Buscador de normas

Estado: Active / 2023-11

Laboratory glassware - Conical sockets, taper 1 : 10, blank or roughly ground - Dimensions, tolerances

Estado: Active / 2023-11

Sampling equipments on milk collecting tankers - Part 1: Requirements, verification and subsequent verification

Estado: Active / 2023-11

Determination of the fogging characteristics of trim materials in the interior of automobiles

Estado: Active / 2023-11

Linked BIM data exchange of building information models with other specialist models - Part 4: Linked BIM data exchange of building information models and documents supporting invoices (BIM invoicing container)

Estado: Active / 2023-11

Couplings for compressed air - Claw coupling, 42 mm internal width, with securing nut - Coupling with male, female and hose connection ends, joint ring

Estado: Active / 2023-11

Linked BIM data exchange of building information models with further specialist models - Part 1: Linked data exchange of several specialist models in Building Information Modeling (multi-model container) / Note: CD-ROM

Estado: Active / 2023-11

Outdoor enclosure for non-weather protected locations in telecommunication, signalling, traffic control systems and low-voltage power supply - Requirements and tests

Estado: Active / 2023-11

Testing of mineral oil hydrocarbons and similar products - Determination of chlorine and bromine content - Part 4: Analysis by energy dispersive X-ray spectrometry with low cost instruments

Estado: Active / 2023-11

Sterilization - Sterile supply - Part 6: Microbial barrier testing of packaging materials for medical devices which are to be sterilized

Estado: Active / 2023-11

Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring

Estado: Active / 2023-11

Dentistry - Metallic powders for the additive production of dental restorations

Estado: Active / 2023-11

Linked BIM data exchange of building information models with other specialist models - Part 2: Linked BIM data exchange of building information models and specified bill of quantities (BIM-LV container)

Estado: Active / 2023-11

Linked BIM data exchange of building information models with further specialist models - Part 3: Linked BIM data exchange of building information models and cost determinations (BIM cost container)

Estado: Active / 2023-11

Fastening clamps - Part 1: With tongue

Estado: Active / 2023-11

Lines for fire-brigades - Requirements, test methods, maintenance

Estado: Active / 2023-11

Pneumatic tube systems - Conveyor tube, conveyor tube bend and sleeves for pneumatic tube lines of unplasticized polyvinylchloride (PVC-U)

Estado: Active / 2023-11

Fuels - Polyoxymethylene dimethylether (OME) - Requirements and test methods

Estado: Active / 2023-11

State of railway vehicles - Brake - Part 4: Non ventilated axle mounted brake discs / Note: Date of issue 2023-09-29*Intended as replacement for DIN 27205-4 (2017-03).

Estado: Active / 2023-11

State of railway vehicles - Brake - Part 5: Wheel mounted brake discs / Note: Date of issue 2023-09-29*Intended as replacement for DIN 27205-5 (2017-03).

Estado: Active / 2023-11

State of railway vehicles - Brake - Part 8: Tightness and efficiency / Note: Date of issue 2023-09-29*Intended as replacement for DIN 27205-8 (2017-03).

Estado: Active / 2023-11

Hydrometer for density measurement of buttermilk serum / Note: Date of issue 2023-09-29*Intended as replacement for DIN 10293 (1962-03).

Estado: Active / 2023-11

Acoustics - Determination of aircraft noise exposure at airfields - Part 2: Evaluation and generation of additional input data for calculation - Trajectory data and data acquisition system; Text in German and English / Note: Date of issue 2023-10-13

Estado: Active / 2023-11

Analysis of honey - Determination of water content - Part 2: Digital refractometric method / Note: Date of issue 2023-10-06*Intended as replacement for DIN 10752-2 (2018-09).

Estado: Active / 2023-11

State of railway vehicles - Brake - Part 3: Ventilated axle mounted brake discs / Note: Date of issue 2023-09-29*Intended as replacement for DIN 27205-3 (2017-03).

Estado: Active / 2023-11

Benches for dressing room sports venue - Requirements, testing / Note: Date of issue 2023-10-06*Intended as replacement for DIN 7917 (2020-10).

Estado: Active / 2023-11

Elastic floorings for horses movement, rest and lying surfaces - Requirements and testing / Note: Date of issue 2023-10-20

Estado: Active / 2023-11

State of railway vehicles - Brake - Part 9: Function of driver's brake valve, control devices and indicators in driver's cabs / Note: Date of issue 2023-09-29*Intended as replacement for DIN 27205-9 (2017-03).

