Normas SAE
Filtrar:
SAE
SAE AMS4892D
En Vigor
2022-05-12
Alloy Castings, Corrosion- and Heat-Resistant 66Ni - 29Cu - 4.0Si As Cast
SAE
SAE AMS5526J
En Vigor
2007-02-02
Steel Sheet, Strip, and Plate, Corrosion and Heat Resistant, 19.5Cr -
9.5Ni - 1.4Mo - 1.4W - 0.42(Cb+Ta) - 0.22Ti, Solution Heat Treated
SAE
SAE AMS5532J
En Vigor
2022-01-17
Iron Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 30Fe -
21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb(Nb) - 0.15N Solution Heat Treated
SAE
SAE AMS5586J
En Vigor
2024-12-05
Nickel Alloy, Corrosion- and Heat-Resistant, Welded Tubing 57Ni - 19.5Cr
- 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr (Waspaloy) Consumable
Electrode Remelted or Vacuum Induction Melted, Annealed
SAE
SAE
SAE
SAE AMS5651L
En Vigor
2024-10-01
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical
Tubing, Rings, and Stock for Forging and Rings, 25Cr - 20Ni (310),
Solution Heat Treated
SAE
SAE AMS4900S
En Vigor
2023-07-24
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379
MPa) Yield Strength
SAE
SAE AMS4966S
En Vigor
2022-10-13
Titanium Alloy, Forgings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
SAE
SAE
SAE AMS5402D
En Vigor
2023-05-16
Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Ni -
21.5Cr - 9.0Mo - 3.6Cb (Nb) As Cast
SAE
SAE AMS5328E
En Vigor
2017-08-04
Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo (0.28 - 0.36C) (SAE
4330 Modified) Annealed
SAE
SAE AMS5395D
En Vigor
2018-03-04
Alloy Iron Castings, Ductile, Sand, Corrosion Resistant 22Ni (2.5 -
3.0C) As Cast
SAE
SAE AMS4040R
En Vigor
2025-02-25
Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024-O
with 1-1/2% Alclad) Annealed
SAE
SAE AMS2632C
En Vigor
2022-06-02
Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under
in Cross-Sectional Thickness
SAE
SAE AMS3279D
En Vigor
2013-03-12
Sealing Compound, Sprayable For Integral Fuel Tanks and Fuel Cell
Cavities, For Intermittent Use to 350 °F (177 °C)
SAE
SAE AMS3373/2B
En Vigor
2012-01-17
Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion
Resistant, Medium Viscosity, Room Temperature Cure
SAE
SAE AMS3870E
En Vigor
2016-06-24
Ceramic Moldings and Extrusions Dense, Ultra-High Alumina (99% Al2O3)
SAE
SAE AMS4017M
En Vigor
2024-01-16
Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-H34)
Strain-Hardened, Half-Hard, and Stabilized
SAE
