Buscador de normas

Estado: Vigente / 2008-12-22

Envases y embalajes. Bidones de acero. Parte 1: Bidones con tapa desmontable (abiertos) con una capacidad mínima de 208 l, 210 l y 216,5 l. (ISO 15751-1:2002)

Estado: Vigente / 2008-12-22

Envases y embalajes. Bidones de acero. Parte 2: Bidones con tapa fija (cerrados) con una capacidad total mínima de 212 l, 216,5 l y 230 l (ISO 15750-2:2002).

Estado: Vigente / 2008-12-22

Envases y embalajes. Bidones de acero. Parte 3: Sistemas de cierre del tipo brida insertada.(ISO 15750-3:2002)

Estado: Vigente / 2001-06-18

Bidones de acero. Bidones de boca ancha con tapa desmontable con una capacidad nominal comprendida entre 15 litros y 62 litros.

Estado: Vigente / 2001-06-18

Bidones de acero. Bidones cerrados con tapón con una capacidad nominal comprendida entre 20 l y 60 l.

Estado: Vigente / 2019-10-16

Envases y embalajes. Bidones de plástico. Parte 3: Sistemas de cierre con tapón para bidones de plástico con una capacidad nominal de 113,6 l a 220 l. (ISO 20848-3:2018).

Estado: Vigente / 2010-04-14

Bidones de plástico. Bidones de cabeza no desmontable (cabeza hermética) con una capacidad nominal de 210 l y 225 l.

Estado: Vigente / 2010-04-14

Bidones de plástico. Bidones de cabeza desmontable con una capacidad nominal de 25 l a 60 l.

Estado: Vigente / 2008-11-26

Envases y embalajes. Bidones de plástico. Parte 1: Bidones de boca ancha con tapa desmontable con una capacidad nominal de 113,6 l a 220 l. (ISO 20848-1:2006)

Estado: Vigente / 2008-11-26

Envases y embalajes. Bidones de plástico. Parte 2: Bidones de boca ancha con tapa no desmontable con una capacidad nominal de 208,2 l y 220 l. (ISO 20848-2:2006)

Estado: Vigente / 2006-07-31

Bidones de cartón. Bidones de tapadera desmontable (extremo abierto) con flejes de cierre con una capacidad nominal de 15 l a 250 l.

Estado: Vigente / 2003-02-14

Contenedores de plástico rígidos. Definición de la capacidad nominal, de rebosamiento y total y medición de la capacidad total y de rebosamiento.

Estado: Vigente / 2003-02-14

Contenedores de plástico rígidos. Método para la determinación de la aptitud al drenaje.

Estado: Vigente / 2003-02-14

Recipientes de plástico rígidos. Especificación de tolerancias en dimensiones, peso y volumen.

Estado: Vigente / 2001-04-30

Garrafas de plástico. Garrafas con una capacidad nominal de 20 l a 60 l para la utilización óptima de palets de 800 mm x 1 200 mm, 1 000 mm x 1 200 mm y 1 140 mm x 1 140 mm.

Estado: Vigente / 2001-04-30

Bidones de plástico. Bidones de cabeza no desmontable (cabeza hermética) de sección transversal circular con una capacidad nominal de 20 l a 120 l.

Estado: Vigente / 2001-04-30

Sistemas de cierre con tapón roscado para recipientes de plástico con una capacidad nominal de 20 l a 60 l.

Estado: PUBLISHED / 2022-05-20

Packaging — Steel drums — Part 3: Inserted flange-type closure systems

Estado: PUBLISHED / 2018-11-27

Packaging — Plastics drums — Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l

Estado: PUBLISHED / 2014-05-12

Plastics — Blow-moulded polypropylene containers for packaging of liquid foodstuffs

Estado: PUBLISHED / 2006-09-18

Packaging — Plastics drums — Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l

Estado: PUBLISHED / 2006-09-18

Packaging — Plastics drums — Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l

Estado: PUBLISHED / 2002-05-16

Packaging — Steel drums — Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l

Estado: PUBLISHED / 2002-05-16

Packaging — Steel drums — Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l

Estado: Active / 2022-12

Packaging - Steel drums - Part 3: Inserted flange-type closure systems (ISO 15750-3:2022); German version EN ISO 15750-3:2022

Estado: Active / 2020-07

Means of packaging - Cylindrical beverage containers - Part 1: Allowable operating pressure up to 0,3 MPa, nominal volume up to 50 l / Note: DIN 6647-1 (2006-12) remains valid alongside this standard until 2020-12-31.

Estado: Active / 2020-07

Means of packaging - Cylindrical beverage containers - Part 2: Allowable operating pressure up to 0,7 MPa, nominal volume up to 50 l / Note: DIN 6647-2 (2006-12) remains valid alongside this standard until 2020-12-31.

Estado: Active / 2020-07

Means of package - Cylindrical beverage containers - Part 3: Allowable operating pressure up to 0,3 MPa, nominal volume greater 100 l / Note: DIN 6647-3 (2003-08) remains valid alongside this standard until 2020-12-31.

Estado: Active / 2020-07

Means of packaging - Cylindrical beverage containers - Part 4: Disposal pack with allowable operating pressure up to 0,4 MPa, nominal volume up to 60 l / Note: DIN 6647-4 (2011-11) remains valid alongside this standard until 2020-12-31.

Estado: Active / 2019-06

Packaging - Plastics drums - Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2018); German version EN ISO 20848-3:2018

Estado: Active / 2014-05

Food hygiene - Containers for liquid, granulated and powdered foodstuffs - Part 2: Cleaning and disinfection

Estado: Active / 2013-03

Means of packaging - Non-removable head (tight head) and removable head (open head) drums made of steel - Drop handle

Estado: Active / 2010-08

Packaging - Radio-frequency identification of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 1: General

Estado: Active / 2010-08

Packaging - Radio-frequency identification of rigid industrial packaging, positioning and system parameters for passive RFID chips - Part 3: Removable head (open head) steel drum without plug/bung closure system of total capacity exceeding 200 l

Estado: Active / 2009-12

Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l; German version EN 12707:2009

Estado: Active / 2009-10

Plastics drums - Removable head (open head) drums with a nominal capacity of 25 l to 60 l; German version EN 12714:2009

Estado: Active / 2008-09

Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l (ISO 15750-2:2002); German version EN ISO 15750-2:2008

Estado: Active / 2008-09

Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l (ISO 15750-1:2002); German version EN ISO 15750-1:2008

Estado: Active / 2008-09

Packaging - Plastics drums - Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-1:2006); German version EN ISO 20848-1:2008

Estado: Active / 2008-09

Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l (ISO 20848-2:2006); German version EN ISO 20848-2:2008

Estado: Active / 2006-08

Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l; German version EN 12710:2006

Estado: Active / 2006-01

Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml; German version EN 13025-3:2005

Estado: Active / 2006-01

Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml; German version EN 13025-2:2005

Estado: Active / 2005-06

Fibreboard drums - Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l; German version EN 14768:2005

Estado: Active / 2003-01

Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity; German version EN 13972:2002

Estado: Active / 2000-10

Packaging - Fibreboard drums - Bottom and lid made of steel

Estado: Active / 2000-03

Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l; German version EN 12713:2000

Estado: Active / 2000-03

Plastic jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilisation of pallets 800 mm × 1200 mm, 1000 mm × 1200 mm und 1140 mm × 1140 mm; German version EN 12712:2000

Estado: Active / 2000-03

Plastic drums - Non-removable head (tight head) circular cross section drums with a nominal capacity of 20 l to 120 l; German version EN 12709:2000

Estado: Active / 2000-03

Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l; German version EN 13008:1999