Estado: Active / 2023-11

Hiking, trekking, walking and touring ski poles - Requirements and test methods / Note: Date of issue 2023-09-29*Intended as replacement for DIN 79016 (2017-01).

Estado: Active / 2023-11

Slotted pan head screws with small head / Note: Date of issue 2023-09-29*Intended as replacement for DIN 920 (2012-06).

Estado: Active / 2023-11

Glass in Building - Design and construction rules - Part 5: Additional requirements for walk-on glazing / Note: Date of issue 2023-10-20*Intended as replacement for DIN 18008-5 (2013-07).

Estado: Active / 2023-11

State of railway vehicles - Brake - Part 6: Magnetic track brake / Note: Date of issue 2023-09-29*Intended as replacement for DIN 27205-6 (2017-03).

Estado: Active / 2023-11

Testing of petroleum products - Determination of evaporation loss - Part 2: Gas chromatographic method / Note: Date of issue 2023-10-06*Intended as replacement for DIN 51581-2 (1997-05).

Estado: Active / 2023-11

Earth plasters - Requirements, test and labelling / Note: Date of issue 2023-10-06*Intended as replacement for DIN 18947 (2018-12).

Estado: Active / 2023-11

Earthen materials and products - Part 100: Conformity assessment / Note: Date of issue 2023-10-06*Intended as replacement for DIN 18942-100 (2018-12).

Estado: Active / 2023-11

Glass in Building - Design and construction rules - Part 3: Point fixed glazing / Note: Date of issue 2023-10-20*Intended as replacement for DIN 18008-3 (2013-07).

Estado: Active / 2023-11

Testing of ceramic raw materials and ceramic materials - Direct determination of mass fractions of trace impurities in powders, granules and lumps of graphite by optical emission spectroscopy by inductively coupled plasma (ICP OES) and by electrothermal vaporization (ETV) under the action of a halogenated reaction gas (modifiers) / Note: Date of issue 2023-10-13*Intended as replacement for DIN 51457 (2017-05).

Estado: Active / 2023-11

Packaging - Steel drums - Clamping rings with lever / Note: Date of issue 2023-10-20*Intended as replacement for DIN 6644-2 (1987-02).

Estado: Active / 2023-11

Microbiological analysis of milk - Determination of Escherichia coli - Part 1: Method with liquid medium / Note: Date of issue 2023-10-13*Intended as replacement for DIN 10183-1 (1991-05).

Estado: Active / 2023-11

Lifting eye bolts / Note: Date of issue 2023-09-29*Intended as replacement for DIN 580 (2018-04).

Estado: Active / 2023-11

Slotted pan head screws with shoulder / Note: Date of issue 2023-09-29*Intended as replacement for DIN 923 (2012-06).

Estado: Active / 2023-11

Round nuts with set pin holes in side / Note: Date of issue 2023-10-06*Intended as replacement for DIN 548 (2007-01).

Estado: Active / 2023-11

State of railway vehicles - Brake - Part 10: Function of emergency brake equipment and emergency brake override / Note: Date of issue 2023-09-29*Intended as replacement for DIN 27205-10 (2017-03).

Estado: Active / 2023-11

State of railway vehicles - Brake - Part 2: Disc brake, mechanical part / Note: Date of issue 2023-09-29*Intended as replacement for DIN 27205-2 (2017-03).

Estado: Active / 2023-11

Glass in building - Design and construction rules - Part 4: Additional requirements for barrier glazing / Note: Date of issue 2023-10-20*Intended as replacement for DIN 18008-4 (2013-07).

Estado: Active / 2023-11

Microbiological analysis of milk - Determination of Escherichia coli - Part 2: Membrane-agar method / Note: Date of issue 2023-10-13*Intended as replacement for DIN 10183-2 (1991-05).

Estado: Active / 2023-11

Lifting eye nuts / Note: Date of issue 2023-09-29*Intended as replacement for DIN 582 (2018-04).

Estado: Active / 2023-11

Cold rooms - Constructional safety requirements / Note: Date of issue 2023-09-29*Intended as replacement for DIN 8986 (2012-10).

Estado: Active / 2023-11

Slotted pan head screws with small head and full dog point / Note: Date of issue 2023-09-29*Intended as replacement for DIN 922 (2012-06).

Estado: Active / 2023-11

Round nuts with drilled holes in one face / Note: Date of issue 2023-10-06*Intended as replacement for DIN 547 (2006-08).

Estado: Active / 2023-11

Slotted round nuts / Note: Date of issue 2023-10-06*Intended as replacement for DIN 546 (2010-09).