AENOR Logo

Normas DIN

144175 Resultados disponibles

Filtrar:

(109277)
(34898)
DIN

DIN EN 60512-13-5:2006-11

En Vigor
2006-11-01
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006); German version EN 60512-13-5:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this standard until 2009-03-01.
 
DIN

DIN EN 16272-2:2024-02

En Vigor
2024-02-01
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics - Airborne sound insulation under diffuse sound field conditions; German version EN 16272-2:2023
 
DIN

DIN EN 61169-14:2011-10

En Vigor
2011-10-01
Radio-frequency connectors - Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling - Characteristic impedance 75 ohms (Type 3,5/12) (IEC 61169-14:2010); German version EN 61169-14:2010
 
DIN

DIN EN 9223-105:2018-08

En Vigor
2018-08-01
Programme Management - Configuration Management - Part 105: Glossary; German and English version EN 9223-105:2018
 
DIN

DIN EN IEC 62541-10:2021-08

En Vigor
2021-08-01
OPC Unified Architecture - Part 10: Programs (IEC 62541-10:2020); English version EN IEC 62541-10:2020 / Note: DIN EN 62541-10 (2015-11) remains valid alongside this standard until 2023-08-11.
 
DIN

DIN EN 1991-2/NA:2012-08

En Vigor
2012-08-01
National Annex - Nationally determined parameters - Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges / Note: Applies in conjunction with DIN EN 1991-2 (2010-12).
 
DIN

DIN EN 15625:2021-04

En Vigor
2021-04-01
Railway applications - Braking - Automatic variable load sensing devices; German version EN 15625:2021
 
DIN

DIN EN 9300-007:2017-12

En Vigor
2017-12-01
Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and References; German and English version EN 9300-007:2017 / Note: To be replaced by DIN EN 9300-007 (2023-08).
 
DIN

DIN 8326-1:1988-06

En Vigor
1988-06-01
Quartz wrist watches; requirements, testing, marking
 
DIN

DIN EN 10025-6:2023-06

En Vigor
2023-06-01
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition; German version EN 10025-6:2019+A1:2022
 
DIN

DIN EN 975-2:2004-09

En Vigor
2004-09-01
Sawn timber - Appearance grading of hardwoods - Part 2: Poplars; German version EN 975-2:2004
 
DIN

DIN EN 4660-001:2011-07

En Vigor
2011-07-01
Aerospace series - Modular and Open Avionics Architectures - Part 001: Architecture; German and English version EN 4660-001:2011
 
DIN

DIN EN ISO 3521:1999-10

En Vigor
1999-10-01
Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997); German version EN ISO 3521:1999
 
DIN

DIN 31631-4:1987-05

En Vigor
1987-05-01
Data element catalogue for bibliographic data; codes for entries for data categories
 
DIN

DIN EN 60512-15-3:2009-03

En Vigor
2009-03-01
Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) (IEC 60512-15-3:2008); German version EN 60512-15-3:2008 / Note: DIN IEC 60512-8 (1994-05) remains valid alongside this standard until 2011-07-01.
 
DIN

DIN EN 14848:2020-03

En Vigor
2020-03-01
Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups; German version EN 14848:2020
 
DIN

DIN EN 573-3:2024-03

En Vigor
2024-03-01
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products; German version EN 573-3:2019+A2:2023
 
DIN

DIN EN 9162:2018-10

En Vigor
2018-10-01
Aerospace series - Aerospace Operator Self-Verification Programs; German and English version EN 9162:2018
 
DIN

DIN EN 407:2020-06

En Vigor
2020-06-01
Protective gloves and other hand protective equipments against thermal risks (heat and/or fire); German version EN 407:2020 / Note: Applies in conjunction with DIN EN ISO 21420 (2020-06).*To be amended by DIN EN 407/A1 (2022-02).
 
DIN

DIN EN 50708-2-6:2024-05

En Vigor
2024-05-01
Power transformers - Additional European requirements - Part 2-6: Medium power transformers - Non-conventional magnetic steel technology; German version EN 50708-2-6:2022 / Note: Applies in conjunction with DIN EN 50708-1-1 (2024-04).
 
