Saltar navegación principal
Estás en: Home>Normas>Buscador de normas

Para búsqueda de normas ISO, ASTM, IEC, IEEE, BSI, DIN, SAE y EN utilizar términos en inglés

Estado
Idioma
Buscador de normas

Buscador de normas

Resultados para:

Número de resultados: 149

UNE-EN 549:2020  UNE

Estado: Vigente / 2020-07-22

Materiales de caucho para juntas y membranas para aparatos y equipos que utilizan combustible gaseoso.

CTN 53/SC 1 ELASTÓMEROS

UNE 53616:2011  UNE

Estado: Vigente / 2020-01-01

Elastómeros. Materiales para juntas de elastómeros para luminarias. Características y métodos de ensayo.

CTN 53/SC 1 ELASTÓMEROS

UNE 53614:2012  UNE

Estado: Vigente / 2020-01-01

Elastómeros. Métodos de ensayo de juntas tóricas de elastómeros.

CTN 53/SC 1 ELASTÓMEROS

UNE-EN 14241-1:2014  UNE

Estado: Vigente / 2019-06-06

Chimeneas. Juntas y sellantes de estanquidad elastoméricos. Requisitos del material y métodos de ensayo. Parte 1: Juntas de estanquidad en conductos interiores.

CTN 123 CHIMENEAS

UNE-EN 682:2002  UNE

Estado: Vigente / 2009-09-11

Juntas elastoméricas. Requisitos de los materiales de juntas empleadas en tubos y accesorios para transporte de gases y fluidos hidrocarbonados.

CTN 53/SC 1 ELASTÓMEROS

UNE-EN ISO 21049:2006  UNE

Estado: Vigente / 2006-03-08

Bombas. Sistemas de estanquidad para bombas centrífugas y rotativas. (ISO 21049:2004)

CTN 62/SC 8 INDUSTRIAS DEL PETRÓLEO Y GAS

UNE-EN 682:2002/A1:2006  UNE

Estado: Vigente / 2006-02-15

Juntas elastoméricas. Requisitos de los materiales de juntas empleadas en tubos y accesorios para transporte de gases y fluidos hidrocarbonados.

CTN 53/SC 1 ELASTÓMEROS

ISO 3601-1:2012/Amd 1:2019  ISO

Estado: Published / 2019-09-02

Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes — Amendment 1

ISO 16010:2019  ISO

Estado: Published / 2019-08-28

Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids

ISO 3601-3:2005/Amd 1:2018  ISO

Estado: Published / 2018-12-03

Fluid power systems — O-rings — Part 3: Quality acceptance criteria — Amendment 1

ISO 9631:2018  ISO

Estado: Published / 2018-03-06

Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material

ISO 3601-2:2016  ISO

Estado: Published / 2016-07-19

Fluid power systems — O-rings — Part 2: Housing dimensions for general applications

ISO 3601-1:2012  ISO

Estado: Published / 2012-02-24

Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes

ISO 6194-3:2009  ISO

Estado: Published / 2009-11-17

Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 3: Storage, handling and installation

ISO 6194-4:2009  ISO

Estado: Published / 2009-03-11

Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 4: Performance test procedures

ISO 6194-5:2008  ISO

Estado: Published / 2008-04-07

Rotary-shaft lip-type seals incorporating elastomeric sealing elements — Part 5: Identification of visual imperfections

ISO 6194-1:2007  ISO

Estado: Published / 2007-09-13

Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 1: Nominal dimensions and tolerances

ISO 6119:2006  ISO

Estado: Published / 2006-07-26

Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

ISO 6118:2006  ISO

Estado: Published / 2006-07-13

Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)

ISO 4928:2006  ISO

Estado: Published / 2006-07-13

Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

ISO 4930:2006  ISO

Estado: Published / 2006-07-07

Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)

ISO 3601-3:2005  ISO

Estado: Published / 2005-11-10

Fluid power systems — O-rings — Part 3: Quality acceptance criteria

ISO 6117:2005  ISO

Estado: Published / 2005-07-06

Road vehicles — Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)

ISO 4927:2005  ISO

Estado: Published / 2005-06-22

Road vehicles — Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

ISO 21049:2004  ISO

Estado: Published / 2004-02-02

Pumps — Shaft sealing systems for centrifugal and rotary pumps

ISO 7986:1997  ISO

Estado: Published / 1997-07-24

Hydraulic fluid power — Sealing devices — Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications

ISO 7633:1985  ISO

Estado: Published / 1985-07-25

Road vehicles — Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

ISO 7630:1985  ISO

Estado: Published / 1985-06-20

Road vehicles — Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

ISO 7632:1985  ISO

Estado: Published / 1985-06-13

Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

ISO 7631:1985  ISO

Estado: Published / 1985-05-02

Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

ISO 3934  ISO

Estado: Draft (Under Publication) / 2021-09-09

Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods

ISO 16589-1:2011/Amd 1:2018  ISO

Estado: Published / 2018-11-22

Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances — Amendment 1

ISO 4633:2015  ISO

Estado: Published / 2015-06-03

Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials

ISO 3601-5:2015  ISO

Estado: Published / 2015-03-26

Fluid power systems — O-rings — Part 5: Specification of elastomeric materials for industrial applications

ISO 5892:2013  ISO

Estado: Published / 2013-06-03

Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification

ISO 3601-1:2012/Cor 1:2012  ISO

Estado: Published / 2012-07-13

Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes — Technical Corrigendum 1

ISO 16589-2:2011  ISO

Estado: Published / 2011-11-24

Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 2: Vocabulary

ISO 16589-3:2011  ISO

Estado: Published / 2011-04-07

Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage, handling and installation

ISO 16589-4:2011  ISO

Estado: Published / 2011-04-07

Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures

ISO 16589-5:2011  ISO

Estado: Published / 2011-04-07

Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 5: Identification of visual imperfections

ISO 16589-1:2011  ISO

Estado: Published / 2011-04-07

Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances

ISO 4635:2011  ISO

Estado: Published / 2011-02-03

Rubber, vulcanized — Preformed joint seals for use between concrete paving sections of highways — Specification

ISO 6194-2:2009  ISO

Estado: Published / 2009-03-24

Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 2: Vocabulary

ISO 27996:2009  ISO

Estado: Published / 2009-02-03

Aerospace fluid systems — Elastomer seals — Storage and shelf life

ISO 3601-4:2008  ISO

Estado: Published / 2008-05-27

Fluid power systems — O-rings — Part 4: Anti-extrusion rings (back-up rings)

ISO 23711:2003  ISO

Estado: Published / 2003-11-26

Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers

ISO 3934:2002  ISO

Estado: Published / 2002-09-05

Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods

ISO 9553:1997  ISO

Estado: Published / 1997-10-16

Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors

ISO 3939:1977  ISO

Estado: Published / 1977-03-01

Fluid power systems and components — Multiple lip packing sets — Methods for measuring stack heights

DIN EN 549:2019-09  DIN

Estado: Active / 2019-09

Rubber materials for seals and diaphragms for gas appliances and gas equipment; German version EN 549:2019 / Note: This standard is part of the DVGW body of rules.

Número de resultados: 149

Lo más vendido

Normas
Libros