Saltar navegación principal
Estás en: Home>Normas>Buscador de normas>DIN
Normas DIN – AENOR
DIN EN ISO 12217-2/A100:2017-12

DIN EN ISO 12217-2/A100:2017-12

Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015); German version EN ISO 12217-2:2017; Amendment A100 / Note: To be replaced by DIN EN ISO 12217-2 (2021-01).

Petits navires - Évaluation et catégorisation de la stabilité et de la flottabilité - Partie 2: Bateaux à voiles d'une longueur de coque supérieure ou égale à 6 m (ISO 12217-2:2015); Version allemande EN ISO 12217-2:2017; Amendement A100 / Attention: À remplacer par DIN EN ISO 12217-2 (2021-01).

Kleine Wasserfahrzeuge - Stabilitäts- und Auftriebsbewertung und Kategorisierung - Teil 2: Segelboote ab 6 m Rumpflänge (ISO 12217-2:2015); Deutsche Fassung EN ISO 12217-2:2017; Änderung A100 / Achtung: Vorgesehener Ersatz durch DIN EN ISO 12217-2 (2021-01).

2017-12 /Active
Idiomas Disponibles:
Inglés, Alemán
Equivalencias internacionales:

EN ISO 12217-2 (2017-09)

ISO 12217-2 (2015-10)

Relación con otras normas DIN:
ISO 12217-2:2015 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed.The evaluation of stability and buoyancy properties using ISO 12217-2:2015 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum load.ISO 12217-2:2015 is principally applicable to boats propelled primarily by sail (even if fitted with an auxiliary engine) of 6 m up to and including 24 m hull length. However, it can also be applied to boats less than 6 m if they are habitable multihulls or may be applied if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812.In relation to habitable multihulls, ISO 12217-2:2015 includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation.ISO 12217-2:2015 excludes:inflatable and rigid-inflatable boats covered by ISO 6185, except for references made in ISO 6185 to specific clauses of ISO 12217;gondolas and pedalos;surfboards including sailing surfboards; andhydrofoils and foil stabilized boats when not operating in the displacement mode.ISO 12217-2:2015 does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.
Aquatic sports equipment, Assessment, Boats, Buoyancy, Categories, CE marking, Classification, Design, Equipment safety, Hulls, Inspection, Instructions for use, Length, Marking, Minimum requirements, Navigation, Operating instructions, Overall length, Pleasure boats, Properties, Safety, Safety engineering, Safety of products, Safety requirements, Safety signs, Sailing boats, Sails, Specification (approval), Stability, Stabilization, Testing, Vessels
Idioma Formato

Formato digital

Nota: Precios sin IVA ni gastos de envío

Descuentos no acumulables

Añadir a la cesta