Normas AFNOR
Filtrar:
AFNOR
NF ETS 300719-1
In Force
1999-09-01
Radio Equipment and Systems (RES). Private wide area paging service.
Part 1 : technical characteristics for private wide-area paging systems.
AFNOR
NF EN 14227-3
In Force
2013-08-31
Hydraulically bound mixtures - Secifications - Part 3 : fly ash bound
granular mixtures
AFNOR
AFNOR
NF EN 301790
In Force
2010-03-01
Digital Video Broadcasting (DVB) - Interaction channel for satellite
distribution systems (V1.5.1)
AFNOR
NF EN ISO 7886-1
In Force
2018-03-28
Sterile hypodermic syringes for single use - Part 1 : syringes for
manual use
AFNOR
NF EN ISO 4210-6
In Force
2018-04-28
Cycles - Safety requirements for bicycles - Part 6 : frame and fork test methods
AFNOR
NF ISO 13218
In Force
1999-10-01
Road vehicles - Child restraint systems - Report form for accidents
involving child passengers
AFNOR
NF EN ISO 8253-1
In Force
2011-01-01
Acoustics - Audiometric test methods - Part 1 : pure-tone air and bone
conduction audiometry
AFNOR
NF EN ISO 11073-10418
In Force
2014-04-26
Health informatics - Personal health device communication - Part 10418 :
device specialization - International normalized ratio (INR) monitor
AFNOR
AFNOR
NF EN 12312-13
In Force
2017-10-27
Aircraft ground support equipment - Specific requirements - Part 13 :
lavatory service equipment
AFNOR
AFNOR
NF ISO 9335
In Force
2013-01-12
Optics and photonics - Optical transfer function - Principles and
procedures of measurementt
AFNOR
NF EN 10297-1
In Force
2003-09-01
Seamless circular steel tubes for mechanical and general engineering
purposes - Technical delivery conditions - Part 1 : non-alloy and alloy
steel tubes
AFNOR
NF EN 16329
Cancelled
2022-12-30
Diesel and domestic heating fuels - Determination of cold filter
plugging point - Linear cooling bath method
AFNOR
AFNOR
NF EN ISO 5114-1
In Force
2024-06-19
Acoustics - Determination of uncertainties associated with sound
emission measures - Part 1 : sound power levels determined from sound
pressure measurements
AFNOR
NF EN 10339
In Force
2007-04-01
Steel tubes for onshore and offshore water pipelines - Internal liquid
applied epoxy linings for corrosion protection
AFNOR
NF ISO 8300
Cancelled
2014-03-19
Determination of plutonium content in plutonium dioxide (PuO2) of
nuclear grade quality. Gravimetric method.
AFNOR
NF EN ISO 787-13
In Force
2019-09-25
General methods of test for pigments and extenders - Part 13 :
determination of water-soluble sulphates, chlorides and nitrates
AFNOR
NF EN 16309/IN1
In Force
2014-11-08
Sustainability of construction works - Assessment of social performance
of buildings - Calculation methodology
AFNOR
NF ISO 14152
In Force
2002-09-01
Neutron radiation protection shielding - Design principles and
considerations for the choice of appropriate materials
AFNOR
AFNOR
NF EN 1852-1/IN1
In Force
2022-10-05
Plastics piping systems for non-pressure underground drainage and
sewerage - Polypropylene (PP) - Part 1 : specifications for pipes,
fittings and the system
AFNOR
NF EN ISO 27627
In Force
2014-04-16
Petroleum and natural gas industries - Aluminium alloy drill pipe thread
connection gauging
AFNOR
NF EN ISO 1307
In Force
2008-08-01
Rubber and plastics hoses - Hose sizes, minimum and maximum inside
diameters, and tolerances on cut-to-length hoses
AFNOR
FD P18-541
In Force
2023-05-24
Aggregates - Guide for the drafting of the quarry specification for the
purposes of the prevention of deleterious effects of alkali-aggregate reactions
AFNOR
NF EN 62135-1
In Force
2016-04-09
Resistance welding equipment - Part 1 : safety requirements for the
design, manufacture and the installation
AFNOR
FD P05-101
In Force
2003-09-01
Guide for the preparation of monitoring and maintenance instructions for
dwellings or offices in collective buildings
AFNOR
NF EN ISO 15791-1
In Force
2014-02-22
Plastics - Development and use of intermediate-scale fire tests for
plastics products - Part 1 : general guidance
AFNOR
NF EN 15037-5
In Force
2013-09-14
Precast concrete products - Beam-and-block floor systems - Part 5 :
lightweight blocks for simple formwork
AFNOR
NF EN 15804+A2
In Force
2019-10-30
Sustainability of construction works - Environmental product
declarations - Core rules for the product category of construction products
AFNOR
AFNOR
NF EN ISO 20557-1
In Force
2018-07-11
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials
- Part 1 : designation system and basis for specifications
AFNOR
NF EN 1993-1-1/A1
In Force
2014-07-25
Eurocode 3 : design of steel structures - Part 1-1 : general rules and
rules for buildings
AFNOR
AFNOR
NF P31-201-1/A1
In Force
1996-12-01
DTU 40-22. Building works. Roof-covering made from hollow terracotta
tiles. Part 1 : technical specifications.