DIN

DIN EN 14521:2004-09

En Vigor
2004-09-01
Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer; German version EN 14521:2004
 
DIN

DIN EN ISO 15880:2004-09

En Vigor
2004-09-01
Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000); German version EN ISO 15880:2004
 
DIN

DIN IEC 60413:1980-10

En Vigor
1980-10-01
Test procedures for determining physical properties of brush materials for electrical machines / Note: To be replaced by DIN EN IEC 60413 (2024-09).
 
DIN

DIN EN 16102:2012-03

En Vigor
2012-03-01
Intelligent transport systems - eCall - Operating requirements for third party support; German version EN 16102:2011
 
DIN

DIN EN 4122:2018-07

En Vigor
2018-07-01
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1 100 MPa (at ambient temperature) / 650 °C; German and English version EN 4122:2018
 
DIN

DIN EN 17425:2021-08

En Vigor
2021-08-01
Foodstuffs - Determination of ergot alkaloids in cereals and cereal products by dSPE clean-up and HPLC-MS/MS; German version EN 17425:2021
 
DIN

DIN EN IEC 60747-16-7:2024-04

En Vigor
2024-04-01
Semiconductor devices - Part 16-7: Microwave integrated circuits - Attenuators (IEC 60747-16-7:2022); German version EN IEC 60747-16-7:2023
 
DIN

DIN EN ISO 105-Z09:1997-12

En Vigor
1997-12-01
Textiles - Tests for colour fastness - Part Z09: Determination of cold water solubility of water-soluble dyes (ISO 105-Z09:1995); German version EN ISO 105-Z09:1997
 
DIN

DIN EN 166:2002-04

En Vigor
2002-04-01
Personal eye-protection - Specifications; German version EN 166:2001 / Note: To be replaced by DIN EN 166 (2007-10).
 
DIN

DIN EN 17265:2019-11

En Vigor
2019-11-01
Foodstuffs - Determination of elements and their chemical species - Determination of aluminium by inductively coupled plasma optical emission spectometry (ICP-OES); German version EN 17265:2019
 
DIN

DIN EN 12206-1:2021-07

En Vigor
2021-07-01
Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder; German version EN 12206-1:2021
 
DIN

DIN EN 1863-1:2012-02

En Vigor
2012-02-01
Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description; German version 1863-1:2011 / Note: To be amended by DIN EN 1863-1/A1 (2015-03).
 
DIN

DIN EN 2349-312:2007-05

En Vigor
2007-05-01
Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life - Mixed load; German and English version EN 2349-312:2006
 
DIN

DIN EN 16582-2:2015-11

En Vigor
2015-11-01
Domestic swimming pools - Part 2: Specific requirements including safety and test methods for inground pools; German version EN 16582-2:2015 / Note: Applies in conjunction with DIN EN 16582-1 (2015-11).
 
DIN

DIN EN 13617-3:2021-11

En Vigor
2021-11-01
Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves; German version EN 13617-3:2021
 
DIN

DIN EN 16842-3:2019-06

En Vigor
2019-06-01
Powered industrial trucks - Visibility - Test methods and verification - Part 3: Reach trucks up to and including 10000 kg capacity; German version EN 16842-3:2018 / Note: Applies in conjunction with DIN EN 16842-1 (2018-10).
 
DIN

DIN EN IEC 61158-6-21:2020-08

En Vigor
2020-08-01
Industrial communication networks - Fieldbus specifications - Part 6-21: Application layer protocol specification - Type 21 elements (IEC 61158-6-21:2019); English version EN IEC 61158-6-21:2019, only on CD-ROM / Note: CD-ROM*DIN EN 61158-6-21 (2013-03) remains valid alongside this standard until 2022-07-25.
 
DIN

DIN EN 9300-002:2018-10

En Vigor
2018-10-01
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 002: Requirements; German and English version EN 9300-002:2018
 
DIN

DIN EN 689:2020-01

En Vigor
2020-01-01
Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values; German version EN 689:2018+AC:2019
 
DIN

DIN EN 13523-5:2014-08

En Vigor
2014-08-01
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test); German version EN 13523-5:2014