Estamos mejorando nuestra Tienda, Portal de clientes y Aenormas para ofrecerte una mejor experiencia.
Si detectas cualquier incidencia o necesitas ayuda durante el proceso de compra, puedes contactarnos a través del chat o escribirnos a normas@aenor.com.
Nuestro equipo estará encantado de ayudarte.
ASTM D3359 - 02
Standard Test Methods for Measuring Adhesion by Tape Test
| Fecha edición: |
2002-08-10
Anulada
|
|---|---|
| Fecha cancelación: | 2002-08-10 |
| Idiomas disponibles: | Inglés |
| Resumen: | |
| Keywords: | adhesion; tape; crosscut adhesion test method; tape adhesion test method; X-cut adhesion test method |
| Scope: | 1.1 These test methods cover procedures for assessing the adhesion of coating films to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the film. 1.2 Test Method A is primarily intended for use at job sites while Test Method B is more suitable for use in the laboratory. Also, Test Method B is not considered suitable for films thicker than 5 mils (125μm). Note 1—Subject to agreement between the purchaser and the seller, Test Method B can be used for thicker films if wider spaced cuts are employed. 1.3 These test methods are used to establish whether the adhesion of a coating to a substrate is at a generally adequate level. They do not distinguish between higher levels of adhesion for which more sophisticated methods of measurement are required. Note 2—It should be recognized that differences in adherability of the coating surface can affect the results obtained with coatings having the same inherent adhesion. 1.4 In multicoat systems adhesion failure may occur between coats so that the adhesion of the coating system to the substrate is not determined. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
| ICS: | 83.180 - Adhesivos |
| CTN: | D01.23 - D01.23 |
|
Otras Relaciones |
Es referenciada por D3276-21 Es referenciada por F3458-21 Es referenciada por F2589-16R21 Es referenciada por F2050-19 Es referenciada por F2085-19 Es referenciada por E1797-12R17E01 Es referenciada por F1427-21E01 Es referenciada por F2388-21 Es referenciada por F0404-21 Es referenciada por F2549-22 Es referenciada por F3208-20 Es referenciada por F1235-18 Es referenciada por D7270-07R21 Es referenciada por F1821-19E02 Es referenciada por D5146-10R19 Es referenciada por D7733-12R21 Es referenciada por F2264-14R19 Es referenciada por F0146-12R19E01 Es referenciada por B0905-00R21 Es referenciada por F0833-21 |










