AENOR Logo

Normas DIN

144175 Resultados disponibles

Filtrar:

(109277)
(34898)
DIN

DIN EN ISO 18219-2:2021-09
En Vigor
2021-09-01
Leather - Determination of chlorinated hydrocarbons in leather - Part 2: Chromatographic method for middle-chain chlorinated paraffins (MCCPs) (ISO 18219-2:2021); German version EN ISO 18219-2:2021
 
DIN

DIN EN ISO 18295-1:2017-10
En Vigor
2017-10-01
Customer contact centres - Part 1: Requirements for customer contact centres (ISO 18295-1:2017); German version EN ISO 18295-1:2017
 
DIN

DIN EN ISO 11819-2:2017-10
En Vigor
2017-10-01
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The close-proximity method (ISO 11819-2:2017); German version EN ISO 11819-2:2017
 
DIN

DIN EN ISO 20028-2:2017-07
En Vigor
2017-07-01
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017); German version EN ISO 20028-2:2017
 
DIN

DIN EN ISO 105-Z02:1995-12
En Vigor
1995-12-01
Textiles - Tests for colour fastness - Part Z02: Colour fastness of metals in the dyebath: Iron and copper (ISO 105-Z02:1993); German version EN ISO 105-Z02:1995
 
DIN

DIN EN ISO 1346:2021-07
En Vigor
2021-07-01
Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) - 3-, 4-, 8- and 12-strand ropes (ISO 1346:2021); German version EN ISO 1346:2021
 
DIN

DIN EN ISO 10545-11:1996-09
En Vigor
1996-09-01
Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles (ISO 10545-11:1994); German version EN ISO 10545-11:1996
 
DIN

DIN EN ISO 16014-5:2019-09
En Vigor
2019-09-01
Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019); German version EN ISO 16014-5:2019
 
DIN

DIN 49810-3:1993-04
En Vigor
1993-04-01
General lighting service lamps; rough service lamps
 
DIN

DIN EN ISO 17700:2020-01
En Vigor
2020-01-01
Footwear - Test methods for upper components and insocks - Colour fastness to rubbing and bleeding (ISO 17700:2019); German version EN ISO 17700:2019
 
DIN

DIN EN ISO 19063-1:2016-05
En Vigor
2016-05-01
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19063-1:2015); German version EN ISO 19063-1:2015
 
DIN

DIN EN ISO 22818:2021-06
En Vigor
2021-06-01
Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (ISO 22818:2021); German version EN ISO 22818:2021
 
DIN

DIN 51871:1985-12
En Vigor
1985-12-01
Testing of gaseous fuels and other technical gases; determination of dew point of water vapour; method of means of cooled mirror
 
DIN

DIN EN ISO 15957:2015-08
En Vigor
2015-08-01
Test dusts for evaluating air cleaning equipment (ISO 15957:2015); German version EN ISO 15957:2015
 
DIN

DIN EN ISO 15156-2:2025-02
En Vigor
2025-02-01
Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons (ISO 15156-2:2020); German version EN ISO 15156-2:2020
 
DIN

DIN 72781-2:1996-03
En Vigor
1996-03-01
Wiper systems for road vehicles - Part 2: Wiper motors; concepts, requirements, tests
 
DIN

DIN 24500-2:1971-04
En Vigor
1971-04-01
Rolling mill equipment; rolling mills for steel, designation for rolling mill furnaces
 
DIN

DIN EN 1997-1:2022-10
En Vigor
2022-10-01
Eurocode 7: Geotechnical design - Part 1: General rules; English version prEN 1997-1:2022 / Note: Date of issue 2022-09-16*Intended as replacement for DIN EN 1997-1 (2014-03).
 
DIN

DIN EN ISO 7500-1:2018-06
En Vigor
2018-06-01
Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018); German version EN ISO 7500-1:2018
 
DIN

DIN EN ISO 15858:2017-01
En Vigor
2017-01-01
UV-C Devices - Safety information - Permissible human exposure (ISO 15858:2016); German version EN ISO 15858:2016 / Note: To be replaced by DIN EN ISO 15858 (2024-04).
 