AFNOR
NF EN ISO 3596
In Force
2001-12-01
Animal and vegetable fats and oils - Determination of unsaponifiable
matter - Method using diethyl ether extraction
AFNOR
NF EN 14652/IN1
In Force
2007-09-01
Water conditioning equipment inside buildings - Membrane separation
devices - Requirements for performance, safety and testing
AFNOR
AFNOR
NF EN ISO 16931
In Force
2009-08-01
Animal and vegetable fats and oils - Determination of polymerized
triacylglycerols by high-performance size-exclusion chromatography (HPSEC)
AFNOR
NF EN 14279/IN1
In Force
2009-05-01
Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
AFNOR
NF P52-302
In Force
1993-05-01
DTU 65-7. Building works. Execution of floor heating through electric
cables set in concrete. Part 1 : technical specifications - Part 2 :
special clauses
AFNOR
NF EN 1993-1-12
In Force
2007-08-01
Eurocode 3 - Design of steel structures - Part 1-12 : additional rules
for the extension of EN 1993 up to steel grades S 700
AFNOR
NF EN 13763-4
In Force
2004-03-01
Explosives for civil uses - Detonators and relays - Part 4 :
determination of resistance to abrasion of leading wires and shock tubes
AFNOR
NF EN IEC 60900
In Force
2018-08-24
Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c
AFNOR
NF EN 13126-7
In Force
2021-03-31
Building hardware - Hardware for windows and door height windows -
Requirements and test methods - Part 7 : finger catches
AFNOR
NF EN ISO 17624
In Force
2005-06-01
Acoustics - Guidelines for noise control in offices and workrooms by
means of acoustical screens
AFNOR
AFNOR
NF EN 14319-2
In Force
2013-04-27
Thermal insulating products for building equipment and industrial
installations - In-situ formed dispensed rigid polyurethane (PUR) and
polyisocyanurate foam (PIR) products - Part 2 : specification for the
installed insulation products
AFNOR
NF P43-015
Cancelled
2023-04-12
Valves and taps water supply in buildings. Draw off taps. General
technical specifications.
AFNOR
NF ISO 11497
In Force
1998-11-01
Telemark skis and bindings. Binding mounting area. Requirements and test methods.
AFNOR
NF EN 13541
In Force
2012-06-01
Glass in building - Security glazing - Testing and classification of
resistance against explosion pressure
AFNOR
NF EN 60454-3-12
In Force
2006-07-01
Pressure-sensitive adhesive tapes for electrical purposes - Part 3 :
specifications for individual materials - Sheet 12 : requirements for
polyethylene and polypropylene film tapes with pressure sensitive adhesives
AFNOR
NF EN 16297-3
In Force
2012-11-01
Pumps - Rotodynamic pumps - Glandless circulators - Part 3 : energy
efficiency index (EEI) for circulators integrated in products
AFNOR
AFNOR
NF EN 13865
In Force
2017-06-03
Surfaces for sports areas - Determination of angled ball behaviour - Tennis
AFNOR
NF DTU 51.11 P2
Cancelled
2024-05-01
Parquet flooring and wood-faced inlaid floor coverings - Laying of
floating parquet flooring and wood-faced inlaid floor coverings - Part 2
: contract bill of special clauses
AFNOR
NF EN 301091-2
In Force
2009-07-01
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short
Range Devices - Road Transport and Traffic Telematics (RTTT) - Radar
equipment operating in the 76 GHz to 77 GHz range - Part 2 : harmonised
EN covering essential requirements of article 3.2 of the R&TTE
Directive (V1.3.2)
AFNOR
NF EN 15101-2
In Force
2013-10-25
Thermal insulation products for buildings - In-situ formed loose fill
cellulose (LFCI) products - Part 2 : specification for the installed products
