Normas AFNOR
Filtrar:
AFNOR
NF EN 61237-4
En Vigor
1998-02-01
Broadcast video tape recorders. Methods of measurement. Part 4 :
analogue audio performance measurement.
AFNOR
NF EN 331
En Vigor
2016-02-20
Manually operated ball valves and closed bottom taper plug valves for
gas installations for buildings
AFNOR
AFNOR
NF EN 61966-2-4/A1
En Vigor
2016-11-26
Multimedia systems and equipment - Colour measurement and management -
Part 2-4 : colour management - Extended-gamut YCC colour space for video
applications - xvYCC
AFNOR
NF ISO 1132-2
En Vigor
2002-01-01
Rolling bearings - Tolerances - Part 2 : measuring and gauging
principles and methods
AFNOR
NF EN ISO 6149-4
En Vigor
2017-09-13
Connections for fluid power and general use - Ports and stud ends with
ISO 261 metric threads and O-ring sealing - Part 4 : dimensions, design,
test methods and requirements for external hex and internal hex port plugs
AFNOR
NF EN 1021-1
Anulada
2006-05-20
Furniture. Assessment of the ignitability of upholstered furniture. Part
1 : ignition source : smouldering cigarette.
AFNOR
NF EN IEC 60512-1
En Vigor
2018-11-30
Connectors for electrical and electronic equipment - Tests and
measurements - Part 1 : generic specification
AFNOR
NF EN 1012-1
Anulada
2013-04-27
Compressors and vacuum pumps. Safety requirements. Part 1 : compressors.
AFNOR
NF D65-761
En Vigor
2013-06-29
Furniture for industrial use - Industrial seating - Safety, design
requirements and test methods
AFNOR
UTE C15-106
Anulada
2003-12-01
High and low-voltage electrical installations - Cross-sections of
protective conductors, earthing conductors and equipotential bonding conductors
AFNOR
NF EN 60297-3-101
En Vigor
2005-06-01
Mechanical structures for electronic equipment - Dimensions of
mechanical structures of the 482,6 mm (19 in) series - Part 3-101 :
subracks and associated plug-in units
AFNOR
NF ISO 3686-2
En Vigor
2000-11-01
Test conditions for high accuracy turret and single spindle coordinate
drilling and boring machines with table of fixed height with vertical
spindle - Testing of the accuracy - Part 2 : portal type machines with
moving table
AFNOR
NF EN IEC 61169-64
En Vigor
2019-11-01
Radio frequency connectors - Part 64 : sectional specification - RF
coaxial connectors with 0,8 mm inner diameter of outer conductor -
Characteristic impedance 50 ohms (type 0,8)
AFNOR
NF EN ISO 19085-10/A11
En Vigor
2020-09-16
Woodworking machines - Safety - Part 10 : building site saws (contractor saws)
AFNOR
NF EN IEC 62878-1
En Vigor
2019-12-06
Device embedding assembly technology - Part 1 : generic specification
for device embedded substrates
AFNOR
NF ISO 10889-6
En Vigor
2016-06-04
Tool holders with cylindrical shank - Part 6 : type E with cylindrical seat
AFNOR
NF EN 12953-4
En Vigor
2018-03-28
Shell boilers - Part 4 : workmanship and construction of pressure parts
of the boiler
AFNOR
AFNOR
NF ISO 6099
Anulada
2001-11-20
Fluid power systems and components. Cylinders. Identification code for
mounting dimensions and mounting type.
AFNOR
FD CEN ISO/TR 19664
En Vigor
2019-06-26
Human response to vibration - Guidance and terminology for
instrumentation and equipment for the assessment of daily vibration
exposure at the workplace according to the requirements of health and safety
AFNOR
NF ISO 8573-8
En Vigor
2004-05-01
Compressed air - Part 8 : test methods for solid particle content by
mass concentration
AFNOR
NF EN 60749-42
En Vigor
2015-03-11
Semiconductor devices - Mechanical and climatic test methods - Part 42 :
temperature humidity storage
AFNOR
NF EN 500-1+A1
En Vigor
2010-01-01
Mobile road construction machinery - Safety - Part 1 : common requirements
AFNOR
NF EN 60712/A1
En Vigor
1994-12-01
Helical-scan video-tape cassette system using 19 mm (3/4) magnetic tape,
known as U-format.
AFNOR
NF ISO 1986-1
En Vigor
2014-08-16
Test conditions for surface grinding machines with horizontal grinding
wheel spindle and reciprocating table - Testing of the accuracy - Part 1
: machines with a table length of up to 1 600 mm
AFNOR
NF EN 14688/IN1
En Vigor
2018-10-17
Sanitary appliances - Wash basins - Functional requirements and test methods
AFNOR
NF EN 12409/IN1
En Vigor
2011-12-01
Plastics and rubber machines - Thermoforming machines - Safety requirements
AFNOR
AFNOR
NF EN ISO 1833-2
En Vigor
2020-07-01
Textiles - Quantitative chemical analysis - Part 2 : ternary fibre mixtures
AFNOR
NF EN ISO 6940
En Vigor
2004-08-01
Textile fabrics - Burning behaviour - Determination of ease of ignition
of vertically oriented specimens
AFNOR
NF EN ISO 3506-1
En Vigor
2020-04-15
Fasteners - Mechanical properties of corrosion-resistant stainless steel
fasteners - Part 1 : bolts, screws and studs with specified grades and
property classes
AFNOR
NF EN 60512-15-3
En Vigor
2008-12-01
Connectors for electronic equipment - Tests and measurements - Part 15-3
: connector tests (mechanical) - Test 15c : insert retention in housing (torsional)
AFNOR
NF EN ISO 22751
En Vigor
2020-09-23
Rubber or plastic coated fabrics - Physical and mechanical test -
Determination of bending force
AFNOR
NF EN ISO 16186
En Vigor
2021-06-16
Footwear - Critical substances potentially present in footwear and
footwear components - Determination of dimethyl fumarat (DMFU)
AFNOR
NF EN 61196-3
En Vigor
1999-08-01
Radio frequency cables. Part 3 : sectional specification for coaxial
cables for local area networks
AFNOR
NF EN 61249-2-9
En Vigor
2004-02-01
Materials for printed boards and other interconnecting structures - Part
2-9 : reinforced base materials clad and unclad - Bismaleimide/triazine,
modified epoxide or unmodified, woven E-glass reinforced laminated
sheets of defined flammability (vertical burning test), copper-clad
AFNOR
NF EN 50516-3-1
En Vigor
2016-06-11
Industrial connector sets and interconnect components to be used in
optical fibre control and communication systems - Product specifications
- Part 3-1 : type ODVA APC terminated on EN 60793-2-50 category B1.1 and
B1.3 singlemode fibre to meet the requirements of category I (industrial
environments) as specified in EN 50173-1 and IEC 61753-1-3
AFNOR
NF EN 13215/IN1
En Vigor
2020-08-12
Condensing units for refrigeration - Rating conditions, tolerances and
presentation of manufacturer's performance data
AFNOR
NF EN 62047-19
En Vigor
2014-03-19
Semiconductor devices - Micro-electromechanical devices - Part 19 :
electronic compasses
