Saltar navegación principal
Estás en: Home>Normas>Buscador de normas

Para búsqueda de normas ISO, ASTM, IEC, IEEE, BSI, DIN , SAE y EN utilizar términos en inglés

Estado
Idioma
Buscador de normas

Buscador de normas

Resultados para:

Número de resultados: 567

Estado: Vigente / 2020-06-01

Cribado de elementos mediante esfuerzos. Parte 2: Componentes. (Ratificada por la Asociación Española de Normalización en junio de 2020.)

Estado: Vigente / 2020-04-01

Ensayo de confiabilidad. Planes de ensayo de conformidad para el índice de éxito (Ratificada por la Asociación Española de Normalización en abril de 2020.)

Estado: Vigente / 2012-03-07

Crecimiento de la fiabilidad. Ensayos de esfuerzo para revelar fallos infantiles en sistemas complejos únicos.

Estado: Vigente / 2010-04-07

Cribado de elementos mediante esfuerzos. Parte 1: Elementos reparables fabricados en lotes.

Estado: Vigente / 2000-09-04

Equipos de tratamiento térmico industrial. Parte 4: Requisitos particulares de seguridad para los equipos de tratamiento térmico de galvanizado en caliente.

Estado: Vigente / 1978-04-15

Fiabilidad de equipos y componentes electrónicos. Guía para el análisis estadístico de los datos de ensayos de envejecimiento. Métodos basados en los valores medios de resultados de ensayos distribuidos normalmente.

Estado: Active / 2022-09

Tabular layouts of properties - Part 192: Positioning elements / Note: Date of issue 2022-08-19

Estado: Active / 2022-09

Tabular layouts of properties - Part 143: Pinion type cutters with bore or shank / Note: Date of issue 2022-08-19*Intended as replacement for DIN 4000-143 (2016-09).

Estado: Active / 2022-09

Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears / Note: Date of issue 2022-08-19*Intended as replacement for DIN 4000-141 (2016-10).

Estado: Active / 2022-08

Tabular layouts of properties - Part 77: Cutting inserts for profiling and shaping / Note: Date of issue 2022-07-15*Intended as replacement for DIN 4000-77 (2011-12).

Estado: Active / 2022-08

Concept for the design of 3D models based on properties according to DIN 4000 - Part 77: Cutting inserts for profiling and shaping / Note: Date of issue 2022-07-15*Applies in conjunction with DIN 4000-77 (2022-08).*Intended as replacement for DIN 4003-77 (2013-02).

Estado: Active / 2021-11

Concept for the design of 3D models based on properties according to DIN 4000 - Part 88: Milling cutter with arbor hole for indexable inserts / Note: Applies in conjunction with DIN 4000-88 (2021-11), DIN 4003-1 (2017-10).

Estado: Active / 2021-11

Tabular layouts of properties - Part 88: Milling cutter with arbor hole for indexable inserts

Estado: Active / 2021-10

Concept for the design of 3D models based on properties according to DIN 4000 - Part 87: End mills for indexable inserts

Estado: Active / 2021-10

Tabular layouts of properties - Part 87: End mills for indexable inserts

Estado: Active / 2021-07

Tabular layouts of properties - Part 210: Cutting machine tools; Corrigendum 1

Estado: Active / 2021-06

Concept for the design of 3D models based on properties according to DIN 4000 - Part 210: Cutting machine tools / Note: Applies in conjunction with DIN 4000-210 (2015-08), DIN 4003-1 (2017-10).

Estado: Active / 2021-06

Tabular layouts of properties - Part 96: Interface coding for clamping elements for radial and linear force application

Estado: Active / 2021-06

Tabular layouts of properties - Part 191: Clamping elements

Estado: Active / 2021-05

Tabular layouts of properties - Part 102: Data exchange for tabular layouts of properties with XML schema

Estado: Active / 2020-11

Tabular layouts of properties - Part 76: Inserts, indexable

Estado: Active / 2020-11

Concept for the design of 3D models based on properties according to DIN 4000 - Part 76: Inserts, indexable

Estado: Active / 2020-07

Tabular layouts of properties - Part 190: Clamping devices

Estado: Active / 2020-07

Concept for the design of 3D models based on properties according to DIN 4000 - Part 190: Clamping devices / Note: Applies in conjunction with DIN 4000-190 (2020-07), DIN 4003-1 (2017-10).

Estado: Active / 2020-03

Concept for the design of 3D models based on properties according to DIN 4000 - Part 82: End mills with non-indexable cutting edges / Note: Applies in conjunction with DIN 4000-82 (2020-03), DIN 4003-1 (2017-10).

