This European Standard specifies the properties of lightweight aggregates and lightweight filler aggregates obtained by processing natural, manufactured or recycled materials and mixtures of these aggregates for use in concrete, mortar and grout in buildings, roads and civil engineering works.
This European Standard covers lightweight aggregates of mineral origin having particle densities not exceeding
2 000 kg/m3 (2,00 Mg/m3) or loose bulk densities not exceeding 1 200 kg/m3 (1,20 Mg/m3) including:
a) natural aggregates;
b) aggregates manufactured from natural materials and/or from by-products of industrial processes;
c) by-products of industrial processes;
d) recycled aggregates.
It provides for the evaluation of conformity of the products to this European Standard.
The requirements specified in this standard may not be relevant to all types of lightweight aggregates. For particular applications the requirements and tolerances may be adapted for the end use.
NOTE The requirements in this European Standard are based upon experience with aggregate types with an established pattern of use. Care should be taken when considering the use of aggregates from sources with no such pattern of use, e.g., recycled aggregates and aggregates arising from certain industrial by-products. Such aggregates, which should comply with all the requirements of this European Standard, could have other characteristics not included in Mandate M 125 that do not apply to the generality of aggregate types with an established pattern of use and when required, provisions valid at the place of use can be used to assess their suitability.
La présente Norme européenne spécifie les caractéristiques des granulats légers et des fillers légers élaborés à partir de matériaux naturels, artificiels ou recyclés et des mélanges de ces granulats afin d'être utilisés dans le béton, le mortier ou le coulis entrant dans la construction des bâtiments , des routes et des ouvrages de génie civil.
La présente Norme européenne s'applique à des granulats légers ayant une masse volumique réelle n'excédant pas 2 000 kg/m3 (2,00 Mg/m3) ou une masse volumique en vrac n'excédant pas 1 200 kg/m3 (1,20 Mg/m3) parmi lesquels se trouvent :
a) des granulats naturels ;
b) des granulats fabriqués à partir de matériaux naturels et/ou de sous-produits de procédés industriels ;
c) les sous-produits de procédés industriels ;
d) les granulats recyclés.
Elle comprend l'évaluation de la conformité des produits à la présente Norme européenne.
Les exigences spécifiées dans cette norme peuvent ne pas être adaptées à tous les types de granulats légers. Pour des applications particulières les exigences et tolérances peuvent être adaptées à l'emploi.
NOTE Les spécifications de la présente norme européenne sont fondées sur l'expérience acquise avec des types de granulats disposant d'un mode d'utilisation établi. Il convient de prêter une attention particulière aux granulats provenant de ressources ne bénéficiant pas d'une telle expérience, par exemple les granulats recyclés et les granulats issus de certains produits industriels dérivés. Ces granulats, qui doivent être conformes à toutes les spécifications de la présente Norme européenne, pourraient avoir d'autres caractéristiques non mentionnées dans le mandat 125, et ne s'appliquant pas à l'ensemble des types de granulats disposant d'un mode d'utilisation établi ; le cas échéant, des dispositions en vigueur sur le lieu d'utilisation peuvent être adoptées pour évaluer leur aptitude à l'emploi.
Diese Europäische Norm legt die Eigenschaften von leichten Gesteinskörnungen und leichte Gesteinskörnungen für Füller fest, die durch Aufbereitung natürlicher, industriell hergestellter oder rezyklierter Materialien und deren Mischungen gewonnen werden und für Betone, Mörtel und Einpressmörtel, die in Gebäude, Straßen und Ingenieurbauten eingesetzt werden.
Diese Europäische Norm gilt für leichte Gesteinskörnungen mineralischen Ursprungs mit Rohdichten von nicht mehr als 2 000 kg/m3 (2,00 Mg/m3) oder Schüttdichten von nicht mehr als 1 200 kg/m3 (1,20 Mg/m3) und schließt ein:
a) natürliche Gesteinskörnungen;
b) aus natürlichen Rohstoffen und/oder aus industriellen Nebenprodukten hergestellte Gesteinskörnungen;
c) industrielle Nebenprodukte;
d) rezyklierte Gesteinskörnungen.
Sie enthält Festlegungen für die Bewertung der Konformität von Produkten nach dieser Europäischen Norm.
Die in dieser Norm festgelegten Anforderungen sind unter Umständen nicht auf jede Art von leichten Gesteinskörnungen anwendbar. Für besondere Anwendungen dürfen die Anforderungen und Toleranzen dem jeweiligen Verwendungszweck angepasst werden.
ANMERKUNG Die Anforderungen dieser Europäischen Norm basieren auf Erfahrungen mit Gesteinskörnungsarten, die sich in der Anwendung bewährt haben. Die Verwendung von Gesteinskörnungen aus Bezugsquellen ohne eine derartige Bewährung, wie z. B. von rezyklierten oder in einem industriellen Prozess entstandenen Gesteinskörnungen, sollte sorgfältig geprüft werden. Derartige Gesteinskörnungen könnten trotz Übereinstimmung mit sämtlichen Anforderungen dieser Europäischen Norm Eigenschaften besitzen, die nicht im Mandat M 125 erfasst sind und die nicht für die Gesamtheit der Gesteinskörnungsarten mit einer bewährten Anwendung gelten; falls erforderlich, können für die Bewertung ihrer Eignung am jeweiligen Verwendungsort geltende Vorschriften herangezogen werden.