Estamos mejorando nuestra Tienda, Portal de clientes y Aenormas para ofrecerte una mejor experiencia.
Si detectas cualquier incidencia o necesitas ayuda durante el proceso de compra, puedes contactarnos a través del chat o escribirnos a normas@aenor.com.
Nuestro equipo estará encantado de ayudarte.
ASTM C1172 - 24
Standard Specification for Laminated Architectural Flat Glass
| Fecha edición: |
2024-09-01
Anulada
|
|---|---|
| Fecha cancelación: | 2024-09-01 |
| Idiomas disponibles: | Inglés |
| Resumen: | This specification covers the quality requirements for cut sizes of flat laminated glass consisting of two or more lites of glass bonded with an interlayer material for use in building glazing. Depending on the number, thickness and treatment of plies, and the number and thickness of interlayers, the glass shall be laminated for applications including but not limited to safety security, detention, hurricane/cyclic-wind resistance, blast resistant, bullet resistant and sound reduction glazing applications. The following test methods shall be performed to meet the specified requirements: impact test for safety glazing; test for missile impact and cyclic pressure; test for security glazing; test for detention glazing; test for bullet resisting glazing; test for burglary resisting glazing; overall bow and warp; and size. |
| Keywords: | annealed; blast resistant; bullet resistant; decorative; glass; heat-treated; hurricane resistant; interlayer; laminated; safety; security; sound; structural; |
| Scope: | 1.1 This specification covers the quality requirements of flat laminated glass consisting of two or more lites of glass bonded with an interlayer material for use in building and related applications. 1.2 Depending on the number, thickness, and treatment of lites, and the number and thickness of interlayers, the glass shall be laminated for applications including, but not limited to, safety, security, detention, hurricane/cyclic-wind resistance, blast resistance, bullet resistance, sound reduction, and decorative glazing. 1.3 Optical distortion and the evaluation thereof are not currently within the scope of the standard. Mockups are recommended as a method to evaluate glass. (See Appendix X1.) 1.4 The dimensional values, except thickness designations, stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. 1.5 The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| ICS: | 81.040.20 - Vidrio para la construcción |
| CTN: | C14.08 - C14.08 |
|
Anulaciones Normas |
Anula a C1172 - 19 |
|
Otras Relaciones |
Es referenciada por E1300 - 24 Es referenciada por C1349 - 17(2024) Es referenciada por C1914 - 21(2025) Es referenciada por F3007 - 24 Es referenciada por C1900 - 24 Es referenciada por F2248 - 19 Es referenciada por E3120 - 19 Es referenciada por C1908 - 21(2025) Es referenciada por E998 - 19(2025) Es referenciada por E2751/E2751M - 21 Es referenciada por F3561 - 25 Es referenciada por C162 - 23 Es referenciada por C1464 - 21 Es referenciada por E3401/E3401M - 24 Es referenciada por C1401 - 23 Es referenciada por E3491 - 25 |










