AENOR Logo

Normas DIN

144175 Resultados disponibles

Filtrar:

(109283)
(34892)
DIN

DIN EN IEC 61223-3-7:2023-11
En Vigor
2023-11-01
Evaluation and routine testing in medical imaging departments - Part 3-7: Acceptance and constancy tests – Imaging performance of X-ray equipment for dental cone beam computed tomography (IEC 61223-3-7:2021); German version EN IEC 61223-3-7:2022
DIN

DIN EN 13451-1:2024-10
En Vigor
2024-10-01
Swimming pool equipment - Part 1: General safety requirements and test methods for equipment installed in pools for public use; German version EN 13451-1:2020+A1:2024 / Note: DIN EN 13451-1 (2021-02) remains valid alongside this standard until 2025-02-28.
DIN

DIN CLC/TR 45550:2021-04
En Vigor
2021-04-01
Definitions related to material efficiency; German version CLC/TR 45550:2020
DIN

DIN EN 17855:2024-07
En Vigor
2024-07-01
Foodstuffs - Minimum performance requirements for quantitative measurement of the food allergens milk, egg, peanut, hazelnut, almond, walnut, cashew, pecan nut, brazil nut, pistachio nut, macadamia nut, wheat, lupine, sesame, mustard, soy, celery, fish, molluscs and crustaceans; German version EN 17855:2024
DIN

DIN 48154-2:1959-07
En Vigor
1959-07-01
Power current overhead lines; shackle insulators S, bows
DIN

DIN EN IEC 60152:2023-04
En Vigor
2023-04-01
Designation of phase differences by hour numbers in three-phase AC systems (IEC 60152:2021); German version EN IEC 60152:2021
DIN

DIN EN 1744-7:2012-05
En Vigor
2012-05-01
Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate); German version EN 1744-7:2012
DIN

DIN EN ISO 8167:2021-10
En Vigor
2021-10-01
Resistance welding - Embossed projection welding - Projections for resistance welding (ISO 8167:2021); German version EN ISO 8167:2021
DIN

DIN EN 14620-1:2024-09
En Vigor
2024-09-01
Design and manufacture of site built, vertical, cylindrical, flat-bottomed tank systems for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -196 °C - Part 1: General; German version EN 14620-1:2024
DIN

DIN EN 4056-005:2023-04
En Vigor
2023-04-01
Aerospace series - Cable ties for harnesses - Part 005: Plastic cable ties with metallic locking devices, operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard; German and English version EN 4056-005:2023 / Note: Applies in conjunction with DIN EN 4056-001 (2015-08).
DIN

DIN EN ISO 8504-3:2019-04
En Vigor
2019-04-01
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:2018); German version EN ISO 8504-3:2018
DIN

DIN EN 15857:2010-05
En Vigor
2010-05-01
Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria; German version EN 15857:2010
DIN

DIN EN 12158-1:2022-04
En Vigor
2022-04-01
Builders' hoists for goods - Part 1: Hoists with accessible platforms; German version EN 12158-1:2021
DIN

DIN EN 2665-001:2024-03
En Vigor
2024-03-01
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification; German and English version EN 2665-001:2023
DIN

DIN EN 751-3:2024-03
En Vigor
2024-03-01
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings; German version EN 751-3:2022+A1:2023 / Note: This standard is part of the DVGW body of rules.
DIN

DIN EN ISO 1833-10:2019-10
En Vigor
2019-10-01
Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane) (ISO 1833-10:2019); German version EN ISO 1833-10:2019
DIN

DIN EN 16603-10-04:2022-08
En Vigor
2022-08-01
Space engineering - Space environment; English version EN 16603-10-04:2021
DIN

DIN EN ISO 9241-306:2018-12
En Vigor
2018-12-01
Ergonomics of human-system interaction - Part 306: Field assessment methods for electronic visual displays (ISO 9241-306:2018); German version EN ISO 9241-306:2018
DIN

DIN EN ISO 28927-8:2019-09
En Vigor
2019-09-01
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action (ISO 28927-8:2009 + Amd.1:2015 + Amd.2:2019); German version EN ISO 28927-8:2009 + A1:2015 + A2:2019
DIN

