Normas DIN
Filtrar:
DIN
DIN
DIN 896:2007-10
En Vigor
2007-10-01
Tee wrenches socket, massive and tubular double head - Dimensions and
test torques series A
DIN
DIN/TS 18599 Beiblatt 3:2021-09
En Vigor
2021-09-01
Energy efficiency of buildings - Calculation of the net, final and
primary energy demand for heating, cooling, ventilation, domestic hot
water and lighting - Supplement 3: Transformation of the calculation
results of an energy balance according to DIN/TS 18599 into a
standardized output format
DIN
DIN 18550-1:2018-01
En Vigor
2018-01-01
Design, preparation and application of external rendering and internal
plastering - Part 1: Supplementary provisions for DIN EN 13914-1:2016-09
for external rendering / Note: Applies in conjunction with DIN EN
13914-1 (2016-09).*To be amended by DIN 18550-1/A1 (2022-07).
DIN
DIN 7500-2:2016-04
En Vigor
2016-04-01
Thread rolling screws for ISO metric thread - Part 2: Guideline values
for hole diameters
DIN
DIN 20000-2:2013-12
En Vigor
2013-12-01
Application of construction products in structures - Part 2:
Prefabricated timber formwork beams
DIN
DIN 55626-9:2007-07
En Vigor
2007-07-01
Extenders and pigments for paper and board - Specifications and methods
of test - Part 9: Calcined clay
DIN
DIN 20377:2009-11
En Vigor
2009-11-01
Rock drilling - Flush drills - Drill rod profiles, shanks and tapers
DIN
DIN 732:2010-05
En Vigor
2010-05-01
Rolling bearings - Thermally safe operating speed - Calculation and
correction values
DIN
DIN
DIN 23320-2:2014-10
En Vigor
2014-10-01
Flameproof protective clothing for the mining industry - Protective
clothing for people of mine rescue and gas rescue crews - Part 2:
Single-piece working suits / Note: DIN 23320-2 (2003-09) remains valid
alongside this standard until 2015-03-31.
DIN
DIN
DIN 8127:2007-11
En Vigor
2007-11-01
Weights of classes E<(Index)1>, E<(Index)2>,
F<(Index)1>, F<(Index)2>, M<(Index)1>,
M<(Index)1-2>, M<(Index)2>, M<(Index)2-3>, and
M<(Index)3> - Metrological and technical requirements (OIML R 111-1:2004)
DIN
DIN
DIN
DIN 50934-4:2024-11
En Vigor
2024-11-01
Corrosion of metals - Methods for evaluation of efficiency of water
treatment apparatus for corrosion protection - Part 4: Laboratory
corrosion test for removal of corrosion products in incrusted water
installations / Note: This standard is part of the DVGW body of rules.
DIN
DIN
DIN 1301-1:2010-10
En Vigor
2010-10-01
Units - Part 1: Unit names, unit symbols / Note: To be amended by DIN
1301-1/A1 (2023-09).
DIN
DIN
DIN
DIN
DIN 53780:2014-05
En Vigor
2014-05-01
Pigments and extenders - Determination of matter soluble in water -
Hexavalent chromium content
DIN
DIN 78004-2:2021-03
En Vigor
2021-03-01
Plastics - Thermoplastic styrene-based elastomers for moulding and
extrusion - Part 2: Preparation of test specimens and determination of properties
DIN
DIN 82019:2010-05
En Vigor
2010-05-01
Cargo lifting gear - Accessories and fittings for lifting - Ramshorn
shank hooks with metric thread, with double lug, with eye
DIN
DIN 38406-17:2009-10
En Vigor
2009-10-01
German standard methods for the examination of water, waste water and
sludge - Cations (group E) - Part 17: Determination of uranium - Method
using adsorptive stripping voltammetry in surface water, raw water and
drinking water (E 17)
DIN
DIN 86252:2017-11
En Vigor
2017-11-01
Non-return valves for shipboard use, cut-off type, of cast iron, with
flanges, DN 15 to DN 500
DIN
DIN 86021:2002-07
En Vigor
2002-07-01
Cast flanges of copper alloys - Principles of design for nominal
pressure 10, 16, 25
DIN
DIN 18328:2023-09
En Vigor
2023-09-01
German construction contract procedures (VOB) - Part C: General
technical specifications in construction contracts (ATV) - Demolition
and dismantling of traffic areas
DIN
DIN 18560-4:2012-06
En Vigor
2012-06-01
Floor screeds - Part 4: Screeds laid on separated layer / Note: Applies
in conjunction with DIN 18560-1 (2009-09), DIN EN 13813 (2003-01).
