Estamos mejorando nuestra Tienda, Portal de clientes y Aenormas para ofrecerte una mejor experiencia.
Si detectas cualquier incidencia o necesitas ayuda durante el proceso de compra, puedes contactarnos a través del chat o escribirnos a normas@aenor.com.
Nuestro equipo estará encantado de ayudarte.
DIN 4753-7:2019-05
Water heaters, water heating installations and storage water heaters for drinking water - Part 7: Tanks with a capacity of up to 2 000 l, requirements relating to manufacture, thermal insulation and corrosion protection
| Fecha edición: |
2019-05-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This standard specifies the requirements for the thermal insulation, corrosion protection and manufacturing for unvented (closed) storage water heaters for drinking water with a capacity of up to 2000 l, to be connected to water supply systems having an allowable operating pressure between 0,05 MPa and 1,0 MPa (0,5 bar and 10 bar). They shall be fitted with control- and safety devices which shall be dimensioned so that the allowable operating temperature of the stored drinking water does not exceed 95 °C. This standard only applies to storage water heaters and storage water heater systems, where the formation of air or vapor of more than 5 l is safely prevented. |
| Keywords: | Closed|Coatings|Corrosion protection|Drinking water|Foil|Inspection|Internal coatings|Materials|Metals|Non ventilated|Potable water|Production|Rubber|Safety engineering|Service water|Specification (approval)|Steel drums|Steels|Tanks|Testing|Thermal environment systems|Thermal insulation|Vitreous enamel|Water heaters|Water heating installations|Water storage tanks|Water supply |
| ICS: | 91.140.65 - Aparatos para producción de agua caliente sanitaria |
| CTN: | |
|
Reemplazo Normas |
Reemplaza a DIN 4753-7:2011-11 Reemplaza a DIN 4753-7:2018-10 |










