Normas DIN
Filtrar:
DIN
DIN 263-3:2003-06
En Vigor
2003-06-01
Single- and double-start acme thread with clearance for rail vehicles -
Part 3: Thread gauges; Thread dimensions and permissible wear of thread gauge
DIN
DIN 30745:2014-06
En Vigor
2014-06-01
Radio-frequency identification of waste containers by transponder
technology using frequencies below 135 kHz and 868 MHz; Text in German
and English
DIN
DIN
DIN 87378:2017-11
En Vigor
2017-11-01
Remote control gear with transmission tube for manual operation -
Symbols for schematic drawings
DIN
DIN 2184-2:2003-12
En Vigor
2003-12-01
Taps and cold forming taps - Part 2: Short type; General plan of dimensions
DIN
DIN 51045-3:2009-04
En Vigor
2009-04-01
Determination of linear thermal expansion of solids - Part 3: Testing of
non-fired fine ceramic materials using the dilatometer method
DIN
DIN 51349-3:2009-09
En Vigor
2009-09-01
Testing of Engine Lubricants - Rating of Pistons from engine testing -
Part 3: Diesel engines
DIN
DIN 33872-2:2010-12
En Vigor
2010-12-01
Information technology - Office machines - Method of specifying colour
reproduction with YES/NO criteria - Part 2: Test charts for output
properties - Testing of discriminability of 5 and 16 step colour series,
only on CD-ROM
DIN
DIN
DIN
DIN 19267:2012-08
En Vigor
2012-08-01
pH measurement - Technical buffer solutions, preferably for the
calibration of technical measuring installations
DIN
DIN 51480-1:2011-04
En Vigor
2011-04-01
Electrorheological suspensions - Requirements, testing and application -
Part 1: Basics and field strength independent properties
DIN
DIN
DIN 19583-1:2012-10
En Vigor
2012-10-01
Gully tops 500 × 500 for road gullies, class C 250 and class D 400 -
Part 1: Summary / Note: Applies in conjunction with DIN 1229 (1996-06),
DIN EN 124 (1994-08).
DIN
DIN
DIN 18862-1:2003-08
En Vigor
2003-08-01
Equipment for commercial kitchens - Automatic units for grilling
products; Requirements and testing - Part 1: Meal for short-time roasting
DIN
DIN 4000-128:2011-09
En Vigor
2011-09-01
Tabular layout of article characteristics - Part 128: Bonded abrasive
products with bore or threaded insert
DIN
DIN 6063-1:2011-04
En Vigor
2011-04-01
Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
DIN
DIN 21916-2:2023-09
En Vigor
2023-09-01
Mine plans - Operational safety - Part 2: Fire prevention on the surface
/ Note: DIN 21916-2 (2010-02) remains valid alongside this standard
until 2023-02-01.
DIN
DIN 50455-1:2009-10
En Vigor
2009-10-01
Testing of materials for semiconductor technology - Methods for
characterizing photoresists - Part 1: Determination of coating thickness
with optical methods
DIN
DIN 19571-2:2012-10
En Vigor
2012-10-01
Gully tops 500 × 500 for road gullies, class C 250, curve type - Part 2:
Particulars / Note: Applies in conjunction with DIN 1229 (1996-06), DIN
EN 124 (1994-08).
DIN
DIN 8128-1:2011-05
En Vigor
2011-05-01
Automatic catchweighing instruments - Part 1: Metrological and technical
requirements - Tests (OIML R 51-1:2006 + Erratum 2010)
DIN
DIN 70073:2011-12
En Vigor
2011-12-01
Road vehicles - Steadiness of vehicles with tiltable constructional
systems - Air-suspended semitrailer with rear-dump truck cavity built-up
DIN
DIN 51214:2009-08
En Vigor
2009-08-01
Testing of Steel - Tensile test for round wires using knotted specimens
DIN
DIN
DIN 3568:2014-06
En Vigor
2014-06-01
Clamping plates for the suspension of pipes on I and IPB beams, with
CD-ROM / Note: CD-ROM enclosed
DIN
DIN
DIN 54802-2:2015-07
En Vigor
2015-07-01
Testing of plastics - Determination of plasticizer sorption and rate of
plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part
2: Statical method
DIN
DIN
DIN
DIN 6163:2015-01
En Vigor
2015-01-01
Colours and colour limits for signal lights in railway traffic and in
local public transport / Note: DIN 6163-4 (2011-07) and DIN 6163-5
(2002-02) remain valid alongside this standard until 2016-05-01.
DIN
DIN 43531:2012-06
En Vigor
2012-06-01
Lead-acid batteries - Traction batteries 48 V with cells of dimension
series L in accordance with DIN EN 60254-2 for industrial trucks -
Dimensions, weights, design
DIN
DIN 25201-3:2004-06
En Vigor
2004-06-01
Design guide for railway vehicles and their components - Bolted joints -
Part 3: Design - Electrical application / Note: To be replaced by DIN
25201-3 (2010-03).
DIN
DIN
DIN 25463-2:2014-02
En Vigor
2014-02-01
Calculation of the decay power in nuclear fuels of light water reactors
- Part 2: Mixed-uranium-plutonium oxide (MOX) nuclear fuel for
pressurized water reactors
DIN
DIN 25195:2003-06
En Vigor
2003-06-01
Railway vehicles - Countersunk bolts with double nip with metric ISO
thread - Class C
DIN
DIN 25409-4:2022-04
En Vigor
2022-04-01
Remote handling devices for use behind shielding walls - Part 4:
Mechanical telemanipulators with telescopic design - Requirements and tests
DIN
DIN
DIN
DIN 74313-2:2023-09
En Vigor
2023-09-01
Non-soldering compression fittings - Part 2: Reducers type C and D
