Normas AFNOR
Filtrar:
AFNOR
NF ISO 6133
In Force
2015-12-04
Rubber and plastics - Analysis of multi-peak traces obtained in
determinations of tear strength and adhesion strength
AFNOR
NF EN IEC 61918/A1
In Force
2022-04-15
Industrial communication networks - Installation of communication
networks in industrial premises
AFNOR
AFNOR
XP P94-065
In Force
2023-11-15
Soils - investigation and testing - Hole Erosion Test - Principle and
laboratory test method for the determination of concentrated leak
erosion resistance
AFNOR
NF EN ISO 17892-8
In Force
2018-03-21
Geotechnical investigation and testing - Laboratory testing of soil -
Part 8 : unconsolidated undrained triaxial test
AFNOR
NF EN 50131-2-7-1/A2
In Force
2016-09-24
Alarm systems - Intrusion and hold-up systems - Part 2-7-1 : intrusion
detectors - Glass break detectors (acoustic)
AFNOR
NF EN ISO 13254
In Force
2017-10-18
Thermoplastics piping systems for non-pressure applications - Test
method for watertightness
AFNOR
NF EN 1463-1
In Force
2021-12-22
Road marking materials - Retroreflecting road studs - Part 1 : initial
performance requirements
AFNOR
NF EN 60146-2
In Force
2002-12-01
Semiconductor converters - Part 2 : self-commutated semiconductor
converters including direct d.c. converters
AFNOR
NF P99-254
In Force
2014-05-16
Road equipment - Emergency call network. Installation of emergency
roadside telephones and central control stations
AFNOR
NF EN 62920/A11
In Force
2020-05-22
Photovoltaic power generating systems - EMC requirements and test
methods for power conversion equipment
AFNOR
NF S31-110
Cancelled
2005-11-05
Acoustics. Description and measurement of environmental noise. Basic
quantities and general evaluation methods.
AFNOR
NF EN ISO 8254-2
In Force
2016-11-12
Paper and board - Measurement of specular gloss - Part 2 : 75 degree
gloss with a parallel beam, DIN method
AFNOR
NF EN 60061-1/A63
In Force
2022-07-22
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 1 : lamp caps
AFNOR
NF EN 60704-3
Cancelled
2013-01-26
Test code for the determination of airborne acoustical noise emitted by
household and similar electrical appliances. Part 3 : procedure for
determining and verifying declared noise emission values.
AFNOR
NF EN 60715
In Force
2017-11-24
Dimensions of low-voltage switchgear and controlgear - Standardized
mounting on rails for mechanical support of switchgear, controlgear and accessories
AFNOR
NF P23-309
In Force
2020-07-10
Composite timber and aluminum joinery - Technical specifications for
windows, French windows, external doors and frame sets
AFNOR
NF EN 62885-3
In Force
2015-04-17
Surface cleaning appliances - Part 3 : wet carpet cleaning appliances -
Methods for measuring the performance
AFNOR
NF EN 13138-1
In Force
2021-10-20
Buoyant aids for swimming instruction - Part 1 : safety requirements and
test methods for buoyant aids to be worn
AFNOR
NF DTU 60.32 P1-2
In Force
2007-11-01
Building works - Unplasticized polyvinyl chloride piping installation -
Rainwater downpipes - Part 1-2 : general criteria for selection of materials
AFNOR
NF EN 1264-1
Cancelled
2011-09-30
Floor heating. Systems and components. Part 1 : definitions and symbols.
AFNOR
NF EN IEC 61223-3-6
In Force
2020-04-03
Evaluation and routine testing in medical imaging departments - Part 3-6
: acceptance and constancy tests - Imaging performance of mammographic
X-ray equipment used in a mammographic tomosynthesis mode of operation
AFNOR
NF DTU 25.31 P1-2
In Force
2017-04-22
DTU 25.31 - Building works - Works plaster tiles - Part 1-2 : general
criteria for selection of materials
AFNOR
NF EN ISO 20126
In Force
2022-03-23
Dentistry - Manual toothbrushes - General requirements and test methods
AFNOR
NF EN 1748-1-2
In Force
2005-02-01
Glass in building - Special basic products - Borosilicate glass - Part
1-2 : evaluation of conformity/product standard
AFNOR
NF EN 13796-1
In Force
2017-05-12
Safety requirements for cableway installations designed to carry persons
- Carriers - Part 1 : grips, carrier trucks, on-board brakes, cabins,
chairs, carriages, maintenance carriers, tow-hangers
AFNOR
NF EN 61000-4-10
Cancelled
2020-04-11
Electromagnetic compatibility (emc). Part 4 : testing and measurement
techniques. Section 10 : damped oscillatory magnetic field immunity
test. Basis EMC publication.
AFNOR
NF EN 455-1/IN2
In Force
2024-09-18
Medical gloves for single use - Part 1 : requirements and testing for
freedom of holes
AFNOR
AFNOR
NF EN IEC 60384-13
In Force
2020-12-18
Fixed capacitors for use in electronic equipment - Part 13 : sectional
specification - Fixed polypropylene film dielectric metal foil DC capacitors
AFNOR
NF EN 868-8
Cancelled
2009-10-02
Packaging materials and systems for medical devices which are to be
sterilized. Part 8 : re-usable sterilization containers for steam
sterilizers conforming to EN 285. Requirements and test methods.
