Para búsqueda de normas ISO, ASTM, IEC, IEEE, BSI, DIN , SAE, AFNOR y EN utilizar términos en inglés. Para AFNOR también se pueden usar terminos en francés
Limpiar filtros Aplicar
Resultados para:
Número de resultados: 53.544
ISO 12366:2001 ISO
Estado: PUBLISHED / 2001-12-20
Two-wheeled mopeds — Antilock braking systems (ABS) — Tests and measurement methods
ISO 2859-1:1999 ISO
Estado: PUBLISHED / 1999-11-18
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 10817-1:1998 ISO
Estado: PUBLISHED / 1998-12-20
Rotating shaft vibration measuring systems — Part 1: Relative and absolute sensing of radial vibration
ISO 5782-2:1997 ISO
Estado: PUBLISHED / 1997-12-25
Pneumatic fluid power — Compressed-air filters — Part 2: Test methods to determine the main characteristics to be included in supplier's literature
ISO 10843:1997 ISO
Estado: PUBLISHED / 1997-08-28
Acoustics — Methods for the description and physical measurement of single impulses or series of impulses
ISO 5576:1997 ISO
Estado: PUBLISHED / 1997-07-31
Non-destructive testing — Industrial X-ray and gamma-ray radiology — Vocabulary
ISO 5560:1997 ISO
Estado: PUBLISHED / 1997-07-24
Dehydrated garlic (Allium sativum L.) — Specification
ISO 11843-1:1997 ISO
Estado: PUBLISHED / 1997-06-26
Capability of detection — Part 1: Terms and definitions
ISO 5805:1997 ISO
Estado: PUBLISHED / 1997-05-01
Mechanical vibration and shock — Human exposure — Vocabulary
ISO 5843-3:1997 ISO
Estado: PUBLISHED / 1997-02-27
Aerospace — List of equivalent terms — Part 3: Aerospace bolts and nuts
ISO 5426-2:1996 ISO
Estado: PUBLISHED / 1996-12-26
Information and documentation — Extension of the Latin alphabet coded character set for bibliographic information interchange — Part 2: Latin characters used in minor European languages and obsolete typography
ISO 4871:1996 ISO
Estado: PUBLISHED / 1996-12-19
Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 2923:1996 ISO
Estado: PUBLISHED / 1996-12-05
Acoustics — Measurement of noise on board vessels
ISO 12678-1:1996 ISO
Estado: PUBLISHED / 1996-07-18
Refractory products — Measurement of dimensions and external defects of refractory bricks — Part 1: Dimensions and conformity to drawings
ISO 5456-4:1996 ISO
Estado: PUBLISHED / 1996-06-20
Technical drawings — Projection methods — Part 4: Central projection
ISO 5456-3:1996 ISO
Technical drawings — Projection methods — Part 3: Axonometric representations
ISO 5456-1:1996 ISO
Technical drawings — Projection methods — Part 1: Synopsis
ISO 5456-2:1996 ISO
Technical drawings — Projection methods — Part 2: Orthographic representations
ISO 5353:1995 ISO
Estado: PUBLISHED / 1995-11-16
Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point
ISO 5845-1:1995 ISO
Estado: PUBLISHED / 1995-10-26
Technical drawings — Simplified representation of the assembly of parts with fasteners — Part 1: General principles
ISO 5845-2:1995 ISO
Technical drawings — Simplified representation of the assembly of parts with fasteners — Part 2: Rivets for aerospace equipment
ISO 5711:1995 ISO
Estado: PUBLISHED / 1995-09-21
Tractors and machinery for agriculture and forestry — Wheel-to-hub fixing dimensions
ISO 5223:1995 ISO
Estado: PUBLISHED / 1995-08-17
Test sieves for cereals
ISO 5559:1995 ISO
Dehydrated onion (Allium cepa Linnaeus) — Specification
ISO 4950-3:1995 ISO
Estado: PUBLISHED / 1995-08-03
High yield strength flat steel products — Part 3: Products supplied in the heat-treated (quenched + tempered) condition
ISO 4950-2:1995 ISO
High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition
ISO 4950-1:1995 ISO
High yield strength flat steel products — Part 1: General requirements
ISO 5725-1:1994 ISO
Estado: PUBLISHED / 1994-12-22
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO 5725-3:1994 ISO
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
ISO 5725-6:1994 ISO
Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
ISO 10787-3:1994 ISO
Estado: PUBLISHED / 1994-12-01
Textile machinery and accessories — Heald frames — Part 3: Guides for heald frames
ISO 10787-2:1994 ISO
Textile machinery and accessories — Heald frames — Part 2: Heald-carrying rod fixed directly on the frame stave — Coordinated dimensions
ISO 9457-2:1994 ISO
Estado: PUBLISHED / 1994-09-22
Road vehicles — Metric starter motor pinions — Part 2: Pinions with 20 degree pressure angle
ISO 1005-1:1994 ISO
Estado: PUBLISHED / 1994-07-14
Railway rolling stock material — Part 1: Rough-rolled tyres for tractive and trailing stock — Technical delivery conditions