DIN
DIN 71460-2:2020-10
En Vigor
2020-10-01
Road vehicles - Air filters for passenger compartments - Part 2: Test
for gaseous filtration
DIN
DIN 18088-5:2020-10
En Vigor
2020-10-01
Structures for wind turbines and platforms - Part 5: Joints between
steel structures and concrete structures
DIN
DIN
DIN 54378:2021-02
En Vigor
2021-02-01
Testing of paper and board - Determination of the surface colony count (OKZ<(Index)s>)
DIN
DIN 3901:2018-03
En Vigor
2018-03-01
Non-soldering compression fittings with cutting ring - Double ended stud
ends with parallel thread for stud ends type A
DIN
DIN 55625-10:2021-06
En Vigor
2021-06-01
Extenders for plastics - Part 10: Natural talc and chlorite in lamellar
form, containing carbonates - Specifications and methods of test
DIN
DIN 19704-1:2014-11
En Vigor
2014-11-01
Hydraulic steel structures - Part 1: Criteria for design and calculation
DIN
DIN 4108 Beiblatt 2:2019-06
En Vigor
2019-06-01
Thermal insulation and energy economy in buildings; Supplement 2:
Thermal bridges - Examples for planning and performance, with CD-ROM
DIN
DIN
DIN/TR 55684:2023-09
En Vigor
2023-09-01
Corrosion protection of steel structures by protective paint systems -
Testing of surfaces before application of coating materials for
containments that cannot be detected visually
DIN
DIN 6800-1:2016-08
En Vigor
2016-08-01
Procedures of dosimetry with probe-type detectors for photon and
electron radiation - Part 1: General
DIN
DIN 1946-4:2018-09
En Vigor
2018-09-01
Ventilation and air conditioning - Part 4: Ventilation in buildings and
rooms of health care
DIN
DIN
DIN 19698-5:2018-06
En Vigor
2018-06-01
Characterization of solids - Sampling of solid and semi-solid materials
- Part 5: Guidance for sampling hot-spots of populations
DIN
DIN
DIN
DIN 10502-1:2014-05
En Vigor
2014-05-01
Food hygiene - Containers for liquid, granulated and powdered foodstuffs
- Part 1: Materials and constructive features, evaluation of
suitability, marking, proof of application and identification
DIN
DIN 51894:2012-09
En Vigor
2012-09-01
Gas analysis - Gas chromatographic method for fuel gases/natural gas and
other gas mixtures
DIN
DIN
DIN 1898-2:2007-05
En Vigor
2007-05-01
Taper pin hole drills - Part 2: Pin hole drills with Morse taper shank
DIN
DIN 28050:2009-09
En Vigor
2009-09-01
Equipment and vessels - Allowable working pressure -1,0 bar to +0,5 bar
- Technical delivery conditions
DIN
DIN 58774:2018-07
En Vigor
2018-07-01
Production in optical engineering - Dimensions for punctures of vacuum chucks
DIN
DIN
DIN 6885-3:2021-06
En Vigor
2021-06-01
Drive type fastenings without taper action, parallel keys, keyways - Low
pattern - Part 3: Dimensions, tolerances, mass
DIN
DIN
DIN 20317:2014-02
En Vigor
2014-02-01
Rock drilling - Round thread connections for percussive drilling
equipment - Dimensions, design
DIN
DIN 58621:2011-10
En Vigor
2011-10-01
Respiratory protective devices - Reactorfilters for protection against
radioactive Methyliodide and radioactive particles - Requirements,
testing, marking
DIN
DIN
DIN 885:2021-02
En Vigor
2021-02-01
Side and face milling cutters - Dimensions and technical delivery conditions
DIN
DIN 14800-14:2013-12
En Vigor
2013-12-01
Fire-fighting equipment for fire-fighting and rescue service vehicles -
Part 14: Consumption material chest
DIN
