Para búsqueda de normas ISO, ASTM, IEC, IEEE, BSI, DIN , SAE, AFNOR y EN utilizar términos en inglés. Para AFNOR también se pueden usar terminos en francés
Limpiar filtros Aplicar
Resultados para:
Número de resultados: 2.539
EN ISO 10993-17:2023 CEN
Estado: PUBLISHED / 2023-11-22
Biological evaluation of medical devices - Part 17: Toxicological risk assessment of medical device constituents (ISO 10993-17:2023)
EN ISO 19160-2:2023 CEN
Addressing - Part 2: Assigning and maintaining addresses for objects in the physical world (ISO 19160-2:2023)
EN 1996-3:2023 CEN
Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
EN 1992-1-1:2023 CEN
Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures
EN ISO 15614-13:2023 CEN
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2023)
EN 1992-1-2:2023 CEN
Eurocode 2 - Design of concrete structures – Part 1-2: Structural fire design
CEN/TR 18010:2023 CEN
Estado: PUBLISHED / 2023-11-15
Chemical disinfectants and antiseptics - Information on the preparation of spores and determination/exclusion of sporistatical activity
CEN/TR 16395:2023 CEN
Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document
EN 4881:2023 CEN
Aerospace series - Micro-arc oxidation of aluminium and aluminium alloys
EN 1417:2023 CEN
Plastics and rubber machines - Two-roll mills - Safety requirements
CEN/TS 17977:2023 CEN
Gas infrastructure - Quality of gas - Hydrogen used in rededicated gas systems
CEN/TS 15518-4:2023 CEN
Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment
EN 17839:2023 CEN
Estado: PUBLISHED / 2023-11-08
Glass in building - Glazing and airborne sound insulation - Validation procedure for calculation tools
EN ISO 21549-5:2023 CEN
Health informatics - Patient healthcard data - Part 5: Identification data (ISO 21549-5:2023)
EN ISO 26443:2023 CEN
Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2023)
EN ISO 19905-1:2023 CEN
Oil and gas industries including lower carbon energy - Site-specific assessment of mobile offshore units - Part 1: Jack-ups: elevated at a site (ISO 19905-1:2023)
EN ISO 14919:2023 CEN
Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and technical supply conditions (ISO 14919:2023)
CWA 17938:2023 CEN
Guideline for introducing and implementing real-time instrumental-based tools for biomechanical risk assessment
EN 10278:2023 CEN
Dimensions and tolerances of bright steel products of stainless and other special steels
EN ISO 3506-5:2023 CEN
Estado: PUBLISHED / 2023-11-01
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications (ISO 3506-5:2022)
EN 17670-2:2023 CEN
Plastics piping systems for non-pressure underground conveyance of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specification for road gullies
EN ISO 11855-5:2021/A1:2023 CEN
Building environment design - Embedded radiant heating and cooling systems - Part 5: Installation - Amendment 1 (ISO 11855-5:2021/Amd 1:2023)
EN 13697:2023 CEN
Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and yeasticidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas without mechanical action - Test method and requirements without mechanical action (phase 2, step 2)
EN ISO/IEC 18045:2023 CEN
Information security, cybersecurity and privacy protection - Evaluation criteria for IT security - Methodology for IT security evaluation (ISO/IEC 18045:2022)
CEN/TS 1566-2:2023 CEN
Estado: PUBLISHED / 2023-10-18
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity
EN 13523-23:2023 CEN
Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
EN 13049:2023 CEN
Windows and doors - Soft and heavy body impact - Test method, safety requirements and classification
EN 16906:2023 CEN
Liquid petroleum products - Determination of the ignition quality of diesel fuels - Fixed compression ratio engine method
CEN/TS 17405:2020 CEN
Estado: PUBLISHED / 2023-10-15
Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
CEN/TS 17006:2016 CEN
Earthworks - Continuous Compaction Control (CCC)
CEN/TR 614-3:2010 CEN
Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery
EN 45545-2:2020+A1:2023 CEN
Estado: PUBLISHED / 2023-10-11
Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
EN 1407:2023 CEN
Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides
EN 1405:2023 CEN
