Estamos mejorando nuestra Tienda, Portal de clientes y Aenormas para ofrecerte una mejor experiencia.
Si detectas cualquier incidencia o necesitas ayuda durante el proceso de compra, puedes contactarnos a través del chat o escribirnos a normas@aenor.com.
Nuestro equipo estará encantado de ayudarte.
BS EN IEC 61000-6-3:2021
Electromagnetic compatibility (EMC). Generic standards. Emission standard for equipment in residential environments
| Fecha edición: |
2021-03-30
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés |
| Resumen: | IEC 61000-6-3:2020 is a generic EMC emission standard applicable
only if no relevant dedicated product or product family EMC
emission standard has been published. This part of IEC 61000 for
emission requirements applies to electrical and electronic
equipment intended for use at residential (see 3.1.14) locations.
This part of IEC 61000 also applies to electrical and electronic
equipment intended for use at other locations that do not fall
within the scope of IEC 61000-6-8 or IEC 61000-6-4. The intention
is that all equipment used in the residential, commercial and
light-industrial environments are covered by IEC 61000-6-3 or IEC
61000-6-8. If there is any doubt the requirements in IEC 61000-6-3
apply. The conducted and radiated emission requirements in the
frequency range up to 400 GHz are considered essential and have
been selected to provide an adequate level of protection of radio
reception in the defined electromagnetic environment. Not all
disturbance phenomena have been included for testing purposes but
only those considered relevant for the equipment intended to
operate within the locations included within this document. The
emission requirements in this document are not intended to be
applicable to the intentional transmissions and their harmonics
from a radio transmitter as defined by the ITU. This third edition
cancels and replaces the second edition published in 2006 and its
Amendment 1:2010. This edition constitutes a technical revision.
This edition includes the following significant technical changes
with respect to the previous edition: a) alternative method for
measuring conducted emissions on DC ports; b) limits and
requirements applicable only to equipment intended to be used in
residential locations; c) more stringent limits for DC power ports.
NOTE 1 Safety considerations are not covered by this document. NOTE
2 In special cases, situations will arise where the levels
specified in this document will not offer adequate protection; for
example where a sensitive receiver is used in close proximity to an
equipment. In these instances, special mitigation measures can be
employed. NOTE 3 Disturbances generated in fault conditions of
equipment are not covered by this document. NOTE 4 As the
requirements in this document are more stringent or equivalent to
those requirements in IEC 61000-6-4 and IEC 61000-6-8, equipment
fulfilling the requirements of this document comply with the
requirements of IEC 61000-6-4 and IEC 61000-6-8.
|
| ICS: | |
| CTN: | GEL/210 - GEL/210 |
|
Equivalencia Internacional |
Idéntica EN 61869-1:2009 |
|
Reemplazo Normas |
Reemplaza a BS EN 61000-6-3:2007+A1:2011 |










