DIN SPEC 91441:2019-12
Packaging - Test method for determination of the peel strength of sealable packaging materials / Note: To be replaced by DIN 91441 (2026-06).
| Fecha edición: |
2019-12-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés |
| Resumen: | This DIN SPEC in accordance with the PAS procedure has been drawn up by a DIN SPEC (PAS)-consortium set up on a temporary basis. This DIN SPEC (PAS) has been developed and approved by the authors named in the foreword. This DIN SPEC (PAS) defines requirements for the test set-up and parameters of a reproducible and practicable test method that can be used to determine the peel strength of sealable packaging material combinations on strip-shaped specimens. This strength determination will then be used to evaluate the suitability of this type of packaging for the manufacture of easy-to-open packaging. Furthermore, the peel strength determined using this DIN SPEC can be used as a specification parameter. This DIN SPEC is aimed at packaging manufacturers, packers and machine builders. Prerequisite for the application of the test method is that at least one sealing partner consists of flexible packaging material or can be easily deformed / bent. |
| Keywords: | Adhesion|Auxiliary means of packaging|Combination|Cut-off forces|Definitions|Handling|Means of packaging|Packages|Packaging|Packaging material|Packaging materials|Peel strength|Seal|Sealing|Strength of materials|Testing |
| ICS: | 55.020 - Embalajes y distribución de mercancías en general |
| CTN: | |
|
Reemplazo Normas |
Reemplaza a DIN SPEC 91441:2019-06 |










