Buscador de normas

Estado: Active / 2023-09-01

Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance

Estado: Active / 2023-09-01

Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)

Estado: Active / 2023-09-01

Standard Guide for Measurement of pH Below Resilient Flooring Installations

Estado: Active / 2023-09-01

Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing

Estado: Active / 2023-09-01

Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish

Estado: Active / 2023-09-01

Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)

Estado: Active / 2023-09-01

Standard Practice for Performing Cryo-Transmission Electron Microscopy of Liposomes

Estado: Active / 2023-09-01

Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)

Estado: Active / 2023-09-01

Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants

Estado: Active / 2023-09-01

Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations

Estado: Active / 2023-09-01

Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

Estado: Active / 2023-09-01

Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface

Estado: Active / 2023-08-15

Standard Specification for Diesel Fuel

Estado: Active / 2023-08-15

Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance

Estado: Active / 2023-08-01

Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials

Estado: Active / 2023-08-01

Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride

Estado: Active / 2023-08-01

Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies

Estado: Active / 2023-08-01

Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop

Estado: Active / 2023-08-01

Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V, 90 °C Operation

Estado: Active / 2023-07-01

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

Estado: Active / 2023-07-01

Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing

Estado: Active / 2023-07-01

Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

Estado: Active / 2023-07-01

Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)

Estado: Active / 2023-07-01

Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure

Estado: Active / 2023-07-01

Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass

Estado: Active / 2023-07-01

Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

Estado: Active / 2023-07-01

Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

Estado: Active / 2023-07-01

Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine

Estado: Active / 2023-07-01

Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

Estado: Active / 2023-07-01

Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine

Estado: Active / 2023-07-01

Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition

Estado: Active / 2023-07-01

Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area

Estado: Active / 2023-07-01

Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes

Estado: Active / 2023-07-01

Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

Estado: Active / 2023-07-01

Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques

Estado: Active / 2023-07-01

Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs

Estado: Active / 2023-07-01

Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

Estado: Active / 2023-07-01

Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction

Estado: Active / 2023-07-01

Standard Terminology Relating to Bioenergy and Industrial Chemicals from Biomass

Estado: Active / 2023-07-01

Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

Estado: Active / 2023-07-01

Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

Estado: Active / 2023-07-01

Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

Estado: Active / 2023-07-01

Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils

Estado: Active / 2023-07-01

Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

Estado: Active / 2023-07-01

Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres

Estado: Active / 2023-07-01

Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants

Estado: Active / 2023-07-01

Standard Guide for Studying Fire Incidents in Oxygen Systems

Estado: Active / 2023-07-01

Standard Guide for Developing and Implementing Interim and Early Actions for Waste Contamination Site Remediation

Estado: Active / 2023-07-01

Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

Estado: Active / 2023-07-01

Standard Terminology Relating to Gaseous Fuels