Normas AFNOR
Filtrar:
AFNOR
NF EN ISO 14002-2
En Vigor
2023-05-31
Environmental management systems - Guidelines for using ISO 14001 to
address environmental aspects and conditions within an environmental
topic area - Part 2 : water
AFNOR
NF EN 300440
En Vigor
2018-12-21
Short Range Devices (SRD) - Radio equipment to be used in the 1 GHz to
40 GHz frequency range - Harmonised Standard covering the access to
radioelectric spectral (V2.2.1)
AFNOR
NF EN 845-1/IN1
En Vigor
2016-09-03
Specification for ancillary components for masonry - Part 1 : wall ties,
tension straps, hangers and brackets
AFNOR
NF EN 12457-4
En Vigor
2002-12-01
Characterization of waste - Leaching - Compliance test for leaching of
granular waste materials and sludges - Part 4 : one stage batch test at
a liquid to solid ratio of 10 l/kg for materials with particle size
below 10 mm (without or with size reduction)
AFNOR
NF ETS 300356-10
En Vigor
1997-07-01
Integrated Services Digital Network (ISDN). Signalling System no 7 ISDN
User Part (ISUP) version 2 for the international interface . Part 10 :
Subadressing (SUB) supplementary service.
AFNOR
NF EN 1917
En Vigor
2003-12-01
Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
AFNOR
NF EN ISO 8781-3
En Vigor
1995-05-01
Pigments and extenders. Methods of assessment of dispersion
characteristics. Part 3 : assessment from the change in gloss.
AFNOR
NF ETS 300356-3
En Vigor
1997-07-01
Integrated Services Digital Network (ISDN). Signalling System no 7 ISDN
User Part (ISUP) version 2 for the international interface . Part 3 :
Calling Line Identification Presentation (CLIP) supplementary service.
AFNOR
AFNOR
NF ISO 1268-8
En Vigor
2004-10-01
Fibre-reinforced plastics - Methods of producing test plates - part 8 :
compression moulding of SMC and BMC
AFNOR
NF EN 14651/IN1
En Vigor
2007-12-01
Test method for metallic fibered concrete - Measuring the flexural
tensile strength (limit or proportionality (LOP), residual)
AFNOR
NF EN ISO 10619-3
En Vigor
2012-03-01
Rubber and plastics hoses and tubing - Measurement of flexibility and
stiffness - Part 3 : bending tests at high and low temperatures
AFNOR
NF EN 13074-2
En Vigor
2019-02-13
Bitumen and bituminous binders - Recovery of binder from bituminous
emulsion or cut-back or fluxed bituminous binders - Part 2 :
stabilisation after recovery by evaporation
AFNOR
NF EN 1993-1-4/A1
En Vigor
2015-12-11
Eurocode 3 - Design of steel structures - Part 1-4 : general rules -
Supplementary rules for stainless steels
AFNOR
NF EN 1500
En Vigor
2013-06-29
Chemical disinfectants and antiseptics - Hygienic handrub - Test method
and requirements (phase 2/step 2)
AFNOR
NF EN 12155
En Vigor
2000-10-01
Curtain walling - Watertightness - Laboratory test under static pressure
AFNOR
AFNOR
NF EN ISO 24026-1
En Vigor
2020-06-17
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion
materials - Part 1 : Designation system and basis for specifications
AFNOR
NF P39-201-2
En Vigor
1993-05-01
DTU 40-14. Building works. Private contracts. Roof covering made of
asphalt shingles. Part 2 : special clauses.
AFNOR
NF EN ISO 3452-2
En Vigor
2021-06-02
Non-destructive testing - Penetrant testing - Part 2 : testing of
penetrant materials
AFNOR
NF EN ISO 23913
En Vigor
2009-11-01
Water quality - Determination of chromium(VI) - Method using flow
analysis (FIA and CFA) and spectrometric detection
AFNOR
NF EN 13084-8
En Vigor
2005-10-01
Free-standing industrial chimneys - Part 8 : design and execution of
mast construction with satellite components
AFNOR
NF EN ISO 24343-1
En Vigor
2012-04-01
Resilient and laminate floor coverings - Determination of indentation
and residual indentation - Part 1 : residual indentation
AFNOR
NF EN 10049
En Vigor
2014-01-18
Measurement of roughness average Ra and peak count RPc on metallic flat products
AFNOR
NF EN 14318-2
En Vigor
2013-08-10
Thermal insulating products for buildings - In-situ formed dispensed
rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part
2 : specification for the installed insulation products
AFNOR
NF EN 1447/IN1
En Vigor
2010-12-01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP)
pipes - Determination of long-term resistance to internal pressure
AFNOR
NF ISO 5682-2
En Vigor
2017-08-05
Equipment for crop protection - Spraying equipment - Part 2 : test
methods to assess the horizontal transverse distribution for hydraulic sprayers
AFNOR
NF EN 1011-8
En Vigor
2018-05-02
Welding - Recommendations for welding of metallic materials - Part 8 :
welding of cast irons
AFNOR
NF EN 1051-2
En Vigor
2007-12-01
Glass in building - Glass blocks and glass pavers - Part 2 : evaluation
of conformity/Product standard
AFNOR
NF EN 1657
En Vigor
2024-12-18
Chemical disinfectants and antiseptics - Quantitative suspension test
for the evaluation of fungicidal or yeasticidal activity of chemical
disinfectants and antiseptics used in the veterinary area - Test method
and requirements (phase 2, step 1)
AFNOR
NF EN 1482-4
En Vigor
2024-04-10
Fertilizers, liming materials and inhibitors - Sampling and sample
preparation - Part 4 : sampling for microbial presence
AFNOR
NF P90-113
En Vigor
2020-10-30
Sports grounds - Natural turf sport areas - Specifications for construction
AFNOR
AFNOR
NF EN ISO 20274
En Vigor
2017-08-30
Vitreous and porcelain enamels - Preparation of samples and
determination of thermal expansion coefficient
AFNOR
NF U47-200
En Vigor
2016-09-10
Animal health analysis methods - Good practice guide for cell cultures
AFNOR
AFNOR
NF EN IEC 60704-2-18
En Vigor
2022-03-04
Household and similar electrical appliances - Test code for the
determination of airborne acoustical noise - Part 2-18 : particular
requirements for electric water heaters
AFNOR
NF EN 12971-2
En Vigor
1999-10-01
Reinforcements. Specification for textile glass chopped strands. Part 2
: test methods and general requirements.
AFNOR
FD S52-411
En Vigor
2020-06-17
Swimming pools for public use - Guidelines for the application of NF EN
15288-2:2018 - Safety requirements for operation
AFNOR
NF EN 326-2/IN1
En Vigor
2014-09-27
Wood-based panels - Sampling, cutting and inspection - Part 2 : initial
type testing and factory production control