Estado: Active / 2020-03

Tabular layouts of properties - Part 82: End mills with non-indexable cutting edges

Estado: Active / 2020-03

Concept for the design of 3D models based on properties according to DIN 4000 - Part 83: Milling cutter with arbor hole and non-indexable cutting edges / Note: Applies in conjunction with DIN 4000-83 (2020-03), DIN 4003-1 (2017-10).

Estado: Active / 2020-03

Tabular layouts of properties - Part 83: Milling cutter with arbor hole and non-indexable cutting edges

Estado: Active / 2020-02

Reliability testing - Compliance test plans for success ratio (IEC 56/1831/CDV:2019); German and English version prEN IEC 61123:2019 / Note: Date of issue 2020-01-31*Intended as replacement for DIN IEC 61123 (1993-08).

Estado: Active / 2019-03

Tabular layouts of properties - Part 80: Screwing taps, cold forming taps and screwing dies

Estado: Active / 2019-03

Concept for the design of 3D models based on properties according to DIN 4000 - Part 80: Screwing tabs, cold forming taps and screwing dies / Note: Applies in conjunction with DIN 4000-80 (2019-03), DIN 4003-1 (2017-10).

Estado: Active / 2019-03

Tabular layouts of properties - Part 1: Concepts and principles

Estado: Active / 2018-12

Concept for the design of 3D models based on properties according to DIN 4000 - Part 90: Tool holders for indexable inserts / Note: Applies in conjunction with DIN 4000-90 (2011-12), DIN 4003-1 (2017-10).

Estado: Active / 2018-12

Tabular layouts of properties - Part 90: Tool holders for indexable inserts

Estado: Active / 2018-11

Aerospace series - General Principles of Obsolescence Management of chemicals, materials and processes; German and English version EN 9278:2018

Estado: Active / 2017-11

Tabular layouts of properties - Part 180: Tool assemblies

Estado: Active / 2017-11

Concept for the design of 3D models based on properties according to DIN 4000 - Part 180: Tool assemblies / Note: Applies in conjunction with DIN 4000-180 (2017-11), DIN 4003-1 (2017-10).

Estado: Active / 2017-11

Concept for the design of 3D models based on properties according to DIN 4000 - Part 86: Drills and counter sinking tools for indexable inserts / Note: Applies in conjunction with DIN 4000-86 (2017-11), DIN 4003-1 (2017-10).

Estado: Active / 2017-11

Tabular layouts of properties - Part 86: Drills and counter sinking tools for indexable inserts

Estado: Active / 2017-10

Concept for the design of 3D models based on properties according to DIN 4000 - Part 1: Overview and fundamental principles / Note: Applies in conjunction with DIN 4003 Reihe.

Estado: Active / 2017-10

Tabular layouts of properties - Part 140: Toothing system data of work pieces; Amendment 1

Estado: Active / 2017-09

Tabular layouts of properties - Part 81: Drills and countersinking tools with non-indexable cutting edges

Estado: Active / 2017-09

Concept for the design of 3D models based on properties according to DIN 4000 - Part 81: Drills and counter sinking tools with non-indexable cutting edges / Note: Applies in conjunction with DIN 4000-81 (2017-09), DIN 4003-1 (2014-02).

Estado: Active / 2017-05

Tabular layouts of properties - Part 145: Broaching tools for cylindrical gears

Estado: Active / 2017-05

Tabular layout of properties - Part 162: Washers and rings

Estado: Active / 2016-12

Concept for the design of 3D models based on properties according to DIN 4000 - Part 179: Deburring tools / Note: Applies in conjunction with DIN 4000-179 (2016-12), DIN 4003-1 (2014-02).

Estado: Active / 2016-12

Concept for the design of 3D models based on properties according to DIN 4000 - Part 175: Cassettes, nests and cartridges for indexable inserts / Note: Applies in conjunction with DIN 4000-175 (2015-06), DIN 4003-1 (2014-02).

Estado: Active / 2016-12

Concept for the design of 3D models based on properties according to DIN 4000 - Part 178: Probing systems, stylus systems and styli / Note: Applies in conjunction with DIN 4000-178 (2016-12), DIN 4003-1 (2014-02).

Estado: Active / 2016-12

Tabular layouts of properties - Part 178: Probing systems, stylus systems and styli

Estado: Active / 2016-12

Tabular layouts of properties - Part 179: Deburring tools

Número de resultados: 567

Lo más vendido

Normas
Libros