Buscador de normas

Estado: Active / 2023-03

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022); German version EN ISO 11296-9:2022

Estado: Active / 2022-09

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022); German and English version prEN ISO 13268:2022 / Note: Date of issue 2022-08-19*Intended as replacement for DIN EN 14982 (2011-01).

Estado: Active / 2022-09

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022); German and English version prEN ISO 13266:2022 / Note: Date of issue 2022-08-19*Intended as replacement for DIN EN 14802 (2006-03).

Estado: Active / 2022-09

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022); German and English version prEN ISO 13267:2022 / Note: Date of issue 2022-08-19*Intended as replacement for DIN EN 14830 (2007-01).

Estado: Active / 2022-07

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings; German version CEN/TS 17176-3:2022

Estado: Active / 2022-05

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013 + Amd 1:2018 + Amd 2:2021); German and English version EN ISO 15874-3:2013 + A1:2018 + A2:2021 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2022-05

Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017 + Amd 1:2020 + Amd 2:2021); German and English version EN ISO 15876-3:2017 + A1:2020 + A2:2021 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2022-05

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009 + Amd 1:2020 + Amd 2:2021); German and English version EN ISO 22391-3:2009 + A1:2020 + A2:2021 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2022-04

Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021); German version EN ISO 11298-4:2021 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2022-03

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003 + Amd 1:2020 + Amd 2:2021); German and English version EN ISO 15875-3:2003 + A1:2020 + A2:2021 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2021-12

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings; German version EN 1555-3:2021 / Note: Applies in conjunction with DIN EN 1555-1 (2021-12), DIN EN 1555-2 (2021-12), DIN EN 1555-4 (2021-12), DIN EN 1555-5 (2021-12).

Estado: Active / 2021-11

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018 + Amd 1:2021); German version EN ISO 11296-4:2018 + A1:2021

Estado: Active / 2021-11

Plastics piping systems - Environmental product declarations - Product Category Rules complementary to EN 15804, for buried plastics piping systems; German and English version prEN 16903:2021 / Note: Date of issue 2021-10-22

Estado: Active / 2021-11

Plastics piping systems - Environmental product declarations - Product Category rules complementary to EN 15804, for plastic piping systems inside buildings; German and English version prEN 16904:2021 / Note: Date of issue 2021-10-22

Estado: Active / 2021-05

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings; German and English version prEN 12201-3:2021 / Note: Date of issue 2021-04-02*Intended as replacement for DIN EN 12201-3 (2013-01).

Estado: Active / 2020-11

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity; German version CEN/TS 17176-7:2020 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2020-01

Plastics piping systems for drainage and sewerage without pressure - Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) - Dimensions, requirements and tests (ISO 16611:2017)

Estado: Active / 2019-10

Pipes and fittings made of unfilled, non-reinforced and crosslinked polyethylene (PE-X) - Determination of the degree of crosslinking through rheological measurement of the storage modulus; Text in German and English

Estado: Active / 2019-07

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General; German version EN 17176-1:2019 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2019-07

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system; German version EN 17176-5:2019 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2019-06

Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018); German version EN ISO 21225-1:2018 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2019-06

Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018); German version EN ISO 21225-2:2018 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2019-05

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018); German version EN ISO 11297-3:2018

Estado: Active / 2019-05

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018); German version EN ISO 11296-3:2018

Estado: Active / 2019-04

Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018); German version EN ISO 11299-1:2018 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2019-04

Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018); German version EN ISO 11299-2:2018 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2019-04

Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018); German version EN ISO 11299-3:2018 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2018-12

Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018); German version EN ISO 11298-3:2018 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2018-12

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011); German version EN ISO 19893:2018

Estado: Active / 2018-11

Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for ducting - Dimensions and technical delivery conditions / Note: Date of issue 2018-09-28*Intended as replacement for DIN 16875 (2013-03).

Estado: Active / 2018-09

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018); German version EN ISO 11296-1:2018

Estado: Active / 2018-09

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018); German version EN ISO 11297-1:2018

Estado: Active / 2018-09

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018); German version EN ISO 11297-4:2018

Estado: Active / 2018-08

Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 1: Classification and dimensions

Estado: Active / 2018-08

Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications

Estado: Active / 2018-07

Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018); German version EN ISO 11298-1:2018

Estado: Active / 2018-05

Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018); German version EN ISO 11298-2:2018 / Note: This standard is part of the DVGW body of rules.

Estado: Active / 2018-01

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995); German version EN ISO 2507-2:2017

Estado: Active / 2018-01

Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995); German version EN ISO 2507-3:2017

Estado: Active / 2018-01

Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995); German version EN ISO 2507-1:2017

Estado: Active / 2018-01

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010); German version EN ISO 13262:2017

Estado: Active / 2018-01

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010); German version EN ISO 13264:2017

Estado: Active / 2018-01

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010); German version EN ISO 13263:2017

Estado: Active / 2015-08

Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure (ISO 3458:2015); German and English version EN ISO 3458:2015

Estado: Active / 2015-06

Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015); German and English version EN ISO 3503:2015

Estado: Active / 2015-06

Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015); German version EN ISO 17778:2015

Estado: Active / 2014-12

Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL); German version EN 16506:2014

Estado: Active / 2013-03

Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for ducting - Dimensions and technical delivery conditions / Note: To be replaced by DIN 16875 (2018-11).

Estado: Active / 2013-03

Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content (ISO 10147:2011); German and English version EN ISO 10147:2012

Estado: Active / 2013-01

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings; German version EN 12201-3:2011+A1:2012 / Note: To be replaced by DIN EN 12201-3 (2021-05).