Saltar navegación principal
Estás en: Home>Normas>Buscador de normas

Para búsqueda de normas ISO, ASTM, IEC, IEEE, BSI, DIN, SAE y EN utilizar términos en inglés

Estado
Idioma
Buscador de normas

Buscador de normas

Resultados para:

Número de resultados: 267

UNE-EN ISO 4231:2017  UNE

Estado: Vigente / 2017-02-22

Terrajes de cojinete redondo de roscar, a mano y a máquina, para roscas cilíndricas de tubos. Serie G. (ISO 4231:2016).

CTN 16 HERRAMIENTAS

UNE-EN ISO 4230:2017  UNE

Estado: Vigente / 2017-02-22

Terrajes de cojinete redondo de roscar, a mano y a máquina, para roscas cónicas de tubos. Serie R. (ISO 4230:2016).

CTN 16 HERRAMIENTAS

UNE 16603:1991  UNE

Estado: Vigente / 2012-01-12

Machos de roscar. Denominaciones de los tipos principales y terminología.

CTN 16 HERRAMIENTAS

UNE 16604:1991  UNE

Estado: Vigente / 2012-01-12

Cojinetes redondos para roscar. Vocabulario y terminología.

CTN 16 HERRAMIENTAS

UNE 16606:1991  UNE

Estado: Vigente / 2012-01-12

Cojinetes circulares para roscar a mano y a máquina y portacojinetes manuales.

CTN 16 HERRAMIENTAS

UNE 16605:1991  UNE

Estado: Vigente / 2012-01-12

Machos para roscar rectificados para roscas métricas ISO con campos de tolerancias 4H a 8H y 4G a 6G para roscas regulares y de precisión. Tolerancias de fabricación de la pieza de rosca.

CTN 16 HERRAMIENTAS

ISO 529:2017  ISO

Estado: Published / 2017-03-06

Short machine taps and hand taps

ISO 2284:2017  ISO

Estado: Published / 2017-02-24

Hand taps for parallel and taper pipe threads — General dimensions and marking

ISO 4231:2016  ISO

Estado: Published / 2016-10-14

Hand- and machine-operated circular screwing dies for parallel pipe threads — G series

ISO 4230:2016  ISO

Estado: Published / 2016-10-06

Hand- and machine-operated circular screwing dies for taper pipe threads — R series

ISO 8051:2016  ISO

Estado: Published / 2016-09-19

Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess

ISO 2283:2000  ISO

Estado: Published / 2000-03-23

Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in — Reduced shank taps

ISO 8830:1991  ISO

Estado: Published / 1991-10-17

High-speed steel machine taps with ground threads — Technical specifications

ISO 5969:1979/Cor 1:1991  ISO

Estado: Published / 1991-01-01

Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion — Technical Corrigendum 1

ISO 2857:1973/Cor 1:1990  ISO

Estado: Published / 1990-10-12

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Technical Corrigendum 1

ISO 2568:1988  ISO

Estado: Published / 1988-11-24

Hand- and machine-operated circular screwing dies and hand-operated die stocks

ISO 7226:1988  ISO

Estado: Published / 1988-05-19

Hexagonal dienuts

ISO 2857:1973/Amd 2:1986  ISO

Estado: Published / 1986-09-25

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2

ISO 2857:1973/Amd 1:1984  ISO

Estado: Published / 1984-07-01

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1

ISO 5407:1981  ISO

Estado: Published / 1981-10-01

As-sintered hardmetal pellets used in heading dies — Dimensions and tolerances

ISO 5969:1979  ISO

Estado: Published / 1979-10-01

Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion

ISO 2857:1973  ISO

Estado: Published / 1973-12-01

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion

ISO 5968:1981  ISO

Estado: Published / 1981-09-01

Circular screwing dies — Terminology

ISO 5967:1981  ISO

Estado: Published / 1981-08-01

Taps and thread cutting — Nomenclature of the main types and terminology

ISO 5396:1977  ISO

Estado: Published / 1977-12-01

Hardmetal heading dies — Terminology

DIN 382:2020-11  DIN

Estado: Active / 2020-11

Hexagonal die-nuts - Dimensions, designation, material, type and labelling for hexagonal high-speed steel dies

DIN 4003-80:2019-03  DIN

Estado: Active / 2019-03

Concept for the design of 3D models based on properties according to DIN 4000 - Part 80: Screwing tabs, cold forming taps and screwing dies / Note: Applies in conjunction with DIN 4000-80 (2019-03), DIN 4003-1 (2017-10).

