SAE J516_200909
Hydraulic Hose Fittings
| * Aviso PDF secure: |
El documento PDF de las normas SAE descargado quedará bloqueado y no podrá traspasarse a otro ordenador, es monopuesto y monousuario. El usuario final debe tener instalado el sistema de seguridad FILE OPEN PLUG-IN. El documento puede imprimirse una vez. |
|---|---|
| Fecha edición: |
2009-09-17
En Vigor
|
| Idiomas disponibles: | Inglés |
| Resumen: | This SAE Standard provides general and dimensional specifications for the most common hose fittings used in conjunction with hydraulic hoses specified in SAE J517 and utilized in hydraulic systems on mobile and stationary equipment.
The general specifications contained in
Sections 1
through
15
are applicable to all hydraulic hose fittings and supplement the detailed specifications for the 100R-series fittings contained in the later sections of this document.
This document shall be utilized as a procurement document only to the extent agreed upon by the manufacturer and user.
Refer to SAE J517 for specifications of hose and information on hose assemblies. SAE J1273 contains information on application factors affecting hose fittings, hose, and hose assemblies.
THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE J516 FITTINGS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF THE TWO WORKING PRESSURE RATED VALUES.
The following are hose fitting types contained in this document:
a
Male dryseal pipe thread hose fittings shall be as shown in
Figure 2
for the respective styles, and in
Table 2
for the applicable hoses and sizes.
b
Male straight thread O-ring hose fittings shall be as shown in
Figure 3
or the respective styles, and in
Table 3
for the applicable hoses and sizes.
c
Male 37° flare hose fittings shall be as shown in
Figure 4
for the respective styles, and in
Table 4
for the applicable hoses and sizes.
d
Female 37° flare hose fittings shall be as shown in
Figures 5
to
5B
for the respective styles and shapes, and in
Tables 5
to
5B
for the applicable hoses and sizes.
e
Male 45° flare hose fittings shall be as shown by the 37° figures and tables.
f
Female 45° flare hose fittings shall be as shown by the 37° figures and tables.
g
Male flareless 24° cone hose fittings shall be as shown in
Figure 6
and in
Table 6
for the applicable hoses and sizes.
h
Female flareless 24° cone hose fittings shall be as shown in
Figure 7
and in
Table 7
for the applicable hoses and sizes.
i
4-bolt split flange hose fittings shall be as shown in
Figures 8
to
8F
for the respective styles and shapes, and in
Tables 8
to
8F
for the applicable hoses and sizes.
j
Male O-ring face seal hose fittings shall be as shown in
Figure 9
for the respective styles, and in
Table 9
for the applicable hoses and sizes.
k
Female O-ring face seal hose fittings shall be as shown in
Figures 10
to
10B
for the respective styles, and
Tables 10
to
10B
for the applicable hoses and sizes.
It is recommended that where step sizes or additional types of fittings are required, they be designed to conform with the specifications of this document insofar as they may apply. The following general specifications shall supplement the dimensional data contained in the tables with respect to all unspecified detail. |
| CTN: | |
|
Otras Relaciones |
Crossreference J517_201612 Crossreference J846_201511 Crossreference J476_201302 Crossreference J1273_201409 Crossreference J514_202411 Crossreference J518/2_202312 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
