Normas DIN
Filtrar:
DIN
DIN 3580-4:2022-08
En Vigor
2022-08-01
Surface boxes and ground plates - Part 4: Conformity assessment / Note:
This standard is part of the DVGW body of rules.*Applies in conjunction
with DIN 3580-1 (2022-08), DIN 3580-2 (2022-08).
DIN
DIN 69063-2:2003-05
En Vigor
2003-05-01
Machine tools - Tool receiver for hollow taper shanks - Part 2: For type
B and type D according to DIN 69893; Connecting dimensions
DIN
DIN
DIN 72786-1:2001-08
En Vigor
2001-08-01
Windscreen wiper systems for road vehicles - Wiper arm - Part 1: Type A
wiper blades for hook fastening
DIN
DIN
DIN 6853-2:2022-11
En Vigor
2022-11-01
Medical remote-controlled automatically-driven afterloading systems -
Part 2: Radiation protection rules for installation
DIN
DIN 58953-8:2019-03
En Vigor
2019-03-01
Sterilization - Sterile supply - Part 8: Logistics of sterile medical devices
DIN
DIN 52354:2020-12
En Vigor
2020-12-01
Headform impact test with deceleration measurement on glass and plastic
safety panes for vehicle glazing
DIN
DIN 1986-4:2019-08
En Vigor
2019-08-01
Drainage systems on private ground - Part 4: Fields of application of
sewage pipes and fittings of different materials
DIN
DIN 3872:2012-02
En Vigor
2012-02-01
Non-soldering compression couplings - Union nuts for butt joints
DIN
DIN 18182-2:2019-12
En Vigor
2019-12-01
Accessories for use with gypsum plasterboards - Part 2: Dry wall screws,
staples and nails
DIN
DIN
DIN
DIN 6878-1:2013-01
En Vigor
2013-01-01
Digital archiving in medical radiology - Part 1: General requirements
for the archiving of images
DIN
DIN 6094-10:1998-02
En Vigor
1998-02-01
Means of packaging - Finishes for wide-mouthed glass containers - Part
10: Beaded edge finishes
DIN
DIN 59765:2008-05
En Vigor
2008-05-01
Round bars of wrought nickel and wrought nickel alloys, drawn -
Dimensions and tolerances on dimensions and form
DIN
DIN 5696-1:2015-06
En Vigor
2015-06-01
Round steel link chains - Round steel link chains, pitch 3,5d, for chain
strands in bucket elevators - Part 1: Grade 2, case hardened / Note: DIN
764-1 (1992-09) remains valid alongside this standard until 2015-12-01.
DIN
DIN 10316:2000-08
En Vigor
2000-08-01
Acidity test of milk and liquid milk products according to Soxhlet-Henkel
DIN
DIN 65268:2020-08
En Vigor
2020-08-01
Aerospace series - Hexagon bolts, with MJ thread, short thread, titanium
alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 °C
DIN
DIN 59781:2008-05
En Vigor
2008-05-01
Round wires of wrought nickel and wrought nickel alloys, drawn -
Dimensions and tolerances on dimensions and form
DIN
DIN
DIN 8140-1:2022-04
En Vigor
2022-04-01
Wire thread inserts for ISO metric screw threads - Part 1: Dimensions,
technical specifications
DIN
DIN 55440-1:2019-10
En Vigor
2019-10-01
Packaging test - Determination of compression resistance - Part 1: Test
with constant conveyance speed
DIN
DIN 18865-9:2021-10
En Vigor
2021-10-01
Equipment for commercial kitchens - Food distribution equipment - Part
9: Equipment-insides in basic and hygiene version - Requirements and
testing / Note: DIN 18865-9 (1997-03) remains valid alongside this
standard until 2022-03-31.
DIN
DIN 10113-1:2023-02
En Vigor
2023-02-01
Horizontal method for the determination of surface colony count and
detection of specific microorganisms on fitment and utensils along the
food chain - Part 1: Swab method
DIN
DIN 58639:1998-08
En Vigor
1998-08-01
Respiratory protective devices for self-rescue - Self-contained
closed-circuit compressed oxygen breathing apparatus incorporating a
hood - Requirements, testing, marking
DIN
DIN 51308:2019-08
En Vigor
2019-08-01
Verification of auxiliary devices for application and measuring of
forces in building - Clamp-devices, hydraulic cylinders, dynamometer for
clamp aim
DIN
DIN 20000-4:2013-08
En Vigor
2013-08-01
Application of construction products in structures - Part 4:
Prefabricated structural members assembled with punched metal plate
fasteners according to DIN EN 14250:2010-05 / Note: To be replaced by
DIN 20000-4 (2016-11), DIN 20000-4 (2022-09).
DIN
DIN 58750-1:2013-01
En Vigor
2013-01-01
Production in optical engineering - Test of polishing agents for optical
engineering - Part 1: Physical and colloidal properties
DIN
DIN 4003-90:2018-12
En Vigor
2018-12-01
Concept for the design of 3D models based on properties according to DIN
4000 - Part 90: Tool holders for indexable inserts / Note: Applies in
conjunction with DIN 4000-90 (2011-12), DIN 4003-1 (2017-10).