ISO 5049-1:1994 ISO
Estado: PUBLISHED / 1994-06-30
Mobile equipment for continuous handling of bulk materials — Part 1: Rules for the design of steel structures
ISO 5864:1993 ISO
Estado: PUBLISHED / 1993-12-23
ISO inch screw threads — Allowances and tolerances
ISO 5347-18:1993 ISO
Estado: PUBLISHED / 1993-12-16
Methods for the calibration of vibration and shock pick-ups — Part 18: Testing of transient temperature sensitivity
ISO 5347-16:1993 ISO
Methods for the calibration of vibration and shock pick-ups — Part 16: Testing of mounting torque sensitivity
ISO 5347-15:1993 ISO
Methods for the calibration of vibration and shock pick-ups — Part 15: Testing of acoustic sensitivity
ISO 5347-12:1993 ISO
Methods for the calibration of vibration and shock pick-ups — Part 12: Testing of transverse shock sensitivity
ISO 5347-13:1993 ISO
Methods for the calibration of vibration and shock pick-ups — Part 13: Testing of base strain sensitivity
ISO 5347-8:1993 ISO
Methods for the calibration of vibration and shock pick-ups — Part 8: Primary calibration by dual centrifuge
ISO 4899:1993 ISO
Estado: PUBLISHED / 1993-11-25
Textile-glass-reinforced thermosetting plastics — Properties and test methods
ISO 5626:1993 ISO
Estado: PUBLISHED / 1993-11-18
Paper — Determination of folding endurance
ISO 5678:1993 ISO
Estado: PUBLISHED / 1993-11-04
Agricultural machinery — Equipment for working the soil — S-tines: main dimensions and clearance zones
ISO 5667-7:1993 ISO
Estado: PUBLISHED / 1993-10-14
Water quality — Sampling — Part 7: Guidance on sampling of water and steam in boiler plants
ISO 5838-3:1993 ISO
Estado: PUBLISHED / 1993-09-16
Implants for surgery — Skeletal pins and wires — Part 3: Kirschner skeletal wires
ISO 5667-8:1993 ISO
Estado: PUBLISHED / 1993-03-11
Water quality — Sampling — Part 8: Guidance on the sampling of wet deposition
ISO 5620-1:1992 ISO
Estado: PUBLISHED / 1992-11-25
Shipbuilding and marine structures — Filling connection for drinking water tanks — Part 1: General requirements
ISO 5620-2:1992 ISO
Shipbuilding and marine structures — Filling connection for drinking water tanks — Part 2: Components
Número de resultados: 53544
Lo más vendido
UNE-EN ISO 9001:2015
Sistemas de gestión de la calidad. Requisitos
120€
Comprar
UNE-EN ISO 14001:2015
Sistemas de gestión ambiental. Requisitos con orientación para su uso
UNE 19601:2017
Sistemas de gestión de compliance penal. Requisitos con orientación para su uso
99€
ISO 45001:2018
Occupational health and safety management systems -- Requirements with guidance for use
171,06€
UNE-EN ISO/IEC 17025:2017
Requisitos generales para la competencia de los laboratorios de ensayo y calibración.
UNE-EN ISO 19650-1:2019
Organización y digitalización de la información en obras de edificación e ingeniería civil que utilizan BIM (Building Information Modelling). Gestión de la información al utilizar BIM (Building Information Modelling). Parte 1: Conceptos y principios.
83€
Guía para la aplicación de ISO 45001:2018
Un libro práctico y ameno para guiar a cualquier organización en la implantación de su propio sistema de gestión de la seguridad y salud en el trabajo, siguiendo las directrices de la norma ISO 45001:2018.
85€
Guía práctica para la integración de sistemas de gestión. ISO 9001, ISO 14001 e ISO 45001
Este libro descubre las claves para crear y desarrollar con éxito un plan de integración entre los sistemas de gestión ISO 9001, ISO 14001 e ISO 45001.
40€
Orientaciones para la evaluación de riesgos y las reglas de decisión según la Norma UNE-EN ISO/IEC 17025:2017
Este libro aporta ejemplos y alternativas para el cumplimiento de dos de los nuevos requisitos de la Norma UNE-EN ISO/IEC 17025:2017 aplicados a laboratorios.
30€
Clasificación Decimal Universal (CDU) abreviada. Edición 2016
La CDU abreviada surge con el objetivo de facilitar las tareas de clasificación bibliográfica tanto en la enseñanza como en el ámbito profesional
35€
Guía para la aplicación de UNE-ISO 31000:2018
Esta guía facilita la comprensión y aplicación de la norma UNE-ISO 31000:2018, reproduciendo su contenido con explicaciones y ejemplos prácticos.
70€
Cómo implantar un SGSI según UNE-EN ISO/IEC 27001 y su aplicación en el Esquema Nacional de Seguridad. Edición 2018
Ofrece al lector una descripción de los conceptos y requisitos para la implantación efectiva de un Sistema de Gestión de Seguridad de la Información (SGSI).
28,9€