Normas AFNOR
Filtrar:
AFNOR
NF ETS 300580-2
En Vigor
1998-09-01
Digital cellular telecommunications system (Phase 2). Full rate speech.
. Part 2 : transcoding (GSM 06.10 version 4.1.1).
AFNOR
NF ISO 14243-3
En Vigor
2014-12-19
Implants for surgery - Wear of total knee-joint prostheses - Part 3 :
loading and displacement parameters for wear-testing machines with
displacement control and corresponding environmental conditions for test
AFNOR
NF EN 17917
En Vigor
2023-12-13
Paper and board - Paper and board intended to come into contact with
foodstuffs - Determination of aluminium in aqueous extracts
AFNOR
NF EN 302307-1
En Vigor
2015-03-18
Digital video broadcasting (DVB) - Second generation framing structure,
channel coding and modulation systems for broadcasting, interactive
services, news gathering and other broadband satellite applications -
Part 1 : (DVB-S2) (V1.4.1)
AFNOR
NF EN 15882-3
En Vigor
2012-09-01
Extended applications of results from fire resistance tests for service
installations - Part 3 : penetration seals
AFNOR
AFNOR
NF P95-303
Anulada
2020-06-20
Protection equipment against avalanches. Snow bridge, snow rake. Design specifications.
AFNOR
NF ETS 300456
En Vigor
1997-05-01
Satellite Earth Stations and Systems (SES). Test methods for Very Small
Aperture Terminal (VSATs) operating in the 11/12/14 GHz frequency bands.
AFNOR
NF EN 14620-2
En Vigor
2006-12-01
Design and manufacture of site built, vertical, cylindrical,
flat-bottomed steel tanks for the storage of refrigerated, liquefied
gases with operating temperatures between 0oC and -165oC - Part 2 :
metallic components
AFNOR
NF EN ISO 6744-2
En Vigor
2004-11-01
Binders for paints and varnishes - Alkyd resins - Part 2 : determination
of phthalic anhydride content
AFNOR
NF EN 301489-29
En Vigor
2021-01-16
ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services - Part 29 : specific conditions for Medical Data Service
Devices (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406
MHz bands - Harmonised Standard covering the essential requirements of
article 3.1(b) of Directive 2014/53/EU (V2.2.1)
AFNOR
NF EN 13508-2/IN1
En Vigor
2011-08-01
Investigation and assessment of drain and sewer systems outside
buildings - Part 2 : visual inspection coding system
AFNOR
NF P99-022-1
En Vigor
2003-09-01
Road traffic control - Traffic signal controllers - Part 1 : method of
test of controllers
AFNOR
NF EN ISO 3262-12
Anulada
2023-08-11
Extenders for paints — Specifications and methods of test — Part 12:
Muscovite-type mica
AFNOR
NF EN 12390-13
En Vigor
2021-07-21
Testing hardened concrete - Part 13 : determination of secant modulus of
elasticity in compression
AFNOR
NF EN 12501-2
En Vigor
2003-09-01
Protection of metallic materials against corrosion - Corrosion
likelihood in soil - Part 2 : low alloyed and non alloyed ferrous materials
AFNOR
NF EN ISO 187
En Vigor
2022-11-09
Paper, board and pulps - Standard atmosphere for conditioning and
testing and procedure for monitoring the atmosphere and conditioning of samples
AFNOR
NF EN 13523-19
En Vigor
2019-09-18
Coil coated metals - Test methods - Part 19 : panel design and method of
atmospheric exposure testing
AFNOR
NF DTU 23.3 P1-1
En Vigor
2008-06-01
Building works - Frames with industrial elements in concrete - Part 1-1
: contract bill of technical model clauses
AFNOR
NF EN 10253-1
En Vigor
1999-12-01
Butt-welding pipe fittings - Part 1 : Wrought carbon steel for general
use and without specific inspection requirements
AFNOR
AFNOR
NF EN 1090-2/IN1
En Vigor
2024-05-01
Execution of steel structures and aluminium structures - Part 2:
Technical requirements for steel structures
AFNOR
AFNOR
NF EN 12441-2/A2
En Vigor
2005-03-01
Zinc and zinc alloys - Chemical analysis - Part 2 : determination of
magnesium in zinc alloys - Flame atomic absorption spectrometric method
AFNOR
NF EN ISO 175
En Vigor
2011-01-01
Plastics - Methods of test for the determination of the effects of
immersion in liquid chemicals
AFNOR
NF DTU 33.1 P1-2
En Vigor
2008-05-01
Building construction work - Curtain-walling - Part 1-2 : general
criteria for selection of materials
AFNOR
NF R40-021
En Vigor
1988-08-01
Road vehicles. Distribution of loads on the axles of semi-trailers.
Method of calculation.
AFNOR
NF EN ISO 19066-2
En Vigor
2020-04-01
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS)
moulding and extrusion materials - Part 2 : preparation of test
specimens and determination of properties
AFNOR
NF EN ISO 12707
En Vigor
2016-06-04
Non-destructive testing - Magnetic particle testing - Vocabulary
AFNOR
NF EN 16153+A1
En Vigor
2015-04-18
Light transmitting flat multiwall polycarbonate (PC) sheets for internal
and external use in roofs, walls and ceilings - Requirements and test methods
AFNOR
NF EN ISO 717-1
En Vigor
2020-12-16
Acoustics - Rating of sound insulation in buildings and of building
elements - Part 1 : airborne sound insulation
AFNOR
NF EN ISO 15875-1/A1
En Vigor
2007-10-01
Plastics piping systems for hot and cold water installations -
Crosslinked polyethylene (PE-X) - Part 1 : general
AFNOR
NF EN 10225-1
En Vigor
2019-05-15
Weldable structural steels for fixed offshore structures - Technical
delivery conditions - Part 1 : plates
AFNOR
NF EN ISO 9346
En Vigor
2007-12-01
Hygrothermal performance of buildings and building materials - Physical
quantities for mass transfer - Vocabulary
AFNOR
NF EN ISO 20843
En Vigor
2011-04-01
Petroleum and related products - Determination of pH of fire-resistant
fluids within categories HFAE, HFAS and HFC
AFNOR
NF EN 10092-1
En Vigor
2004-05-01
Hot rolled spring steel flat bars - Part 1 : flat bars - Dimensions and
tolerances on shape and dimensions
AFNOR
NF EN 16603-10-12
En Vigor
2016-11-26
Space engineering - Method for the calculation of radiation received and
its effects, and a policy for design margins
AFNOR
NF EN ISO 26986
En Vigor
2013-02-23
Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride)
floor covering - Specification
AFNOR
NF EN 12591
En Vigor
2009-12-01
Bitumen and bituminous binders - Specifications for paving grade bitumens
AFNOR
NF EN ISO 14323
En Vigor
2015-04-25
Resistance welding - Destructive testing of welds - Specimen dimensions
and procedure for impact tensile shear test and cross-tension testing of
resistance spot and embossed projection welds