AFNOR
NF EN 60512-16-9
In Force
2008-12-01
Connectors for electronic equipment - Tests and measurements - Part 16-9
: mechanical tests on contacts and terminations - Test 16i : grounding
contact spring holding force
AFNOR
NF EN 1007-6
In Force
2008-02-01
Advanced technical ceramics - Ceramic composites - Methods of test for
reinforcement - Part 6 : determination of tensile properties of filament
at high temperature
AFNOR
NF P98-125
Cancelled
2009-05-01
Road foundations. Untreated sand-gravel mix. Methodology for laboratory study.
AFNOR
NF EN 60317-29/A1
In Force
2010-04-01
Specifications for particular types of winding wires - Part 29 :
polyester or polyesterimide overcoated with polyamide-imide enamelled
rectangular copper wire, class 200
AFNOR
NF EN ISO 19334
In Force
2011-07-01
Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis
AFNOR
NF EN 12697-22/IN1
In Force
2023-12-20
Bituminous mixtures - Test methods - Part 22 : wheel tracking -
Amendment 1
AFNOR
NF EN IEC 60317-27-2
In Force
2020-07-31
Specifications for particular types of winding wires - Part 27-2 : paper
tape covered round aluminium wire
AFNOR
NF EN ISO/CIE 11664-6
In Force
2022-09-21
Colorimetry - Part 6 : CIEDE2000 colour-difference formula
AFNOR
NF EN IEC 62056-3-1
In Force
2021-08-27
Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1 :
use of local area networks on twisted pair with carrier signalling
AFNOR
NF EN 60534-2-1
Cancelled
1999-09-05
Industrial-process control valves. Part 2 : flow capacity. Section one :
sizing equations for incompressible fluid flow under installed conditions.
AFNOR
NF ISO 15270
In Force
2009-11-01
Plastics - Guidelines for the recovery and recycling of plastics waste
AFNOR
NF EN IEC 62828-2
In Force
2018-02-09
Reference conditions and procedures for testing industrial and process
measurement transmitters - Part 2 : specific procedures for pressure transmitters
AFNOR
NF EN 1995-1-2/NA
In Force
2022-11-05
Eurocode 5 : Design of timber structures - Part 1-2 : General -
Structural fire design - National annex to NF EN 1995-1-2:2004
AFNOR
NF EN 50131-6/A1
In Force
2021-06-18
Alarm systems - Intrusion and hold-up systems - Part 6 : power supplies
AFNOR
NF EN ISO 14529-3
In Force
2000-01-01
Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part
3 : requirements for selected moulding compounds
AFNOR
NF P34-206-2
In Force
1993-05-01
DTU 40-36. Building works. Private contracts. Profiled roof covering
made of prepainted aluminium sheet or aluminium sheet. Part 2 : special clauses.
AFNOR
NF ISO 11007-1
In Force
2021-09-25
Petroleum products and lubricants - Determination of rust-prevention
characteristics of lubricating greases - Part 1 : dynamic wet conditions
AFNOR
NF EN 14897+A1
In Force
2007-09-01
Water conditioning equipment inside buildings - Devices using mercury
low-pressure ultraviolet radiators - Requirements for performance,
safety and testing
AFNOR
NF EN 62670-1
In Force
2014-08-09
Photovoltaic concentrators (CPV) - Performance testing - Part 1 :
standard Conditions
AFNOR
NF EN ISO 18243
In Force
2019-03-06
Electrically propelled mopeds and motorcycles - Test specifications and
safety requirements for lithium-ion battery systems
AFNOR
NF EN 15316-4-3
In Force
2017-06-17
Energy performance of buildings - Method for calculation of system
energy requirements and system efficiencies - Part 4-3 : heat generation
systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3
AFNOR
NF EN 60061-1/A34
In Force
2004-12-01
Lamps caps and holders together with gauges for the control of
interchangeability and safety - Part 1 : lamps caps
AFNOR
NF DTU 25.42 P1-2
In Force
2012-12-01
Building works - Internal insulation and wall linings using gypsum
composite panels - Part 1-2 : general criteria for selection of materials
AFNOR
NF EN ISO 7235
In Force
2009-11-01
Acoustics - Laboratory measurement procedures for ducted silencers and
air-terminal units - Insertion loss, flow noise and total pressure loss
AFNOR
NF DTU 45.11
In Force
2020-03-12
Building works - Thermal insulation of attic floors by blowing
loose-fill insulation product (mineral wool or paper cellulose wadding)
- Part 1-1 : contract bill of technical model clauses - Part 1-2 :
general criteria for choice of materials - Part 2 : contract bill of
special administrative model clauses
AFNOR
NF EN 16051-1
In Force
2012-02-01
Inflation devices and accessories for inflatable consumer products -
Part 1 : compatibility of valves and valve adapters
AFNOR
AFNOR
NF EN 61309
In Force
1995-12-01
Deep-fat fryers for household use. Methods for measuring the performance.
AFNOR
