AENOR Logo

Normas SAE

50081 Resultados disponibles

Filtrar:

(30310)
(19771)
SAE

SAE AMS3801/2C
En Vigor
2016-10-11
Cloth, Parachute, Meta-Aramid, Low Modulus 6.5 (220) Weight, Special Weave
SAE

SAE AMS4207D
En Vigor
2024-06-10
Aluminum Alloy Sheet, Alclad, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61), Solution and Precipitation Heat Treated
SAE

SAE AMS4314E
En Vigor
2018-07-25
Aluminum Alloy Rings, Rolled or Forged 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T651, 2014-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
SAE

SAE AMS2516F
En Vigor
2018-11-26
Polytetrafluoroethylene (PTFE) Resin Coating, High Build, 370 to 400 °C (698 to 752 °F) Fusion
SAE

SAE AMS3065H
En Vigor
2021-08-06
Compound, Corrosion Preventive Thin Film, Fingerprint Removing
SAE

SAE AMS3892/12A
En Vigor
2016-12-15
Tow, Carbon Fiber For Structural Composites 730 (5033) Tensile Strength, 41 (283) Tensile Modulus
SAE

SAE AMS2672H
En Vigor
2022-09-08
Brazing, Aluminum Torch or Furnace
SAE

SAE AMS1540D
En Vigor
2018-04-10
Cleaner, Thrust Reverser Water-Base
SAE

SAE AMS3100/1B
En Vigor
2008-12-15
Adhesion Promoter for Polysulfide Sealing Compounds Nonhalogenated Solvent
SAE

SAE AMS3329D
En Vigor
2023-10-16
Elastomer: Fluorosilicone Rubber (FVMQ), Fuel and Oil Resistant, High Strength, 45 – 55 Shore A Hardness, For Products in Fuel Systems / Lubricating Oils
SAE

SAE AMS3894/4B
En Vigor
1994-12-01
Graphite Fiber Tape and Sheet, Epoxy Resin Impregnated, G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 180 (82)
SAE

SAE AMS3730
En Vigor
1991-10-15
Potting Compound, Foamed Epoxy Type, Amine Hardened
SAE

SAE AS6321-3
En Vigor
1953-08-26
AS6321 Filler Cap Base - without Vent
SAE

SAE AS5372A
En Vigor
2023-03-27
Fuse, Current Limiter Type, Aircraft
SAE

SAE AS85049/96A_A2
En Vigor
2001-07-01
Connector Accessories, Electrical, Mounting Device, Flange Type, Category 7, 1/4 Perimeter
SAE

SAE AS85421/16E
En Vigor
2022-10-26
FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON RUN, MALE ENDS
SAE

SAE AS85049/114D
En Vigor
2021-07-30
CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF-LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
SAE

SAE AS9531B
En Vigor
2015-08-14
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A
SAE

SAE AS9881C
En Vigor
2024-04-23
NUT, PLAIN, HEXAGON, CADMIUM PLATED, UNS G87400, 125 KSI MIN
SAE

SAE AS7100/1B
En Vigor
2008-08-13
National Aerospace and Defense Contractors Accreditation Program (NADCAP) Survey Checklists for the NDT Suppliers Accreditation Program