Chemicals used for treatment of water intended for human consumption - Sodium alginate
EN ISO 4545-1:2023 CEN
Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2023)
EN 12608-2:2023 CEN
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 2: PVC-U profiles covered with foils bonded with adhesives
EN 1409:2023 CEN
Chemicals used for water treatment intended for human consumption - Polyamines
EN 1408:2023 CEN
Chemicals used for treatment of water intended for human consumption - Poly(diallyldimethylammonium chloride)
EN 1410:2023 CEN
Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides
CEN/TS 16660:2015 CEN
Estado: PUBLISHED / 2023-10-09
Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity
CEN/TS 16182:2012 CEN
Sludge treated biowaste and soil - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates using gas chromatography with mass selective detection (GC-MS)
EN ISO 683-17:2023 CEN
Estado: PUBLISHED / 2023-10-04
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2023)
EN ISO 1833-4:2023 CEN
Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite) (ISO 1833-4:2023)
EN ISO 61:2023 CEN
Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:2023)
EN ISO 5754:2023 CEN
Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2023)
EN ISO 3887:2023 CEN
Steels - Determination of the depth of decarburization (ISO 3887:2023)
EN ISO 11855-1:2021/A1:2023 CEN
Building environment design - Embedded radiant heating and cooling systems - Part 1: Definitions, symbols, and comfort criteria - Amendment 1 (ISO 11855-1:2021/Amd 1:2023)
EN ISO 52016-3:2023 CEN
Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 3: Calculation procedures regarding adaptive building envelope elements (ISO 52016-3:2023)
CEN/TS 1451-2:2019 CEN
Estado: PUBLISHED / 2023-09-28
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
EN ISO 25119-1:2023 CEN
Estado: PUBLISHED / 2023-09-27
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2018)
Número de resultados: 2539
Lo más vendido
UNE-EN ISO 9001:2015
Sistemas de gestión de la calidad. Requisitos
120€
Comprar
UNE-EN ISO 14001:2015
Sistemas de gestión ambiental. Requisitos con orientación para su uso
UNE 19601:2017
Sistemas de gestión de compliance penal. Requisitos con orientación para su uso
99€
ISO 45001:2018
Occupational health and safety management systems -- Requirements with guidance for use
173,6€
UNE-EN ISO/IEC 17025:2017
Requisitos generales para la competencia de los laboratorios de ensayo y calibración.
UNE-EN ISO 19650-1:2019
Organización y digitalización de la información en obras de edificación e ingeniería civil que utilizan BIM (Building Information Modelling). Gestión de la información al utilizar BIM (Building Information Modelling). Parte 1: Conceptos y principios.
83€
Guía para la aplicación de ISO 45001:2018
Un libro práctico y ameno para guiar a cualquier organización en la implantación de su propio sistema de gestión de la seguridad y salud en el trabajo, siguiendo las directrices de la norma ISO 45001:2018.
85€
Guía práctica para la integración de sistemas de gestión. ISO 9001, ISO 14001 e ISO 45001
Este libro descubre las claves para crear y desarrollar con éxito un plan de integración entre los sistemas de gestión ISO 9001, ISO 14001 e ISO 45001.
40€
Orientaciones para la evaluación de riesgos y las reglas de decisión según la Norma UNE-EN ISO/IEC 17025:2017
Este libro aporta ejemplos y alternativas para el cumplimiento de dos de los nuevos requisitos de la Norma UNE-EN ISO/IEC 17025:2017 aplicados a laboratorios.
30€
Clasificación Decimal Universal (CDU) abreviada. Edición 2016
La CDU abreviada surge con el objetivo de facilitar las tareas de clasificación bibliográfica tanto en la enseñanza como en el ámbito profesional
35€
Guía para la aplicación de UNE-ISO 31000:2018
Esta guía facilita la comprensión y aplicación de la norma UNE-ISO 31000:2018, reproduciendo su contenido con explicaciones y ejemplos prácticos.
70€
Cómo implantar un SGSI según UNE-EN ISO/IEC 27001 y su aplicación en el Esquema Nacional de Seguridad. Edición 2018
Ofrece al lector una descripción de los conceptos y requisitos para la implantación efectiva de un Sistema de Gestión de Seguridad de la Información (SGSI).
28,9€