Normas SAE
Filtrar:
SAE
SAE
SAE J3227_202604
En Vigor
2026-04-01
Terminology and Measurement Methodology for Determining Vehicle Overlap
in Offset-Frontal Crashes
SAE
SAE ARP5987B
En Vigor
2026-04-01
A Process for Utilizing Aerospace Propulsion Health Management Systems
for Airworthiness Credit
SAE
SAE AMS5766G
En Vigor
2026-04-01
Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Forging Stock,
21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe, (Alloy 800), Solution Heat Treated
SAE
SAE
SAE AMS4241F
En Vigor
2026-04-25
Aluminum Alloy Castings, 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6),
Solution and Precipitation Heat Treated, Dendrite Arm Spacing (DAS) Controlled
SAE
SAE J2999_202604
En Vigor
2026-04-13
Determination of the Effective Projected Luminous Lens Area (EPLLA) by
Design Analysis
SAE
SAE AS3623C
En Vigor
2026-04-19
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK,
COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN
SAE
SAE AMS4978K
En Vigor
2026-04-12
Titanium Alloy Bars, Wire, Forgings, and Rings, 6Al - 6V - 2Sn, Annealed
SAE
SAE AMS4214L
En Vigor
2026-04-23
Castings, Aluminum Alloy Sand, 5.0Si - 1.2Cu - 0.50Mg (355.0-T71),
Solution Heat Treated and Overaged
SAE
SAE
SAE
SAE AS3178C
En Vigor
2026-04-23
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL
SHANK, AMS5643 (UNS S17400), 140 KSI, .4375-20 UNJF-3A
SAE
SAE AMS4108G
En Vigor
2026-04-20
Aluminum Alloy, Hand Forgings, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr
(7050-T7452), Solution Heat Treated, Compression Stress-Relieved, and Overaged
SAE
SAE AS3248E
En Vigor
2026-04-26
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK,
NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A
SAE
SAE J3155_202604
En Vigor
2026-04-12
Camera Monitor Systems Test Protocols and Performance Requirements
SAE
SAE AMS6543H
En Vigor
2026-05-07
Steel, Bars and Forgings and Forging Stock, 2.0Cr - 10Ni - 8.0Co - 1.0Mo
(0.10 - 0.14C) (HY-180), Double Vacuum Melted, Solution Heat Treated,
Marage Hardenable
SAE
SAE J1739_202605
En Vigor
2026-05-08
Potential Failure Mode and Effects Analysis (FMEA) Including Design
FMEA, Supplemental FMEA-MSR, and Process FMEA
SAE
SAE