DIN

DIN EN ISO 17658:2015-08
En Vigor
2015-08-01
Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology (ISO 17658:2002); Trilingual version EN ISO 17658:2015
 
DIN

DIN EN ISO 10318-2:2018-10
En Vigor
2018-10-01
Geosynthetics - Part 2: Symbols and pictograms (ISO 10318-2:2015 + Amd 1:2018); Trilingual version EN ISO 10318-2:2015 + A1:2018
 
DIN

DIN 561:1995-02
En Vigor
1995-02-01
Hexagon head set screws with small hexagon and full dog point
 
DIN

DIN EN ISO 5395-1:2018-08
En Vigor
2018-08-01
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013 + Amd 1:2017); German version EN ISO 5395-1:2013 + A1:2018
 
DIN

DIN EN ISO 21416:2019-12
En Vigor
2019-12-01
Recreational diving services - Requirements and guidance on environmentally sustainable practices in recreational diving (ISO 21416:2019); German version EN ISO 21416:2019
 
DIN

DIN EN ISO 10685-2:2016-11
En Vigor
2016-11-01
Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 2: Commercial information (ISO 10685-2:2016, Corrected version 2016-05-15); German version EN ISO 10685-2:2016
 
DIN

DIN EN IEC 61300-3-3:2024-04
En Vigor
2024-04-01
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss (IEC 86B/4759/CDV:2023); German and English version prEN IEC 61300-3-3:2023 / Note: Date of issue 2024-03-15*Intended as replacement for DIN EN 61300-3-3 (2009-12).
 
DIN

DIN EN ISO 11357-4:2021-05
En Vigor
2021-05-01
Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021); German version EN ISO 11357-4:2021
 
DIN

DIN EN IEC 61223-3-8:2023-06
En Vigor
2023-06-01
Evaluation and routine testing in medical imaging departments - Part 3-8: Acceptance and constancy tests - Radiography and radioscopy (IEC/CDV 61223-3-8:2022); German and English version prEN IEC 61223-3-8:2022 / Note: Date of issue 2023-05-19
 
DIN

DIN EN ISO 3451-1:2019-05
En Vigor
2019-05-01
Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2019); German version EN ISO 3451-1:2019
 
DIN

DIN EN ISO 27830:2018-03
En Vigor
2018-03-01
Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017); German version EN ISO 27830:2017
 
DIN

DIN EN 15543:2024-01
En Vigor
2024-01-01
Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids; German and English version prEN 15543:2023 / Note: Date of issue 2023-12-08*Intended as replacement for DIN EN 15543 (2009-09).
 
DIN

DIN EN ISO 21007-2:2016-06
En Vigor
2016-06-01
Gas cylinders - Identification and marking using radio frequency identification technology - Part 2: Numbering schemes for radio frequency identification (ISO 21007-2:2015); German version EN ISO 21007-2:2015
 
DIN

DIN EN ISO 1833-15:2020-03
En Vigor
2020-03-01
Textiles - Quantitative chemical analysis - Part 15: Mixtures of jute with certain animal fibres (method by determining nitrogen content) (ISO 1833-15:2019); German version EN ISO 1833-15:2019
 
DIN

DIN EN ISO 23125 Berichtigung 1:2016-08
En Vigor
2016-08-01
Machine tools - Safety - Turning machines (ISO 23125:2015); German version EN ISO 23125:2015, Corrigendum to DIN EN ISO 23125:2015-04 / Note: To be replaced by DIN EN ISO 23125-1 (2023-12).
 
DIN

DIN EN ISO 18273:2016-05
En Vigor
2016-05-01
Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2015); German version EN ISO 18273:2015
 
DIN

DIN EN ISO 21268-2:2020-09
En Vigor
2020-09-01
Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like material - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter (ISO 21268-2:2019); German version EN ISO 21268-2:2019
 
DIN

DIN EN ISO 1974:2012-09
En Vigor
2012-09-01
Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012); German version EN ISO 1974:2012
 
DIN

DIN EN ISO 17777:2016-11
En Vigor
2016-11-01
Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification (ISO 17777:2016); German version EN ISO 17777:2016
 
DIN

DIN EN ISO 10218-1:2012-01
En Vigor
2012-01-01
Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011); German version EN ISO 10218-1:2011 / Note: To be replaced by DIN EN ISO 10218-1 (2020-04), DIN EN ISO 10218-1 (2021-09).