DIN
DIN 8541-2:2021-08
En Vigor
2021-08-01
Hoses for welding, cutting and allied processes - Part 2: Hoses with
coatings for fuel gas, oxygen and other non combustible gases / Note:
DIN 8541-2 (1987-12) remains valid alongside this standard until 2022-01-31.
DIN
DIN 16917-2:2015-10
En Vigor
2015-10-01
Pipes and fittings made of thermoplastic materials with profiled wall
and smooth pipe inside - Large pipes over DN 1200 for underground
installation - Part 2: Specifications for pipes and fittings / Note:
Applies in conjunction with DIN 16917-1 (2015-10).
DIN
DIN 18008-1:2020-05
En Vigor
2020-05-01
Glass in Building - Design and construction rules - Part 1: Terms and
general bases
DIN
DIN 50159-1:2022-06
En Vigor
2022-06-01
Metallic materials - Hardness testing with the UCI method - Part 1: Test method
DIN
DIN 8584-1:2003-09
En Vigor
2003-09-01
Manufacturing processes forming under combination of tensile and
compressive conditions - Part 1: General; Classification, subdivision,
terms and definitions
DIN
DIN
DIN 18873-1:2012-12
En Vigor
2012-12-01
Methods for measuring of the energy use from equipment for commercial
kitchens - Part 1: Convection steamers / Note: To be replaced by DIN
18873-1 (2022-10).
DIN
DIN 6280-15:1997-08
En Vigor
1997-08-01
Generating sets - Reciprocating internal combustion engines driven
generating sets - Part 15: Combined heat and power system (CHPS) with
reciprocating internal combustion engines; tests
DIN
DIN 18320:2019-09
En Vigor
2019-09-01
German construction contract procedures (VOB) - Part C: General
technical specifications in construction contracts (ATV) - Landscape works
DIN
DIN 509:2022-12
En Vigor
2022-12-01
Technical product documentation - Relief grooves - Types, dimensions and tolerances
DIN
DIN
DIN 8592:2003-09
En Vigor
2003-09-01
Manufacturing processes cleaning - Classification, subdivision, terms
and definitions
DIN
DIN 19684-7:2009-01
En Vigor
2009-01-01
Soil quality - Chemical laboratory tests - Part 7: Determination of
readily soluble bivalent iron
DIN
DIN 52253 Beiblatt 1:1990-04
En Vigor
1990-04-01
Test methods for the determination of the frost resistance; burnt-clay
roofing tiles, fair faced clay bricks and clinker bricks; informations
DIN
DIN 28127 Beiblatt 1:1987-03
En Vigor
1987-03-01
Flow funnels for half-pipe coil jackets for vessels; example for calculation
DIN
DIN 43204 Berichtigung 1:2018-12
En Vigor
2018-12-01
Mounting and connecting dimensions - Traction motors for two-axle
longitudinal drive with two hollow axle shafts; Corrigendum 1
DIN
DIN 31657-4 Berichtigung 1:2019-03
En Vigor
2019-03-01
Plain bearings - Hydrodynamic plain journal bearings under steady-state
conditions - Part 4: Permissible operational parameters for calculation
of multi-lobed and tilting pad journal bearings; Corrigendum 1
DIN
DIN
DIN 50989-3:2022-04
En Vigor
2022-04-01
Ellipsometry - Part 3: Transparent single layer model; Text in German
and English
DIN
DIN 22110-2:1997-10
En Vigor
1997-10-01
Testing methods for conveyor belt joints - Part 2: Endurance running
tests, determination of running time of belt joints at conveyor belts
with textile plies
DIN
DIN
DIN 54841-5:2015-09
En Vigor
2015-09-01
Plastic warning devices for underground cables and pipelines - Part 5:
Cable cover
DIN
DIN
DIN 8077:2008-09
En Vigor
2008-09-01
Polypropylene (PP) pipes - PP-H, PP-B, PP-R, PP-RCT - Dimensions
DIN
DIN 30695-1:2022-05
En Vigor
2022-05-01
Mobile melting kettles with LPG-burners - Part 1: Safety requirement,
testing, marking / Note: This standard is part of the DVGW body of
rules.*DIN 30695 (1978-08) remains valid alongside this standard until 2022-10-31.
DIN
DIN 50002-1:2020-03
En Vigor
2020-03-01
Adhesive bondings in electronic applications - Bonding strength on
surfaces - Part 1: Tensile test
DIN
DIN
DIN 8585-4:2003-09
En Vigor
2003-09-01
Manufacturing processes forming under tensile conditions - Part 4:
Stretch forming; Classification, subdivision, terms and definitions
DIN
DIN 12242:2023-03
En Vigor
2023-03-01
Laboratory glassware - Interchangeable conical ground joints,
dimensions, tolerances
DIN
DIN 12244:2023-03
En Vigor
2023-03-01
Laboratory glassware - Interchangeable spherical ground joints,
dimensions, tolerances
