)
 
DIN

DIN 5117:2004-05

En Vigor
2004-05-01
Adjustable screw clamps
 
DIN

DIN 18317:2019-09

En Vigor
2019-09-01
German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Road construction - Asphalt surfacings
 
DIN

DIN 45642:2004-06

En Vigor
2004-06-01
Measurement of traffic noise / Note: To be amended by DIN 45642 (2013-10).
 
DIN

DIN 8958-2:1998-11

En Vigor
1998-11-01
Testing of cooling equipment for insulated means of transportation - Part 2: Transport refrigerating system with eutectic elements, dry ice and cryogenic liquid gas / Note: To be replaced by DIN 8958-2 (2007-06, t), DIN 8958-2 (2010-04, t), DIN 8958-3 (2011-08, t), DIN 8958-4 (2011-08, t), DIN 8958-5 (2011-08, t).
 
DIN

DIN 18017-3:2022-05

En Vigor
2022-05-01
Ventilation of bathrooms and toilet rooms without outside windows - Part 3: Ventilation by fans
 
DIN

DIN 50154:2019-09

En Vigor
2019-09-01
Tensile test on foils and strips of aluminum and aluminum wrought alloys with a nominal thickness less than 0,200 mm
 
DIN

DIN 81833:2008-11

En Vigor
2008-11-01
Components for anchoring equipment - Overview; Text in German and English
 
DIN

DIN 6809-9:2021-11

En Vigor
2021-11-01
Clinical Dosimetry - Part 9: Quality of photon radiation in the patient or phantom
 
DIN

DIN 25201-7:2004-06

En Vigor
2004-06-01
Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation / Note: To be replaced by DIN 25201-7 (2010-03).
 
DIN

DIN 42600-8:2013-10

En Vigor
2013-10-01
 
DIN

DIN 4000-171:2012-04

En Vigor
2012-04-01
Tabular layouts of properties - Part 171: Replaceable inserts for drilling
 
DIN

DIN 53014-1:1994-02

En Vigor
1994-02-01
Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions / Note: To be replaced by DIN 53014-1 (2019-03).
 
DIN

DIN 87153:2015-01

En Vigor
2015-01-01
Grey cast-iron coarse filters - Covers
 
DIN

DIN 4103-1:2015-06

En Vigor
2015-06-01
Internal non-loadbearing partitions - Part 1: Requirements and verification
 
DIN

DIN 3523:2022-11

En Vigor
2022-11-01
Fittings for gas and drinking water installations - Extensions / Note: This standard is part of the DVGW body of rules.
 
DIN

DIN 22419-2:2004-12

En Vigor
2004-12-01
Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 2: Gland adaptors for entries; safety requirements and testing / Note: DIN 22419-2 (1995-11) remains valid alongside this standard until 2005-05-31.
 
DIN

DIN 87160-2:2015-05

En Vigor
2015-05-01
Metal strainers, DN 20 to DN 200 - Part 2: Components
 
DIN

DIN 69882-9:2021-09

En Vigor
2021-09-01
Tool holders with hollow taper shanks according to ISO 12164-1 - Part 9: Axial adjusting screws for tool holders according to DIN 69882-7 and DIN 69882-8 - Types, designs, dimensions
 
DIN

DIN 54802-1:2015-07

En Vigor
2015-07-01
Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 1: Planetary mixer method
 
DIN

DIN 43771:1989-12

En Vigor
1989-12-01
Measurement and control; electrical temperature sensors; fast response thermometers / Note: To be replaced by DIN 43735-3 (2005-04).