Normas DIN
Filtrar:
DIN
DIN 8061:2016-05
En Vigor
2016-05-01
Unplasticized polyvinyl chloride (PVC-U) pipes - General quality
requirements, testing; Text in German and English
DIN
DIN EN 1451-1:2018-10
En Vigor
2018-10-01
Plastics piping systems for soil and waste discharge (low and high
temperature) within the building structure - Polypropylene (PP) - Part
1: Specifications for pipes, fittings and the system; German version EN 1451-1:2017+AC:2018
DIN
DIN EN 15119-1:2025-09
En Vigor
2025-09-01
Biological durability of wood and wood-based products - Determination of
emissions from preservative treated wood to the environment - Part 1:
Wood held in the storage yard after treatment and wooden commodities
exposed in Use Class 3 (not covered, not in contact with the ground) -
Laboratory method; German version EN 15119-1:2025
DIN
DIN 53438-1:1984-06
En Vigor
1984-06-01
Testing of combustible materials; response to ignition by a small flame;
general data
DIN
DIN 54841-5:2015-09
En Vigor
2015-09-01
Plastic warning devices for underground cables and pipelines - Part 5:
Cable cover
DIN
DIN 5466-1:2000-10
En Vigor
2000-10-01
Splined joints, calculation of load capacity - Part 1: General basis
DIN
DIN 5480-1:2025-10
En Vigor
2025-10-01
Involute splines based on reference diameters - Part 1: Generalities
DIN
DIN
DIN
DIN 7164:2017-03
En Vigor
2017-03-01
Geometrical product specifications (GPS) - Workshop plug gauges and
spherical plug gauges for inside diameters with tolerance class
according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm
nominal size - Deviations and tolerances for gauges
DIN
DIN 74:2020-01
En Vigor
2020-01-01
Countersinks for countersunk head screws, except countersunk head screws
with heads according to DIN EN 27721
DIN
DIN 79009:2026-02
En Vigor
2026-02-01
EPAC bicycles - Environmental test - Safety aspects / Note: DIN SPEC
79009 (2018-10) remains valid alongside this standard until 2026-07-31.
DIN
DIN 75201:2024-06
En Vigor
2024-06-01
Determination of the fogging characteristics of trim materials in the
interior of automobiles
DIN
DIN 7500-1:2021-07
En Vigor
2021-07-01
Thread forming screws for ISO metric thread - Part 1: Technical
specifications for case hardened and tempered screws
DIN
DIN 13-21:2005-08
En Vigor
2005-08-01
ISO general purpose metric screw threads - Part 21: Limits of sizes for
fine pitch threads with the preferred tolerance classes; Nominal
diameter from 1 mm to 24,5 mm
DIN
DIN 13-23:2005-08
En Vigor
2005-08-01
ISO general purpose metric screw threads - Part 23: Limits of sizes for
fine pitch threads with the prefered tolerance classes; Nominal diameter
from 53 mm to 110 mm
DIN
DIN 13-20:2000-08
En Vigor
2000-08-01
ISO general purpose metric screw threads - Part 20: Limits of sizes for
coarse pitch threads with the prefered tolerance classes; nominal sizes
from 1 mm to 68 mm
DIN
DIN 13-22:2025-10
En Vigor
2025-10-01
ISO general purpose metric screw threads - Part 22: Limits of sizes for
fine pitch threads with the preferred tolerance classes; Nominal
diameter from 25 mm to 52 mm
DIN
DIN 1284:1990-11
En Vigor
1990-11-01
Grease guns; grease cartridges for lever type-hand gun; main dimensions
DIN
DIN 16941:2012-11
En Vigor
2012-11-01
Thermoplastics extruded profiles - General tolerances of size, form and
orientation / Note: To be replaced by DIN 16941 (2024-09).
DIN
DIN 16086:2006-01
En Vigor
2006-01-01
Electrical pressure measuring instruments - Pressure transmitters,
pressure measuring instruments - Concepts, specifications on data sheets
DIN
DIN
DIN 16965-1:1982-07
En Vigor
1982-07-01
Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type A
pipes, dimensions
DIN
DIN 18040-3:2023-01
En Vigor
2023-01-01
Construction of accessible buildings - Design principles - Part 3:
Public circulation areas and open spaces / Note: Date of issue
2022-12-02*Intended as replacement for DIN 18040-3 (2014-12).
DIN
DIN 18014:2023-06
En Vigor
2023-06-01
Earthing systems for buildings - Planning, execution and documentation /
Note: DIN 18014 (2014-03) remains valid alongside this standard until 2024-06-01.
DIN
DIN 17560-1:2004-02
En Vigor
2004-02-01
Ferrosilicon and Silicon - Part 1: Technical delivery conditions for ferrosilicon
DIN
DIN 17560-2:2004-02
En Vigor
2004-02-01
Ferrosilicon and Silicon - Part 2: Technical delivery conditions for silicon
DIN
DIN 19704-2:2014-11
En Vigor
2014-11-01
Hydraulic steel structures - Part 2: Design and manufacturing
DIN
DIN
DIN 1986-100:2016-12
En Vigor
2016-12-01
Drainage systems on private ground - Part 100: Specifications in
relation to DIN EN 752 and DIN EN 12056 / Note: To be replaced by DIN
1986-100 (2025-06).
DIN
DIN 19704-1:2014-11
En Vigor
2014-11-01
Hydraulic steel structures - Part 1: Criteria for design and calculation
DIN
DIN 25201-7 Berichtigung 1:2007-06
En Vigor
2007-06-01
Design guide for railway vehicles and their components - Bolted joints -
Part 7: Installation, Corrigenda to DIN 25201-7:2004-06
DIN
DIN 25201-7:2004-06
En Vigor
2004-06-01
Design guide for railway vehicles and their components - Bolted joints -
Part 7: Installation / Note: To be replaced by DIN 25201-7 (2010-03).
DIN
DIN 25201-4:2021-11
En Vigor
2021-11-01
Design guide for railway vehicles and their components - Bolted joints -
Part 4: Securing of bolted joints
DIN
DIN 25201-1:2015-12
En Vigor
2015-12-01
Design guide for railway vehicles and their components - Bolted joints -
Part 1: Classification of bolted joints
DIN
DIN 3967:1978-08
En Vigor
1978-08-01
System of Gear Fits; Backlash, Tooth Thickness Allowances, Tooth
Thickness Tolerances; Principles
DIN
DIN 3990-16:2020-05
En Vigor
2020-05-01
Calculation of load capacity of cylindrical gears - Part 16:
Determination of the micro-pitting load-carrying capacity of lubricants
using FZG-test-method GT-C/8,3/90
DIN
DIN
DIN
DIN 43673-1:1982-02
En Vigor
1982-02-01
Drilled holes and screw connections for busbars; Rectangular cross
section busbars
