Saltar navegación principal
Estás en: Home>Normas>Buscador de normas

Para búsqueda de normas ISO, ASTM, IEC, IEEE, BSI, DIN , SAE y EN utilizar términos en inglés

Estado
Idioma
Buscador de normas

Buscador de normas

Resultados para:

Número de resultados: 130

Estado: Active / 2022-05

Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019); Text in German and English

Estado: Active / 2021-07

Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (ISO 2859-2:2020)

Estado: Active / 2021-04

Control charts - Part 2: Shewhart control charts (ISO 7870-2:2013)

Estado: Active / 2021-01

Control charts - Part 1: General guidelines (ISO 7870-1:2019)

Estado: Active / 2020-09

Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English

Estado: Active / 2020-06

Statistical methods in process management - Capability and performance - Part 7: Capability of measurement processes (ISO/DIS 22514-7:2020); Text in German and English / Note: Date of issue 2020-05-22

Estado: Active / 2019-07

Statistical methods in process management - Capability and performance - Part 2: Process capability and performance of time-dependent process models (ISO 22514-2:2017); Text in German and English

Estado: Active / 2019-02

Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality (ISO 28593:2017); Text in German and English

Estado: Active / 2017-08

Mathematical expressions for reliability, availability, maintainability and maintenance support terms (IEC 61703:2016); German version EN 61703:2016 / Note: DIN EN 61703 (2002-09) remains valid alongside this standard until 2019-09-16.

Estado: Active / 2016-08

Statistical methods in process management - Capability and performance - Part 1: General principles and concepts (ISO 22514-1:2014); Text in German and English

Estado: Active / 2016-06

Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2013); Text in German and English

Estado: Active / 2014-08

Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 + Cor. 1:2001 + Amd.1:2011); Text in German and English

Estado: Active / 2014-04

Use of control charts in the production of concrete; English version CEN/TR 16369:2012

Estado: Active / 2013-12

Statistics - Vocabulary and symbols - Part 2: Applied statistics (ISO 3534-2:2006); Text in German and English

Estado: Active / 2012-02

Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results (ISO/TR 22971:2005); Text in German and English

Estado: Active / 2010-08

Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases (ISO 11843-5:2008); Text in German and English

Estado: Active / 2009-12

Statistical interpretation of data - Part 8: Determination of prediction intervals (ISO 16269-8:2004); Text in German and English

Estado: Active / 2009-10

Statistical methods - Guidelines for the evaluation of conformity with specified requirements - Part 1: General principles (ISO 10576-1:2003); Text in German and English

Estado: Active / 2009-10

Statistics - Vocabulary and symbols - Part 1: General statistical terms and terms used in probability (ISO 3534-1:2006); Text in German and English

Estado: Active / 2009-03

Weibull analysis (IEC 61649:2008); German version EN 61649:2008

Estado: Active / 2008-06

Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000), Corrigenda to DIN ISO 11843-2:2006-06 (ISO 11843-2:2000/Cor. 1:2007; text in German, English)

Estado: Active / 2007-10

Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures (ISO 2859-3:2005); Text in German, English

Estado: Active / 2007-08

Statistical interpretation of data - Part 7: Median - Estimation and confidence intervals (ISO 16269-7:2001); Text in German, English

Estado: Active / 2006-06

Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English)

Estado: Active / 2006-06

Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value (ISO 11843-4:2003; text in German, English)

Estado: Active / 2006-06

Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used (ISO 11843-3:2003; text in German, English)

Estado: Active / 2006-04

Statistical aspects of sampling from bulk materials - Part 1: General principles (ISO 11648-1:2003)

Estado: Active / 1998-09

Corrigenda to DIN ISO 5725-1:1997-11 (ISO 5725-1:1994/Cor. 1:1998)

Estado: Active / 1997-11

Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994)

Estado: Active / 1996-03

Basic specification: CECC assessed process average procedure - 60% confidence limit; German version EN 100014:1991

Estado: Active / 1994-03

Sampling; practical execution

Estado: Active / 1987-03

Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites; example of calculation

Estado: Active / 1987-03

Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites

PNE-ISO 3951-1  Proyecto

Estado: Tramitación / 2017-09-20

Procedimientos de muestreo para la inspección por variables. Parte 1: Especificaciones para los planes de muestreo simples tabulados según el nivel de calidad aceptable (NCA) para la inspección lote por lote para una característica de calidad única y un nivel de calidad aceptable (NCA) único.

PNE-ISO 3951-2  Proyecto

Estado: Tramitación / 2017-09-20

Procedimientos de muestreo para la inspección por variables. Parte 2: Especificación general para los planes de muestreo simples tabulados según el nivel de calidad aceptable (NCA) para la inspección lote por lote de características de calidad independientes.

PNE-ISO 22514-4  Proyecto

Estado: Tramitación / 2017-09-20

Métodos estadísticos en la gestión de procesos. Capacidad y rendimiento. Parte 4: Estimaciones de la capacidad de procesos y medidas de desempeño

PNE-ISO 11462-2  Proyecto

Estado: Tramitación / 2016-12-20

Directrices para la implementación del control estadístico de procesos (CEP). Parte 2: Catálogo de herramientas y técnicas

PNE-ISO 11453  Proyecto

Estado: Tramitación / 2012-12-20

Interpretación estadística de datos. Contrastes e intervalos de confianza relativos a proporciones

Estado: Tramitación / 2022-01-09

Ensayos de fiabilidad. Ensayos de conformidad para tasa de fallo constante y para intensidad de fallo constante.

PNE-ISO 10017  Proyecto

Estado: Tramitación / 2020-06-14

Gestión de la calidad. Orientación sobre las técnicas estadísticas para la Norma ISO 9001:2015

Estado: Withdrawn / 2022-10

Samples for scientific surveys in market, opinion and social research - Quality criteria and documentation requirements

Estado: Withdrawn / 2022-05

Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019); Text in German and English / Note: Date of issue 2020-09-11

Estado: Withdrawn / 2021-11

Sampling; statistical basis; one-way layout

Estado: Withdrawn / 2021-07

Sampling procedures for inspection by attributes; sampling plans indexed by limiting quality (LQ) for isolated lot inspection; identical with ISO 2859-2:1985

Estado: Withdrawn / 2021-07

Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (ISO 2859-2:2020); Text in German and English / Note: Date of issue 2020-09-11

Estado: Withdrawn / 2021-04

Control charts - Part 2: Shewhart control charts (ISO 7870-2:2013)

Estado: Withdrawn / 2021-02

Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels (ISO 2859-4:2002)

Estado: Withdrawn / 2021-01

Control charts - Part 1: General guidelines (ISO 7870-1:2019); Text in German and English / Note: Date of issue 2020-08-21

Estado: Withdrawn / 2021-01

Control charts - Part 2: Shewhart control charts (ISO 7870-2:2013); Text in German and English / Note: Date of issue 2020-09-04

Estado: Withdrawn / 2020-12

Presentation of statistical tables

Número de resultados: 130

Lo más vendido

Normas
Libros