DIN 4000-80:2019-03  DIN

Estado: Active / 2019-03

Tabular layouts of properties - Part 80: Screwing taps, cold forming taps and screwing dies

DIN 40433:2008-11  DIN

Estado: Active / 2018-11

Machine taps for steel conduit thread Pg 7 to Pg 48

DIN 40432:2008-11  DIN

Estado: Active / 2018-11

Sets of taps - Sets of 2 taps for steel conduit thread Pg 7 to Pg 48

DIN 5156:2008-11  DIN

Estado: Active / 2018-11

Machine taps for pipe threads G 1/16 to G 2 and Rp 1/16 to Rp 2

DIN 2189:2008-11  DIN

Estado: Active / 2018-11

Cold-forming taps for pipe threads G 1/16 to G 1 - Dimensions

DIN 2174:2008-11  DIN

Estado: Active / 2018-11

Cold-forming taps for ISO metric coarse pitch thread M2 to M39 and ISO metric fine pitch thread M3 × 0,25 to M52 × 4 - Dimensions

DIN EN ISO 4230:2017-03  DIN

Estado: Active / 2017-03

Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016); German version EN ISO 4230:2016

DIN EN ISO 4231:2017-03  DIN

Estado: Active / 2017-03

Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016); German Version EN ISO 4231:2016

DIN 802-3:2016-03  DIN

Estado: Active / 2016-03

Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion

DIN 357:2016-02  DIN

Estado: Active / 2016-02

Machine nut taps for coarse pitch metric ISO-threads M3 to M68

DIN 376:2016-02  DIN

Estado: Active / 2016-02

Machine screwing taps for coarse pitch metric ISO-threads M1,6 to M68

DIN 374:2016-01  DIN

Estado: Active / 2016-01

Machine screwing taps for fine pitch metric ISO-threads M3 × 0,2 to M52 × 4

DIN 371:2016-01  DIN

Estado: Active / 2016-01

Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0,2 to M10 × 1,25

DIN 352:2016-01  DIN

Estado: Active / 2016-01

Sets of taps - Sets of 3 taps for metric coarse ISO-threads M1 to M68

DIN 2181:2015-09  DIN

Estado: Active / 2015-09

Sets of 2 taps for metric fine ISO-threads M1 × 0,2 to M52 × 4

DIN 2175-1:2015-03  DIN

Estado: Active / 2015-03

Cold-forming taps - Part 1: Technical delivery conditions for high-speed steel cold-forming taps

DIN 2175-2:2015-03  DIN

Estado: Active / 2015-03

Cold-forming taps - Part 2: Technical delivery conditions for carbide cold-forming taps

DIN 2197-1:2015-03  DIN

Estado: Active / 2015-03

Screwing taps - Part 1: Technical delivery conditions for ground high-speed steel taps

DIN 2197-2:2015-03  DIN

Estado: Active / 2015-03

Screwing taps - Part 2: Technical delivery conditions for ground carbide taps

DIN 2184-1:2015-02  DIN

Estado: Active / 2015-02

Taps and cold forming taps - Part 1: Long type; General plan of dimensions

DIN 2184-2:2003-12  DIN

Estado: Active / 2013-12

Taps and cold forming taps - Part 2: Short type; General plan of dimensions

DIN 336:2003-07  DIN

Estado: Active / 2013-07

Diameters of drills for minor diameters of tapped threads

DIN 40435:2003-07  DIN

Estado: Active / 2013-07

Machine taps for the tapped holes (EG) for wire thread inserts for ISO metric screw threads according to DIN 8140 - Coarse pitch threads EG M2 to EG M52 and fine pitch threads EG M8 × 1 to EG M48 × 3 - Dimensions

Número de resultados: 267

Lo más vendido

Normas
Libros