Normas DIN
Filtrar:
DIN
DIN
DIN 65063:1978-09
En Vigor
1978-09-01
Aerospace; soft foam, sheets of asbestos (chrysotil), technical specification
DIN
DIN 46396-2:1986-04
En Vigor
1986-04-01
Containers for use in the manufacture of cables and wires, inner
diameter above 500 mm
DIN
DIN 8452:1962-03
En Vigor
1962-03-01
Industrial trucks; steering turnplates without pivot for hand trucks and trailers
DIN
DIN EN ISO 15106-1:2005-05
En Vigor
2005-05-01
Plastics - Film and sheeting - Determination of water vapour
transmission rate - Part 1: Humidity detection sensor method (ISO
15106-1:2003); German version EN ISO 15106-1:2005
DIN
DIN EN 10253-2/A1:2024-06
En Vigor
2024-06-01
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels
with specific inspection requirements; German and English version EN
10253-2:2021/prA1:2024 / Note: Date of issue 2024-05-03*Intended as an
amendment to DIN EN 10253-2 (2021-11).
DIN
DIN 17122:1978-03
En Vigor
1978-03-01
Steel Conductor Contact Rails for Electric Traction; Technical
Conditions of Delivery
DIN
DIN 44402-14:1971-10
En Vigor
1971-10-01
Measurements of electrical properties of electronic tubes; methods of
measurement of emission current from hot cathodes for high-vacuum
electronic tubes and valves
DIN
DIN 15082-2:1977-12
En Vigor
1977-12-01
Cranes; crane rail wheels with roller bearings, pressed-on gear wheels
DIN
DIN EN ISO 11733:2004-11
En Vigor
2004-11-01
Water quality - Determination of the elimination and biodegradability of
organic compounds in an aqueous medium - Activated sludge simulation
test (ISO 11733:2004); German version EN ISO 11733:2004
DIN
DIN
DIN EN ISO 6860:2006-06
En Vigor
2006-06-01
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006);
German version EN ISO 6860:2006
DIN
DIN
DIN EN ISO 16582:2003-04
En Vigor
2003-04-01
Open end blind rivets with break pull mandrel and protruding head -
Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002); German version EN ISO 16582:2002
DIN
DIN 14-3:1987-02
En Vigor
1987-02-01
ISO-metric screw thread; screw threads below 1 mm diameter; tolerances
DIN
DIN
DIN EN ISO 483:2006-02
En Vigor
2006-02-01
Plastics - Small enclosures for conditioning and testing using aqueous
solutions to maintain the humidity at a constant value (ISO 483:2005);
German version EN ISO 483:2005
DIN
DIN 15019-1:1979-09
En Vigor
1979-09-01
Cranes; Stability for All Cranes Except Non-rail Mounted Mobile Cranes
and Except Floating Cranes
DIN
DIN
DIN EN ISO 21049:2005-11
En Vigor
2005-11-01
Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO
21049:2004); English version EN ISO 21049:2004 / Note: To be replaced by
DIN EN ISO 21049 (2010-03).
DIN
DIN 18889:1956-11
En Vigor
1956-11-01
Coal-fired Water-heater with Storage Boiler, without Pressure for Test
Pressure of 1 Atmosphere; Terms employed, Construction, Quality,
Capacity and Testing
DIN
DIN EN 206-2:2024-09
En Vigor
2024-09-01
Concrete - Specification, performance, production and conformity - Part
2: Conformity assessment and certification; German and English version
prEN 206-2:2024 / Note: Date of issue 2024-08-09*Intended as replacement
for DIN EN 206 (2021-06, t).
DIN
DIN
DIN 5031-1:1982-03
En Vigor
1982-03-01
Optical radiation physics and illuminating engineering; quantities,
symbols and units of radiation physics
DIN
DIN 19242-12:1987-01
En Vigor
1987-01-01
Measurement and control; performance tests on process computer systems;
time measurement; function tested; record-, oriented reading from and
writing to a file (random access)
DIN
DIN 46460-1:1986-05
En Vigor
1986-05-01
Winding wires; round resistance wires, bare; technical terms of delivery
DIN
DIN
DIN
DIN 65099-1:1989-11
En Vigor
1989-11-01
Aerospace; classification of special workshop facilities; survey
DIN
DIN 50508:1977-06
En Vigor
1977-06-01
Chemical analysis of copper and copper alloys; determination of tin as
alloying element, volumetric method
DIN
DIN
DIN
DIN 10809:1988-08
En Vigor
1988-08-01
Analysis of tea; preparation of liquor for use in sensory tests
DIN
DIN 30295-2:1973-05
En Vigor
1973-05-01
Rounded Trapezoidal Threads; Limiting Screw Thread Dimensions and
Allowances; Permissible Deviations and Permissible Wear of Thread Gauges
DIN
DIN EN ISO 10432:2005-07
En Vigor
2005-07-01
Petroleum and natural gas industries - Downhole equipment - Subsurface
safety valve equipment (ISO 10432:2004); English version EN ISO 10432:2004
DIN
DIN 43590-3:1990-04
En Vigor
1990-04-01
Lead-acid batteries; monobloc-batteries for starting internal;
combustion engines; connection terminal and cable socket
DIN
DIN
DIN
DIN EN ISO 6845:2003-06
En Vigor
2003-06-01
Surface active agents - Technical alkane sulfonates - Determination of
the mean relative molecular mass of the alkane monosulfonates and the
alkane monosulfonate content (ISO 6845:1989); German version EN ISO 6845:2003
DIN
DIN 15410:1982-07
En Vigor
1982-07-01
Serial lifting appliances; single and twin sheave bottom blocks for
electric hoists; assembly