DIN 3372-1:2023-02
En Vigor
2023-02-01
Gas-appliances - Radiant heaters with burners without fan: Stationary heaters for outdoor use and portable heaters for indoor and outdoor use - Part 1: Requirements and tests / Note: Date of issue 2023-01-20*Intended as replacement for DIN 3372-2 (1980-01), DIN 3372-4 (1983-04).
DIN

DIN EN 303363-2:2024-04
En Vigor
2024-04-01
ir Traffic Control Surveillance Radar Sensors – Secondary Surveillance Radar (SSR) - Harmonised Standard for access to radio spectrum - Part 2: Far Field Monitor (FFM) (Endorsement of the English version EN 303 363-2 V1.1.1 (2023-10) as a German standard) / Note: DIN ETS standards collection*Endorsement notice
DIN

DIN EN IEC 62980:2023-11
En Vigor
2023-11-01
Parasitic communication protocol for radio-frequency wireless power transmission (IEC 62980:2022); English version EN IEC 62980:2022
DIN

DIN EN 17472:2024-06
En Vigor
2024-06-01
Sustainability of construction works - Sustainability assessment of civil engineering works - Calculation methods; German version EN 17472:2022
DIN

DIN 75001:1981-03
En Vigor
1981-03-01
Classes of Application for Measuring Devices in Motor Vehicles
DIN

DIN EN 894-4:2010-11
En Vigor
2010-11-01
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators; German version EN 894-4:2010
DIN

DIN EN 1911:2010-12
En Vigor
2010-12-01
Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method; German version EN 1911:2010
DIN

DIN EN 2240-034:2010-09
En Vigor
2010-09-01
Aerospace series - Lamps, incandescent - Part 034: Lamp, code 382 - Product standard; German and English version EN 2240-034:2010 / Note: Applies in conjunction with DIN EN 2756 (2010-09).
DIN

DIN EN 1514-1:2024-10
En Vigor
2024-10-01
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 1514-1:2024
DIN

DIN EN IEC 60118-9:2021-10
En Vigor
2021-10-01
Electroacoustics - Hearing aids - Part 9: Methods of measurement of the performance characteristics of bone conduction hearing aids (IEC 60118-9:2019); German version EN IEC 60118-9:2019 / Note: DIN IEC 60118-9 (1987-06) remains valid alongside this standard until 2022-10-21.
DIN

DIN EN ISO 10140-3:2021-09
En Vigor
2021-09-01
Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2021); German version EN ISO 10140-3:2021
DIN

DIN EN 303105-3:2022-11
En Vigor
2022-11-01
Digital Video Broadcasting (DVB) - Next Generation broadcasting system to Handheld, physical layer specification (DVB-NGH) - Part 3: Hybrid Profile (Endorsement of the English version EN 303 105-3 V1.1.1 (2022-03) as a German standard) / Note: DIN ETS standards collection*Endorsement notice
DIN

DIN EN ISO 20846:2019-12
En Vigor
2019-12-01
Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2019); German version EN ISO 20846:2019
DIN

DIN 53835-3:1981-08
En Vigor
1981-08-01
Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant extension limits
DIN

DIN EN 61249-4-16:2009-12
En Vigor
2009-12-01
Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly (IEC 61249-4-16:2009); German version EN 61249-4-16:2009
DIN

DIN EN 16603-32-01:2022-07
En Vigor
2022-07-01
Space engineering - Fracture control; English version EN 16603-32-01:2021
DIN

DIN EN 13157:2010-07
En Vigor
2010-07-01
Cranes - Safety - Hand powered cranes; German version EN 13157:2004+A1:2009
DIN

DIN EN 1515-4:2022-12
En Vigor
2022-12-01
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU; German version EN 1515-4:2021 + AC:2022
DIN

DIN EN 17501:2022-08
En Vigor
2022-08-01
Non-destructive testing - Thermographic testing - Active thermography with laser excitation; German version EN 17501:2022
DIN

DIN EN ISO 12967-1:2021-04
En Vigor
2021-04-01
Health informatics - Service Architecture (HISA) - Part 1: Enterprise viewpoint (ISO 12967-1:2020); English version EN ISO 12967-1:2020
DIN

DIN EN IEC 61970-452:2024-03
En Vigor
2024-03-01
Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network model profiles (IEC 61970-452:2021); English version EN IEC 61970-452:2021 / Note: DIN EN 61970-452 (2019-09) remains valid alongside this standard until 2024-12-01.