Estamos mejorando nuestra Tienda, Portal de clientes y Aenormas para ofrecerte una mejor experiencia.
Si detectas cualquier incidencia o necesitas ayuda durante el proceso de compra, puedes contactarnos a través del chat o escribirnos a normas@aenor.com.
Nuestro equipo estará encantado de ayudarte.
ASTM D5453 - 19
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
| Fecha edición: |
2019-05-01
Anulada
|
|---|---|
| Fecha cancelación: | 2019-05-01 |
| Idiomas disponibles: | Inglés |
| Resumen: | |
| Keywords: | analysis; biodiesel; biodiesel-fuel blends; E-85; ethanol; ethanol-fuel blends; diesel; fluorescence; gasoline; jet fuel; kerosine; M-85; RFG; sulfur; ultraviolet; |
| Scope: | 1.1 This test method covers the determination of total sulfur in liquid hydrocarbons, boiling in the range from approximately 25 °C to 400 °C, with viscosities between approximately 0.2 cSt and 20 cSt (mm2/s) at room temperature. 1.2 Three separate interlaboratory studies (ILS) on precision, and three other investigations that resulted in an ASTM research report, have determined that this test method is applicable to naphthas, distillates, engine oil, ethanol, Fatty Acid Methyl Ester (FAME), and engine fuel such as gasoline, oxygen enriched gasoline (ethanol blends, E-85, M-85, RFG), diesel, biodiesel, diesel/biodiesel blends, and jet fuel. Samples containing 1.0 mg/kg to 8000 mg/kg total sulfur can be analyzed (Note 1). Note 1: Estimates of the pooled limit of quantification (PLOQ) for the precision studies were calculated. Values ranged between less than 1.0 mg/kg and less than 5.0 mg/kg (see Section 8 and 15.1). 1.3 This test method is applicable for total sulfur determination in liquid hydrocarbons containing less than 0.35 % (m/m) halogen(s). 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For warning statements, see 3.1, 6.3, 6.4, Section 7, and 8.1. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| ICS: | 75.100 - Lubricantes, aceites industriales y productos relacionados |
| CTN: | D02.03 - D02.03 |
|
Otras Relaciones |
Es referenciada por D8074 - 23 Es referenciada por D3699 - 25 Es referenciada por D5967-21 Es referenciada por D8048 - 25 Es referenciada por D1655 - 24b Es referenciada por D8076 - 24 Es referenciada por D8577 - 25 Es referenciada por D4806 - 25 Es referenciada por D613 - 25 Es referenciada por D7156 - 24 Es referenciada por D8111 - 25 Es referenciada por D7455 - 24 Es referenciada por D910 - 24 Es referenciada por D4814 - 25 Es referenciada por D6227 - 24a Es referenciada por D7422 - 25 Es referenciada por D8291 - 25 Es referenciada por D8617 - 25 Es referenciada por D5798 - 25 Es referenciada por D6751 - 24 |










