Estamos mejorando nuestra Tienda, Portal de clientes y Aenormas para ofrecerte una mejor experiencia.
Si detectas cualquier incidencia o necesitas ayuda durante el proceso de compra, puedes contactarnos a través del chat o escribirnos a normas@aenor.com.
Nuestro equipo estará encantado de ayudarte.
DIN EN ISO 3691-3/A1:2021-12
Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated load (ISO 3691-3:2016/DAM 1:2021); German and English version EN ISO 3691-3:2016/prA1:2021 / Note: Date of issue 2021-10-29
| Fecha edición: |
2023-11-01
Anulada
|
|---|---|
| Fecha cancelación: | 2023-11-01 |
| Idiomas disponibles: | Alemán, Inglés |
| Resumen: | This document gives safety requirements and the means for their verification, additional to those of ISO 3691?1, for industrial trucks with a vertical, non-tilting mast: a) those trucks having an elevating operator position, and order?picking trucks, as defined in ISO 5053?1, where the elevating operator position and the load?handling device lifts to a height of more than 1200 mm above ground level; b) lateral- and front-stacking trucks, as defined in ISO 5053?1, designed to travel with a load-handling device elevated more than 1200 mm above ground level, with the load-handling device elevated, lowered or laterally displaced, laden or unladen, while the truck is travelling. These trucks are designed to travel indoors on a smooth, level surface (e. g. concrete) and can be guided, unguided, or both, when in use; they are not intended to tow or push. This document is not applicable to stacker trucks which handle two loads, one on the forks and the other on the support arms, this type of truck being covered by ISO 3691?1. It is not applicable to trucks with an elevating operator position up to and including 1200 mm, or to trucks specifically designed to travel with an elevated load having a fork height up to and including 1200 mm above ground level.It is not applicable to low-level order pickers with elevating operator's position up to and including 1200 mm lift height which can be equipped with an additional load lifting device having a maximum lift height of 1800 mm from ground level. This document deals with all significant hazards, hazardous situations, or hazardous events, as listed in Annex A, relevant to the applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. It does not establish requirements for hazards that can occur when using trucks on public roads or when operating in potentially explosive atmospheres. Regional requirements, additional to the requirements given in this document, are addressed in ISO/TS 3691?7 and ISO/TS 3691?8. Dieses Dokument enthält Sicherheitsanforderungen und die Mittel zu deren Überprüfung, zusätzlich zu denen der ISO 3691-1, für Flurförderzeuge mit senkrechtem, nicht neigbarem Mast: a) mit hebbarem Fahrerplatz nach ISO 5053-1, wobei der hebbare Fahrerplatz und das Lastaufnahmemittel mehr als 1200 mm über Boden angehoben werden kann; b) vorgesehen zum Fahren mit über 1200 mm über dem Boden angehobenem Lastaufnahmemittel wie definiert in ISO 5053-1.Dabei darf das beladene oder unbeladene Lastaufnahmemittel während der Fahrt gehoben, gesenkt oder seitlich bewegt werden. Diese Flurförderzeuge sind zum Fahren in geschlossenen Räumen auf einem glatten und flächenfertigen Boden (z.B. Beton) ausgelegt und können während des Einsatzes geführt, nicht geführt oder für beide Bedingungen eingesetzt werden und sind nicht zum Ziehen oder Schieben vorgesehen. Dieses Dokument gilt nicht für Stapler, die zwei Lasten handhaben, eine auf den Gabeln und die andere auf den Tragarmen, wobei dieser Staplertyp von ISO 3691-1 abgedeckt wird; es gilt nicht für Stapler mit einem anhebbaren Fahrerplatz bis einschließlich 1200 mm oder für Stapler, die speziell zum Fahren mit einer angehobenen Last mit einer Gabelhöhe bis einschließlich 1200 mm über dem Boden ausgelegt sind. Sie gilt nicht für Niederhubkommissionierer mit hebbarem Fahrerplatz bis einschließlich 1200 mm Hubhöhe, die mit einer zusätzlichen Lastaufnahmevorrichtung mit einer maximalen Hubhöhe von 1800 mm über dem Boden ausgestattet werden können. Dieses Dokument behandelt alle signifikanten Gefahren, Gefahrensituationen oder gefährliche Ereignisse gemäß Anhang A, die für die betreffenden Maschinen bei bestimmungsgemäßer und vom Hersteller vernünftigerweise vorhersehbarer missbräuchlicher Verwendung relevant sind. Sie legt keine Anforderungen für Gefahren fest, die beim Einsatz von Lastkraftwagen auf öffentlichen Straßen oder beim Betrieb in explosionsgefährdeten Bereichen auftreten können. Regionale Anforderungen, die zusätzlich zu den in diesem Dokument aufgeführten Anforderungen in ISO/TS 3691-7 und ISO/TS 3691-8 behandelt werden. |
| Keywords: | Accident prevention|Brakes|Control devices|Definitions|Driver seats|Drivers|Driving direction|Elevating-platform trucks|Hazards|Human factors|Industrial trucks|Lists|Loading|Machines|Maintenance|Materials handling equipment|Mechanical engineering|Operating load|Operation|Operator places|Operators|Powered industrial trucks|Safety requirements|Seats|Stabs |
| ICS: | 53.060 - Carretillas de manutención |
| CTN: | |
|
Reemplazo Normas |
Es reemplazada por DIN EN ISO 3691-3:2023-11 |










